- WLUG - wlug.mailman3.com

Re: [Wlug] Problem starting gdesklets on login

by Eric 'Freak4u' Martin

There's some setting that will exec programs on startup under gnome. It's in gnome, under sessions I think...I'm installing gnome right now so I can find it exactly. On Wed, 16 Mar 2005 11:50:54 -0500, Andrew Robert <arobert(a)townisp.com> wrote: > I am using gnome under FC3. > > Jared Greenwald wrote: > > >You using kde or gnome? > > > >On Wed, 16 Mar 2005 08:50:00 -0500, Andrew Robert <arobert(a)townisp.com> wrote: > > > > > >>Good morning everyone, > >> > >>I recently installed gdesklets on FC3 and it works fine except it does > >>not start automatically on login. > >> > >>I've tried saving the gnome session but the gdesklets are not captured. > >> > >>I've also tried automatinng the start by adding the call to my > >>.bash_profile file but that doesn't do the trick either. > >> > >>Does anyone know how to overcome this issue? > >> > >>Any help you can provide would be greatly appreciated. > >> > >>-- > >>Thank you, > >>Andrew Robert > >>Systems Architect > >>Information Technologies - OpenVMS > >>Massachusetts Financial Services > >>Phone: (617) 954-5882 > >>Pager: (781) 945-1742 > >>E-mail: arobert(a)mfs.com > >> > >>_______________________________________________ > >>Wlug mailing list > >>Wlug(a)mail.wlug.org > >>http://mail.wlug.org/mailman/listinfo/wlug > >> > >> > >> > >_______________________________________________ > >Wlug mailing list > >Wlug(a)mail.wlug.org > >http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > > -- > Thank you, > Andrew Robert > Systems Architect > Information Technologies - OpenVMS > Massachusetts Financial Services > Phone: (617) 954-5882 > Pager: (781) 945-1742 > E-mail: arobert(a)mfs.com > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

March 16, 2005

Re: [Wlug] Problem starting gdesklets on login

by Andrew Robert

I am using gnome under FC3. Jared Greenwald wrote: >You using kde or gnome? > >On Wed, 16 Mar 2005 08:50:00 -0500, Andrew Robert <arobert(a)townisp.com> wrote: > > >>Good morning everyone, >> >>I recently installed gdesklets on FC3 and it works fine except it does >>not start automatically on login. >> >>I've tried saving the gnome session but the gdesklets are not captured. >> >>I've also tried automatinng the start by adding the call to my >>.bash_profile file but that doesn't do the trick either. >> >>Does anyone know how to overcome this issue? >> >>Any help you can provide would be greatly appreciated. >> >>-- >>Thank you, >>Andrew Robert >>Systems Architect >>Information Technologies - OpenVMS >>Massachusetts Financial Services >>Phone: (617) 954-5882 >>Pager: (781) 945-1742 >>E-mail: arobert(a)mfs.com >> >>_______________________________________________ >>Wlug mailing list >>Wlug(a)mail.wlug.org >>http://mail.wlug.org/mailman/listinfo/wlug >> >> >> >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > > > -- Thank you, Andrew Robert Systems Architect Information Technologies - OpenVMS Massachusetts Financial Services Phone: (617) 954-5882 Pager: (781) 945-1742 E-mail: arobert(a)mfs.com

March 16, 2005

Re: [Wlug] Problem starting gdesklets on login

by Jared Greenwald

You using kde or gnome? On Wed, 16 Mar 2005 08:50:00 -0500, Andrew Robert <arobert(a)townisp.com> wrote: > Good morning everyone, > > I recently installed gdesklets on FC3 and it works fine except it does > not start automatically on login. > > I've tried saving the gnome session but the gdesklets are not captured. > > I've also tried automatinng the start by adding the call to my > .bash_profile file but that doesn't do the trick either. > > Does anyone know how to overcome this issue? > > Any help you can provide would be greatly appreciated. > > -- > Thank you, > Andrew Robert > Systems Architect > Information Technologies - OpenVMS > Massachusetts Financial Services > Phone: (617) 954-5882 > Pager: (781) 945-1742 > E-mail: arobert(a)mfs.com > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

March 16, 2005

Problem starting gdesklets on login

by Andrew Robert

Good morning everyone, I recently installed gdesklets on FC3 and it works fine except it does not start automatically on login. I've tried saving the gnome session but the gdesklets are not captured. I've also tried automatinng the start by adding the call to my .bash_profile file but that doesn't do the trick either. Does anyone know how to overcome this issue? Any help you can provide would be greatly appreciated. -- Thank you, Andrew Robert Systems Architect Information Technologies - OpenVMS Massachusetts Financial Services Phone: (617) 954-5882 Pager: (781) 945-1742 E-mail: arobert(a)mfs.com

