- WLUG - wlug.mailman3.com

Re: = sign in a ls-l ?

by Kevin Stratton

Sorry for the delay, I have just restarted work so I was busy with life related stuff. My NAS box is an X86, so that might explain why I could not get PI-Hole working. I also noticed significant disk thrashing when I left pi-hole running long enough (even though I could not configure it). My personal suspicion is that some kind of permission needs to be set top allow configuration. Pi-Hole is currently uninstalled until I get more than 2G ram for the NAS box. I do plan to run memtest86 immediately after installing the additional ram. I did get docker to run by running "sudo ash" before running the docker commands. Obviously the SSH login did not provide root permission even though I used the admin account. On 6/29/2022 4:32 PM, John Stoffel wrote: >>>>>> "Kevin" == Kevin Stratton via WLUG <wlug(a)lists.wlug.org> writes: > Kevin> I am having trouble with getting pi-hole working with my > Kevin> Asustore NAS. > > Is this NAS box based on ARM processors? As I understand (stood?) > pihole only runs on ARM based linux for some reason or other. I too > looked into this a while ago, it wasn't setup at all to run on a > debian x86_64 system at all. > > Kevin> I think I have traced it down to an issue with > Kevin> the docker install. I did verify that the docker CE (community > Kevin> edition) was also installed. > > Kevin> Per a tutorial about docker, I should be able to run something like > Kevin> hello world and it will install. I may not have the name correctly > Kevin> entered, but I do not think in this case it matters (yet) > > But in general, I think you need to run docker as root so that it has > the permissions to do stuff properly. But I only have one docker > container running, so that's what I do. > > John > > > Kevin> admin@AS5202T-7085:/var/run $ docker run hello-world > > Kevin> docker: Got permission denied while trying to connect to the Docker > Kevin> daemon socket at unix:///var/run/docker.sock: Post > Kevin> "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/create": dial unix > Kevin> /var/run/docker.sock: connect: permission denied. > > Kevin> See 'docker run --help'. > > Kevin> admin@AS5202T-7085:/var/run $ > > Kevin> When I did a ls -l of /var/run in a ssh session, I got the following: > > Kevin> srw-rw---- 1 root root 0 Jun 24 19:57 docker.sock= > > Kevin> The "=" is something I am not familiar with. Could it mean that the > Kevin> symbolic link is to itself? > > Kevin> I could not find any references to this online and could not replicate > Kevin> this experimenting with ln in my Ubuntu distribution. > > > > > Kevin> _______________________________________________ > Kevin> WLUG mailing list -- wlug(a)lists.wlug.org > Kevin> To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Kevin> Create Account: https://wlug.mailman3.com/accounts/signup/ > Kevin> Change Settings: https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Kevin> Web Forum/Archive: https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/SQVT5…

July 3, 2022

Re: = sign in a ls-l ?

by John Stoffel

>>>>> "Kevin" == Kevin Stratton via WLUG <wlug(a)lists.wlug.org> writes: Kevin> I am having trouble with getting pi-hole working with my Kevin> Asustore NAS. Is this NAS box based on ARM processors? As I understand (stood?) pihole only runs on ARM based linux for some reason or other. I too looked into this a while ago, it wasn't setup at all to run on a debian x86_64 system at all. Kevin> I think I have traced it down to an issue with Kevin> the docker install. I did verify that the docker CE (community Kevin> edition) was also installed. Kevin> Per a tutorial about docker, I should be able to run something like Kevin> hello world and it will install. I may not have the name correctly Kevin> entered, but I do not think in this case it matters (yet) But in general, I think you need to run docker as root so that it has the permissions to do stuff properly. But I only have one docker container running, so that's what I do. John Kevin> admin@AS5202T-7085:/var/run $ docker run hello-world Kevin> docker: Got permission denied while trying to connect to the Docker Kevin> daemon socket at unix:///var/run/docker.sock: Post Kevin> "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/create": dial unix Kevin> /var/run/docker.sock: connect: permission denied. Kevin> See 'docker run --help'. Kevin> admin@AS5202T-7085:/var/run $ Kevin> When I did a ls -l of /var/run in a ssh session, I got the following: Kevin> srw-rw---- 1 root root 0 Jun 24 19:57 docker.sock= Kevin> The "=" is something I am not familiar with. Could it mean that the Kevin> symbolic link is to itself? Kevin> I could not find any references to this online and could not replicate Kevin> this experimenting with ln in my Ubuntu distribution. Kevin> _______________________________________________ Kevin> WLUG mailing list -- wlug(a)lists.wlug.org Kevin> To unsubscribe send an email to wlug-leave(a)lists.wlug.org Kevin> Create Account: https://wlug.mailman3.com/accounts/signup/ Kevin> Change Settings: https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ Kevin> Web Forum/Archive: https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/SQVT5…

June 29, 2022

Re: = sign in a ls-l ?

