- WLUG - wlug.mailman3.com

Re: [Wlug] routing table question

by doug waud

Bill Mills-Curran wrote: > > My routing table definitely looks wrong to me: > > > route > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > 192.168.1.0 millie.mills.cu 255.255.255.0 UG 0 0 0 eth0 > 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 > 127.0.0.0 * 255.0.0.0 U 0 0 0 lo > default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 > > Comments? "Comments/" is a dangerous thing to write :-) The second line looks right to me. The first line then becomes suspect since you do not need a gateway (as in the G of UG) to the network you are part of. In turn, that default on the last line also makes me suspicious. To set up my default gateway, I type something like route add default gw 192.168.1.1 and I get a line in the route -n output that looks like 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 with no default in the first position but rather the more reasonable 0.0.0.0 which, with the rest of the line says to go to 192.168.1.1 for anything outside of the local network. The combination of these two features makes me wonder whether you are mistyping the route command to set up the GW line. When I get something like those two lines I get rid of them and reenter what I then hope to be :-) a more syntactically correct route command and then check route -n to see if I got it right. Hope this helps a bit. :-) > And, "route" hangs for a while before printing the last line. I can't comment on that :-( doug -- Douglas R Waud 17 Lantern Lane, Shrewsbury, MA, 01545-2006 http://www.ummed.edu/pub/d/drw/

June 6, 2001

Re: [Wlug] routing table question

by Scott Venier

The hanging is because it's trying to do a DNS lookup on 192.168.1.1. running it with the -n switch will fix that. Could you paste the output of route -n to us? I'd like to see what ip address millie.mills.cu is. And include the output of 'ifconfig eth0' just so we have a complete picture. Scott On Tue, 5 Jun 2001, Bill Mills-Curran wrote: > My routing table definitely looks wrong to me: > > > route > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > 192.168.1.0 millie.mills.cu 255.255.255.0 UG 0 0 0 eth0 > 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 > 127.0.0.0 * 255.0.0.0 U 0 0 0 lo > default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 > > > And, "route" hangs for a while before printing the last line. My > network response is fine. > > Comments? > > TIA, > Bill > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

June 6, 2001

routing table question

by Bill Mills-Curran

My routing table definitely looks wrong to me: > route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 millie.mills.cu 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 127.0.0.0 * 255.0.0.0 U 0 0 0 lo default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 And, "route" hangs for a while before printing the last line. My network response is fine. Comments? TIA, Bill

June 6, 2001

Re: [Wlug] dual PII/PIII motherboard of questionable origin up for grabs

by Brian J. Conway

> I'd be interested. I'm currently running a dual P5-233 > system, and I'd really like to upgrade it. I'd consider > donating my older board and CPUs (or some proceeds from > its sale) to the WLUG/WPILA if it works out OK. Please > let me know. Sorry, it's been claimed. Brian J. Conway dogbert(a)clue4all.net

June 5, 2001

Re: [Wlug] dual PII/PIII motherboard of questionable origin up for grabs

by Paul Gelinas

Brian, I'd be interested. I'm currently running a dual P5-233 system, and I'd really like to upgrade it. I'd consider donating my older board and CPUs (or some proceeds from its sale) to the WLUG/WPILA if it works out OK. Please let me know. PaulG -- Paul Gelinas pgelinas(a)mediaone.net MCP, MCP+I, MCSE

June 5, 2001

Re: [Wlug] Handspring & Linux

by William Smith

On Mon, 4 Jun 2001, Doctor Orbitz wrote: DO>I have done it, works great. I spent teh 20 bucks on teh serial cradle and DO>found out i didnt' even need it. DO>http://www.linux.org/docs/ldp/howto/mini/Handspring-Visor-2.html was very DO>helpful. I use coldsync (its on freshmeat) very direct program and I like DO>it. Great! thanks for the pointer! i was leaning towards the serial cradle, but if i can save $20..... ;) ...Bill

June 5, 2001

Re: [Wlug] Handspring & Linux

by ccb＠acm.org

I use the Handspring Backup Module. It goes in the slot. It's $40. Push one button and you're backed up. ccb -- Charles C. Bennett, Jr. VA LiNUX Systems Systems Engineer, Northeast US 25 Burlington Mall Rd., Suite 300 +1 617 543-6513 Burlington, MA 01803-4145 ccb(a)valinux.com www.valinux.com

