- WLUG - wlug.mailman3.com

Re: [Wlug] WLUG Meeting tomorrow! Jun 11th, 2015! Native ZFS on linux!

by Keith Wright

Tim Keller <turbofx(a)gmail.com> writes: > > Sick of your limited file systems? Worried it won't scale when pentabyte > disks hit the market? There have been five byte storage devices since 1945. Expensive, but available. They were called mercury delay lines. On the other hand a petabyte (+1e+15 bytes) would be a lot. > I'll be doing a talk/demo of the ZFS (Zettabyte File > System) naively running on Linux. This time I really am puzzled. Do you mean "natively"? That would be a cliche. What you said passes spell check would be good for us simple French folk. > This is going to be held in the campus center Rm. 129 a.k.a "Chairman's > Room" at 7pm. The web page still says TBD. No matter, I intend to be there, but if I were lost with only an Apple Eye BrowServer for guidance... > Refreshments will be provided. Good. I am less cranky when my mouth is full. See you in the future, if you're going that way. -- Keith

June 11, 2015

WLUG Meeting tomorrow! Jun 11th, 2015! Native ZFS on linux!

by Tim Keller

Hey Everybody, Sick of your limited file systems? Worried it won't scale when pentabyte disks hit the market? Good news, I've got a file system for you! I'll be doing a talk/demo of the ZFS (Zettabyte File System) naively running on Linux. This is going to be held in the campus center Rm. 129 a.k.a "Chairman's Room" at 7pm. Refreshments will be provided. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 10, 2015

Re: [Wlug] WLUG meeting this week

by Tim Keller

Definitely! I'll make sure that Chuck gets the slides, etc. On Wed, Jun 10, 2015 at 11:10 AM, Joel <joelgroup(a)gmail.com> wrote: > > I am bummed out that home / requirements / life will keep me away from the > WLUG meeting this week. > > Very interested in learning about ZFS details, tips and configuration for > the home NAS I am currently building. > > Any chance post meeting you could share your ZFS slides and info either on > WLUG site or via email? > > Thank you, > > Joel > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 10, 2015

WLUG meeting this week

by Joel

I am bummed out that home / requirements / life will keep me away from the WLUG meeting this week. Very interested in learning about ZFS details, tips and configuration for the home NAS I am currently building. Any chance post meeting you could share your ZFS slides and info either on WLUG site or via email? Thank you, Joel

June 10, 2015

WLUG Meeting Thursday June 11th, 2015 Topic: ZFS on linux! NEW LOCATION!!!

by Tim Keller

The next WLUG meeting is June 11th, 2015. @ 7pm. NOTE: THE MEETING WILL BE IN THE CAMPUS CENTER RM 129 aka "Chairman's Room" I will be speaking about native ZFS on linux. I'll go into the structure of ZFS and its design principles, and how it's used in production. I'll then do a demo showing off what ZFS can do and I'll create a bunch of different FS types, etc. It should be a blast. Like usual there will be refreshments available. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 8, 2015

Next Meeting June 11th, 2015: Topic: ZFS on linux

by Tim Keller

Hey Everybody, Our next meeting is going to be on June 11th, 2015 @ 7:00pm. The topic is going to be "ZFS on linux". What is ZFS? ZFS is a logical volume manager (LVM), raid subsystem and a file system combined. I'll be doing a deep dive on how ZFS works on linux, it's strengths and weaknesses. Snacks and refreshments will be available. I'm working with Frank to verify the location. Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 1, 2015

Re: [Wlug] Next Meeting Topic: ZFS on linux?

by Frank Sweetser

Sounds good to me, and the comparison part would be timely with RHEL7 pushing XFS. ---- Sent from my Android device with K-9 Mail. Please excuse my brevity. On May 18, 2015 11:49:00 AM EDT, Tim Keller <turbofx(a)gmail.com> wrote: >Hey Gang, > >Would people find it interesting in doing either a ZFS centric meeting, >or >doing a compare/contrast Linux file system bonanza? > >Thanks, >Tim.

May 18, 2015

Next Meeting Topic: ZFS on linux?

by Tim Keller

Hey Gang, Would people find it interesting in doing either a ZFS centric meeting, or doing a compare/contrast Linux file system bonanza? Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

May 18, 2015

Re: [Wlug] Great Meeting last night! Thanks Frank and Jeff!

by Jamie Guinan

Agreed, great meeting. I learned several things from Frank's talk, I had no idea about the "hot plate" and temperature issues. And it was cool to see Jeff's machine in action, despite the hiccups. I should go to more meetings. #sophisticatedcat -Jamie On Fri, 15 May 2015, Tim Keller wrote: > Hey Everybody, > > Last nights meeting was great. A big hardy thanks to Jeff and Frank for > lugging in the printers and showing them off and giving us all a great > education on modelers, slicers and printing software. > > Here are links to things that were talked about: > > 3d Printers: > Kossel <http://reprap.org/wiki/Kossel> > printrbot-plus <http://printrbot.com/shop/assembled-metal-printrbot-plus/> > > Modelers: > openscad <http://www.openscad.org/> > tinkercad <https://www.tinkercad.com/> > > Slicers: > slic3r.org > > Printer Driving Software: > Octoprint <http://octoprint.org/> > > Thanks, > Tim. > > -- > I am leery of the allegiances of any politician who refers to their > constituents as "consumers". >

May 16, 2015

Great Meeting last night! Thanks Frank and Jeff!

by Tim Keller

Hey Everybody, Last nights meeting was great. A big hardy thanks to Jeff and Frank for lugging in the printers and showing them off and giving us all a great education on modelers, slicers and printing software. Here are links to things that were talked about: 3d Printers: Kossel <http://reprap.org/wiki/Kossel> printrbot-plus <http://printrbot.com/shop/assembled-metal-printrbot-plus/> Modelers: openscad <http://www.openscad.org/> tinkercad <https://www.tinkercad.com/> Slicers: slic3r.org Printer Driving Software: Octoprint <http://octoprint.org/> Thanks, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

May 15, 2015