by Daniel Walsh

On 6/24/22 22:56, Theo Van Dinter via WLUG wrote: > The = is from "ls -F", it means it's a socket file (which we also see > from the "s" file type in "ls -l" and the filename is also a good > indicator). > > I have no experience with docker, but the error message and other > quoted bits implies you're running things as user "admin" which I'd > guess doesn't have user or group root privileges so you can't write to > the file. > If you are attempting to run containers without being root, I would recommend that you use Podman rather then Docker. It is much more secure. > > On Fri, Jun 24, 2022, 22:23 Kevin Stratton via WLUG > <wlug(a)lists.wlug.org> wrote: > > I am having trouble with getting pi-hole working with my Asustore > NAS. > I think I have traced it down to an issue with the docker install. I > did verify that the docker CE (community edition) was also installed. > > Per a tutorial about docker, I should be able to run something like > hello world and it will install. I may not have the name correctly > entered, but I do not think in this case it matters (yet) > > > admin@AS5202T-7085:/var/run $ docker run hello-world > > docker: Got permission denied while trying to connect to the Docker > daemon socket at unix:///var/run/docker.sock: Post > "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/create": dial > unix > /var/run/docker.sock: connect: permission denied. > > See 'docker run --help'. > > admin@AS5202T-7085:/var/run $ > > When I did a ls -l of /var/run in a ssh session, I got the following: > > srw-rw---- 1 root root 0 Jun 24 19:57 docker.sock= > > The "=" is something I am not familiar with. Could it mean that the > symbolic link is to itself? > > I could not find any references to this online and could not > replicate > this experimenting with ln in my Ubuntu distribution. > > > > > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/SQVT5… > > > _______________________________________________ > WLUG mailing list --wlug(a)lists.wlug.org > To unsubscribe send an email towlug-leave(a)lists.wlug.org > Create Account:https://wlug.mailman3.com/accounts/signup/ > Change Settings:https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive:https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org…

June 25, 2022

Re: = sign in a ls-l ?

by Theo Van Dinter

The = is from "ls -F", it means it's a socket file (which we also see from the "s" file type in "ls -l" and the filename is also a good indicator). I have no experience with docker, but the error message and other quoted bits implies you're running things as user "admin" which I'd guess doesn't have user or group root privileges so you can't write to the file. On Fri, Jun 24, 2022, 22:23 Kevin Stratton via WLUG <wlug(a)lists.wlug.org> wrote: > I am having trouble with getting pi-hole working with my Asustore NAS. > I think I have traced it down to an issue with the docker install. I > did verify that the docker CE (community edition) was also installed. > > Per a tutorial about docker, I should be able to run something like > hello world and it will install. I may not have the name correctly > entered, but I do not think in this case it matters (yet) > > > admin@AS5202T-7085:/var/run $ docker run hello-world > > docker: Got permission denied while trying to connect to the Docker > daemon socket at unix:///var/run/docker.sock: Post > "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/create": dial unix > /var/run/docker.sock: connect: permission denied. > > See 'docker run --help'. > > admin@AS5202T-7085:/var/run $ > > When I did a ls -l of /var/run in a ssh session, I got the following: > > srw-rw---- 1 root root 0 Jun 24 19:57 docker.sock= > > The "=" is something I am not familiar with. Could it mean that the > symbolic link is to itself? > > I could not find any references to this online and could not replicate > this experimenting with ln in my Ubuntu distribution. > > > > > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/SQVT5… >

June 25, 2022

= sign in a ls-l ?

by Kevin Stratton

I am having trouble with getting pi-hole working with my Asustore NAS. I think I have traced it down to an issue with the docker install. I did verify that the docker CE (community edition) was also installed. Per a tutorial about docker, I should be able to run something like hello world and it will install. I may not have the name correctly entered, but I do not think in this case it matters (yet) admin@AS5202T-7085:/var/run $ docker run hello-world docker: Got permission denied while trying to connect to the Docker daemon socket at unix:///var/run/docker.sock: Post "http://%2Fvar%2Frun%2Fdocker.sock/v1.24/containers/create": dial unix /var/run/docker.sock: connect: permission denied. See 'docker run --help'. admin@AS5202T-7085:/var/run $ When I did a ls -l of /var/run in a ssh session, I got the following: srw-rw---- 1 root root 0 Jun 24 19:57 docker.sock= The "=" is something I am not familiar with. Could it mean that the symbolic link is to itself? I could not find any references to this online and could not replicate this experimenting with ln in my Ubuntu distribution.

