- WLUG - wlug.mailman3.com

Re: [Wlug] Hyper Terminal into SUN SPARC ULTRA??

by Eric Martin

Need to edit /etc/inittab. I'm not at my pc right now so I can't give exacts but basically copy one of the tty lines and replace the terminal with ttyS0 ot ttyS1 (your serial interface) On 1/1/09, Ken Jones <kjones(a)ziplink.net> wrote: > > I still have not solved how to get my AURORA LINUX package to see the added > SBUS quad ethernet card in my SUN SPARC ULTRA --so---> > > I am after some of the files that I have stored on this SAMBA server. > > I figured I could use Hyper Terminal. I have an appropriate cross over > cable with a 24 pin connector to plug into the SPARC's Terminal A or > Terminal B. > > I can configure Hyper Terminal on my PC running WINDOWS XP. > > I am stuck figuring out how to get the SUN to activate this asynchronous > interface. > > Any suggestions? > > Ken Jones (suddenly feeling very elderly)

Jan. 2, 2009

Hyper Terminal into SUN SPARC ULTRA??

by Ken Jones

I still have not solved how to get my AURORA LINUX package to see the added SBUS quad ethernet card in my SUN SPARC ULTRA --so---> I am after some of the files that I have stored on this SAMBA server. I figured I could use Hyper Terminal. I have an appropriate cross over cable with a 24 pin connector to plug into the SPARC's Terminal A or Terminal B. I can configure Hyper Terminal on my PC running WINDOWS XP. I am stuck figuring out how to get the SUN to activate this asynchronous interface. Any suggestions? Ken Jones (suddenly feeling very elderly)

Jan. 2, 2009

ACM Swapmeet

by Bob Breznak

Hey, I just wanted to remind you about the ACM Swapmeet. Its a chance to swap, buy and sell computer and other equipment and stuff. We had a great turn out last year and are expecting a similar turn out for this year. For more info go to the swapmeet site: http://acm.wpi.edu/swapmeet - Bob ------------------ Bob Breznak 908 672 2841 robert.breznak(a)gmail.com Senior Assistant for Computer Science ACM President UPE President IEEE Webmaster

Jan. 1, 2009

Re: [Wlug] Problem Sparc ULTRA 1 not seeing SBus Fast Ethernet

by William Smith

On Mon, Dec 29, 2008 at 5:11 PM, Eric Martin <freak4uxxx(a)gmail.com> wrote: > What does lsmod show? Also, are you rolling your own kernels or using > stock disro ones? I'm not familiar w/aurora Aurora is a Linux distro for SPARC-based systems. It is based on the Fedora SRPMs. The second "stable" build of Aurora (2.0) is based on Fedora Core 3, and the Corona Tree is an almost feature complete tree based on Fedora Core 6. (This, according to the Aurora Status notes.) You can find more info on Aurora and download it at http://auroralinux.org/ . Bill Smith Fall River, MA Charter Member of LOPSA > On 12/28/08, Ken Jones <kjones(a)ziplink.net> wrote: >> I have a Sparc Ultra 1 which has been running flawlessly since 2003 running >> Ansel 2.4.20-2.3sparc. >> >> Last week after a nine day power outage the system no longer activates eth0, >> the TPE ethernet interface. >> >> I installed a --> >> >> Sun 501-5443 x1049A quad 4-port SBus Fast Ethernet card >> >> The operating system does not recognize this new hardware. >> >> This system has been running so flawlessly for at least four years that I >> have forgotten much of what I had learned about Aurora.(I am an elderly man >> by high tech standards). >> >> The little green input light corresponding to the port to which I have >> attached the fast ethernet cable does illuminate. >> >> Where do I start? >> >> Ken Jones >> >> > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Dec. 29, 2008

Re: [Wlug] Problem Sparc ULTRA 1 not seeing SBus Fast Ethernet

by Eric Martin

What does lsmod show? Also, are you rolling your own kernels or using stock disro ones? I'm not familiar w/aurora On 12/28/08, Ken Jones <kjones(a)ziplink.net> wrote: > I have a Sparc Ultra 1 which has been running flawlessly since 2003 running > Ansel 2.4.20-2.3sparc. > > Last week after a nine day power outage the system no longer activates eth0, > the TPE ethernet interface. > > I installed a --> > > Sun 501-5443 x1049A quad 4-port SBus Fast Ethernet card > > The operating system does not recognize this new hardware. > > This system has been running so flawlessly for at least four years that I > have forgotten much of what I had learned about Aurora.(I am an elderly man > by high tech standards). > > The little green input light corresponding to the port to which I have > attached the fast ethernet cable does illuminate. > > Where do I start? > > Ken Jones > >