June 5, 2001

Re: [Wlug] ssh2 -> openssh

by Theo Van Dinter

On Mon, Jun 04, 2001 at 11:45:46PM -0400, Bill Mills-Curran wrote: > Since I could not find a ready-build openssl and openssh rpm for 6.1, I > build openssh 2.9p1 and openssl 0l.6.6a. On my 7.0 box, I used the rpm's > from the distro. I've been using packaged openssl and openssh on my 6.1 box for a while now: > rpm -qa | grep ^openss openssh-2.9p1-1 openssl-0.9.5a-14 openssh-clients-2.9p1-1 openssh-server-2.9p1-1 openssl-devel-0.9.5a-14 > rpm -q redhat-release redhat-release-6.1-1 You can grab RPMs from: ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/rpm/RH62 or ftp://ftp.kluge.net/pub/linux/RPMS -- Randomly Generated Tagline: "What kind of birth control do the Centauri use? Conversation." - J. Michael Straczynski

June 5, 2001

Re: [Wlug] ssh2 -> openssh

by Charles R. Anderson

On Mon, 4 Jun 2001, Bill Mills-Curran wrote: subssn> Since I could not find a ready-build openssl and openssh subssn> rpm for 6.1, I build openssh 2.9p1 and openssl 0l.6.6a. subssn> On my 7.0 box, I used the rpm's from the distro. You can take the SRPM from Red Hat 7.0 and rebuild it on 6.x like so: rpm --rebuild --define 'build_6x 1' openssh-2.5.2p2-1.7.2.src.rpm (You need to have installed at least openssl and openssl-devel for this to work. These come with Red Hat 6.2. I would recommend installing all the 6.2 updates on your 6.1 system before doing this.) If you want 2.9p1 (for 6.x or 7.x) I have made packages available (but these are not completely tested yet. I do know of problems on Alpha at least. Use at your own risk). I would not use the 2.9p1 src.rpm distributed by the OpenSSH portability team, since it does not contain all the necessary things for it to work correctly on Red Hat (for instance, correct PAM files.): ftp://angus.ind.wpi.edu/pub/cra-contrib/redhat6/SRPMS/openssh-2.9p1-0.6x.sr… subssn> I'm wondering if I'm running into basic code problems, or subssn> is it likely that the ssh2 installation needs some careful subssn> manual cleanup prior to decommission it. OpenSSH uses fairly different config files that are reminiscent of the old ssh 1.2 from which it was derived. A clean RPM install should handle these sorts of issues for you assuming you pay attention to any files that are installed as *.rpmnew and rename/merge them with the old files. subssn> I'm back running ssh2, but I'd like to stick with open subssn> source, if possible. Suggestions? For now, I would recommend staying with the Red Hat-packaged openssh-2.5.2p2-1.7.2 from RH 7.0, rebuilding it on 6.2, and installing that. This set up should be the most stable configuration available for Red Hat. Other than that, the only other thing I can recommend is either upgrading to Red Hat 6.2 or at least installing all of the 6.1 updates followed by the 6.2 updates. (Red Hat only supports/releases updates for the latest minor release within a major release). Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ PGP Key ID: 49BB5886 Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886

June 5, 2001

ssh2 -> openssh

by Bill Mills-Curran

Tonight I tried (briefly) to convert to openssh from ssh2, and I ran into trouble. Maybe someone has an idea. The two machines in question are at RedHat 6.1 and RedHat 7.0. I built ssh2 (version 2.4.0) on each machine, and the install went smoothly on both sides. I have been happy with it. Then a friend suggested openssh. So I thought I'd try to convert. Since I could not find a ready-build openssl and openssh rpm for 6.1, I build openssh 2.9p1 and openssl 0l.6.6a. On my 7.0 box, I used the rpm's from the distro. I deinstalled the ssh2 code using "make install". I did not try to remove any other files, but I did stop all ssh2 processes. The install of the openssh code went just fine. I could log into my 7.0 box from my 6.1 box (I can't go the other way due to a company firewall), but the port mapping did not work. (I used the "-R 19999:box1:23" to give me access back through the company firewall.) I'm wondering if I'm running into basic code problems, or is it likely that the ssh2 installation needs some careful manual cleanup prior to decommission it. I'm back running ssh2, but I'd like to stick with open source, if possible. Suggestions? Thanks, Bill

June 5, 2001