June 25, 2022

Re: Reminder: Meeting tonight! Topic: Intel Pocket PC (and possible give away!)

by hammerron

Hey Tim/Everyone, Speaking for myself, Worcester works better for me. Ron On 6/16/22 13:58, Tim Keller via WLUG wrote: > Hey Everybody! > > We've got a meeting tonight!! > Location: Hudson Public Library > Time: 7pm > Topic: Intel Pocket PC running RetroArch, etc. > > I was given four of these tiny pocket pc's. I'm going to run RetroArch > on one and see what we get. I also think they'd be cool as a plex > driver for a TV as well. > > Beyond that, there's a lot going on in the linux world, from the Intel > pay for features stuff to the Nvidia opening up ( a tiny bit ). > > We should also talk about where we'd like to host meetings. I reached > out to Frank and it looks like WPI is back on the table. Would that > work better for people? > > See ya there! > Tim. > > > -- > I am leery of the allegiances of any politician who refers to their > constituents as "consumers". > > _______________________________________________ > WLUG mailing list --wlug(a)lists.wlug.org > To unsubscribe send an email towlug-leave(a)lists.wlug.org > Create Account:https://wlug.mailman3.com/accounts/signup/ > Change Settings:https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive:https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org…

June 18, 2022

Re: Reminder: Meeting tonight! Topic: Intel Pocket PC (and possible give away!)

by John Stoffel

Yeah, I was out busy last night so couldn't make it. Hope the meeting went well. Hudson has been fine, but Worcester also works for me since I'm in the middle. Moving it around to new locations to make it easy for people isn't a bad idea.

June 17, 2022

Re: Reminder: Meeting tonight! Topic: Intel Pocket PC (and possible give away!)

by Kevin Stratton

Will the same video conference link be used? On 6/16/2022 2:04 PM, Joel via WLUG wrote: > > Cannot make it tonight on vacation with family. > > For future meetings, either WPI or a more Worcester-ish location would > help. > > Joel > > > > On June 16, 2022 7:58:23 PM Tim Keller via WLUG <wlug(a)lists.wlug.org> > wrote: > >> Hey Everybody! >> >> We've got a meeting tonight!! >> Location: Hudson Public Library >> Time: 7pm >> Topic: Intel Pocket PC running RetroArch, etc. >> >> I was given four of these tiny pocket pc's. I'm going to run >> RetroArch on one and see what we get. I also think they'd be cool as >> a plex driver for a TV as well. >> >> Beyond that, there's a lot going on in the linux world, from the >> Intel pay for features stuff to the Nvidia opening up ( a tiny bit ). >> >> We should also talk about where we'd like to host meetings. I reached >> out to Frank and it looks like WPI is back on the table. Would that >> work better for people? >> >> See ya there! >> Tim. >> >> >> -- >> I am leery of the allegiances of any politician who refers to their >> constituents as "consumers". >> _______________________________________________ >> WLUG mailing list -- wlug(a)lists.wlug.org <mailto:wlug%40lists.wlug.org> >> To unsubscribe send an email to wlug-leave(a)lists.wlug.org >> <mailto:wlug-leave%40lists.wlug.org> >> Create Account: https://wlug.mailman3.com/accounts/signup/ >> <https://wlug.mailman3.com/accounts/signup/> >> Change Settings: >> https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ >> <https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/> >> Web Forum/Archive: >> https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/PNIHE… >> <https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/PNIHE…> >> > > > _______________________________________________ > WLUG mailing list --wlug(a)lists.wlug.org > To unsubscribe send an email towlug-leave(a)lists.wlug.org > Create Account:https://wlug.mailman3.com/accounts/signup/ > Change Settings:https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive:https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org…

June 16, 2022

Re: Reminder: Meeting tonight! Topic: Intel Pocket PC (and possible give away!)

by Joel

Cannot make it tonight on vacation with family. For future meetings, either WPI or a more Worcester-ish location would help. Joel On June 16, 2022 7:58:23 PM Tim Keller via WLUG <wlug(a)lists.wlug.org> wrote: > Hey Everybody! > > We've got a meeting tonight!! > Location: Hudson Public Library > Time: 7pm > Topic: Intel Pocket PC running RetroArch, etc. > > I was given four of these tiny pocket pc's. I'm going to run RetroArch on one and see what we get. I also think they'd be cool as a plex driver for a TV as well. > > Beyond that, there's a lot going on in the linux world, from the Intel pay for features stuff to the Nvidia opening up ( a tiny bit ). > > We should also talk about where we'd like to host meetings. I reached out to Frank and it looks like WPI is back on the table. Would that work better for people? > > See ya there! > Tim. > > > -- > > I am leery of the allegiances of any politician who refers to their constituents as "consumers". > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/PNIHE…

June 16, 2022

Reminder: Meeting tonight! Topic: Intel Pocket PC (and possible give away!)

by Tim Keller

Hey Everybody! We've got a meeting tonight!! Location: Hudson Public Library Time: 7pm Topic: Intel Pocket PC running RetroArch, etc. I was given four of these tiny pocket pc's. I'm going to run RetroArch on one and see what we get. I also think they'd be cool as a plex driver for a TV as well. Beyond that, there's a lot going on in the linux world, from the Intel pay for features stuff to the Nvidia opening up ( a tiny bit ). We should also talk about where we'd like to host meetings. I reached out to Frank and it looks like WPI is back on the table. Would that work better for people? See ya there! Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 16, 2022