Dec. 29, 2008

Problem Sparc ULTRA 1 not seeing SBus Fast Ethernet

by Ken Jones

I have a Sparc Ultra 1 which has been running flawlessly since 2003 running Ansel 2.4.20-2.3sparc. Last week after a nine day power outage the system no longer activates eth0, the TPE ethernet interface. I installed a --> Sun 501-5443 x1049A quad 4-port SBus Fast Ethernet card The operating system does not recognize this new hardware. This system has been running so flawlessly for at least four years that I have forgotten much of what I had learned about Aurora.(I am an elderly man by high tech standards). The little green input light corresponding to the port to which I have attached the fast ethernet cable does illuminate. Where do I start? Ken Jones

Dec. 29, 2008

Re: [Wlug] A second Aurora - SPARC question....

by Eric Martin

Frank Sweetser wrote: > Eric Martin wrote: >> Have you tried to ping the loopback address? I know that a fried card >> won't respond to lo replies (127.0.0.1) in Windows, but I'm not sure >> what the behavior is in *NIX. That being said, if the loopback >> interface isn't up then we have our answer. > > That trick won't work under any self-respecting 'nix clone. Unix based > systems have a virtual interface that gets configured with 127.0.0.1/8, and > doesn't care about the state of our physical adapters. > > The reason that works at all under Windows is because Windows doesn't actually > have a loopback interface device driver. (okay, technically there is one, but > it's not installed by default.) Instead, there's some special casing in the > IP stack that makes it consider 127.0.0.1 a hidden, non-removable IP alias on > each regular network interface. > > As a side note, if you're on the same local network as the victime, you can > often leverage this gross hack to bypass Windows firewall rules by sending it > packets with the correct destination MAC address and an IP address of 127.0.0.1. > Very cool hack! Thanks for the info on NIX and lo, I figured it might be different altogether but I wasn't sure. -- Eric Martin Key fingerprint = D1C4 086E DBB5 C18E 6FDA B215 6A25 7174 A941 3B9F

Dec. 23, 2008

Re: [Wlug] Driver for SUN SBUS ethernet card.

by Chuck Anderson

On Tue, Dec 23, 2008 at 03:27:59PM -0500, Ken Jones wrote: > My SUN ULTRA 1 has lost its eth0 card circuit. > I have purchased a > Sun 501-5443 X1049A Quad 4-Port SBus > Fast Ethernet Card for my SUN ULTRA 1 running Aurora. > The original fast ethernet circuitry is part of the SystemCard. I > do not wish to replace the system card. Will I have a problem > finding a driver? I would suggest checking out some of the docs on the Aurora Wiki, and also perhaps asking your question on the Aurora Sparc Linux list, as there are lots of Sun experts there. http://wiki.auroralinux.net/wiki/ http://auroralinux.org/#mailinglists

Dec. 23, 2008

Driver for SUN SBUS ethernet card.

by Ken Jones

My SUN ULTRA 1 has lost its eth0 card circuit. I have purchased a Sun 501-5443 X1049A Quad 4-Port SBus Fast Ethernet Card for my SUN ULTRA 1 running Aurora. The original fast ethernet circuitry is part of the SystemCard. I do not wish to replace the system card. Will I have a problem finding a driver? Ken Jones

Dec. 23, 2008

Re: [Wlug] A second Aurora - SPARC question....

by Chuck Anderson

On Tue, Dec 23, 2008 at 06:24:52AM -0500, Eric Martin wrote: > Have you tried to ping the loopback address? I know that a fried card > won't respond to lo replies (127.0.0.1) in Windows, but I'm not sure > what the behavior is in *NIX. That being said, if the loopback > interface isn't up then we have our answer. The loopback interface is a separate interface that has no relation whatsoever to any real device.

Dec. 23, 2008