March 16, 2005

Re: [Wlug] Fetchmail

by John Stoffel

>> fetchmail -c -v -u foobar(a)domain.com mail.domain.com Dennis> I did try that without the -v and got this for the password prompt: Dennis> Enter password for foobar@domain.com@mail.domain.com: This is possibly a fetchmail thing, I'd check to make sure you're running the latest version. Dennis> I assumed that the reason it failed was that it was sending Dennis> that as the user name. Turns out that ther verbose Dennis> information shows that it is sending the appropriate Dennis> information despite what the prompt shows. It also now Dennis> succeeds so I must need to wait a little bit after creating Dennis> the email account through the web administration. The verbose option is the key when using fetchmail. It's a great tool which works wonders, but can be a pain to get going right sometimes. Of course, that's all the various protocols fault, not fetchmails. John

March 16, 2005

Re: [Wlug] Fetchmail

by Keith Wright

> From: Dennis Payne <dulsi(a)identicalsoftware.com> > > Nope. I'm not talking about one account that collects a > bunch of emails and dropping them in the appropriate > mailbox. > > The POP3 server is mail.domain.com. The login account is > foobar(a)domain.com. Surely you log in as just "foobar", no? You have to have gotten through the domain name system and be connected to a definite port on a definite IP address before you even get the login prompt. > Fetchmail allows you to specify the > username of foobar to which it adds @mail.domain.com. > This fails because the login account doesn't include > "mail.". (Or at least that is my read of the document > they provide for grabbing the email.) > > So I want to stop or change what it adds to the username. I don't know why it would add anything. The POP server knows who you are because you tell it USER <name>. The RFC (rfc 1939) doesn't say much about how you spell your name, but in my experience it's just the part before the "@". If the server has mail for you, it should give it to you, no matter what the name or alias of the machine that accepted it from the SMTP server. To get mail for me (kwright on this machine) from mail.speakeasy.net (kawright on that machine, which belongs to the ISP), I put the following in .fetchmailrc. It does not matter if that mail came to me via speakeasy.net or an alias like free-comp-shop.com. skip spk via mail.speakeasy.net protocol pop3 username "kawright" password "****", is "kwright" here limit 20000 The "skip" means it is not automatic, I have to ask for it by name. I do this because I have accounts on more than one machine and like to control which one I fetch from. Thus: /usr/bin/fetchmail -v gis spk -- Keith

March 16, 2005

Re: [Wlug] Fetchmail

by Dennis Payne

> fetchmail -c -v -u foobar(a)domain.com mail.domain.com I did try that without the -v and got this for the password prompt: Enter password for foobar@domain.com@mail.domain.com: I assumed that the reason it failed was that it was sending that as the user name. Turns out that ther verbose information shows that it is sending the appropriate information despite what the prompt shows. It also now succeeds so I must need to wait a little bit after creating the email account through the web administration. Thanks for the help. (Should have checked for a verbose option myself.) Dennis Payne dulsi(a)identicalsoftware.com

March 16, 2005

Re: [Wlug] Fetchmail

by Dennis Payne

Nope. I'm not talking about one account that collects a bunch of emails and dropping them in the appropriate mailbox. The POP3 server is mail.domain.com. The login account is foobar(a)domain.com. Fetchmail allows you to specify the username of foobar to which it adds @mail.domain.com. This fails because the login account doesn't include "mail.". (Or at least that is my read of the document they provide for grabbing the email.) So I want to stop or change what it adds to the username. Dennis Payne dulsi(a)identicalsoftware.com

March 15, 2005

Fetchmail

by Dennis Payne

Such a simple question yet I can't seem to find an answer. I'm trying to use fetchmail to retrieve from a POP3 account. The POP3 server includes mail in the server name (mail.domain.com) The email accounts do not include mail. Unfortunately fetchmail seems to take the supplied username and add the mail server name. So I get foobar(a)mail.domain.com instead of foobar(a)domain.com. (Or foobar@domain.com@mail.domain.com if I try to specify the server name.) Is there an option I need to specify (or maybe upgrade fetchmail)? Dennis Payne dulsi(a)identicalsoftware.com

March 15, 2005

Re: [Wlug] Fetchmail

by John Stoffel

Dennis> Nope. I'm not talking about one account that collects a bunch Dennis> of emails and dropping them in the appropriate mailbox. Ok, that's clearer. It would still help if you could show us your existing .fetchmailrc file... Dennis> The POP3 server is mail.domain.com. The login account is Dennis> foobar(a)domain.com. Fetchmail allows you to specify the Dennis> username of foobar to which it adds @mail.domain.com. This Dennis> fails because the login account doesn't include "mail.". (Or Dennis> at least that is my read of the document they provide for Dennis> grabbing the email.) Ok, here's what I would try: fetchmail -c -v -u foobar(a)domain.com mail.domain.com and see what happens. You could also put the following in our .fetchmailrc file: poll mail.domain.com protocol pop3 username "foobar(a)domain.com" \ password "secret1" All on one line. Then do: fetchmail -v -c and see what happens. Sending us the logs would be helpful. Sanitize them of course, but at least let us see how the protocol negotiation goes, otherwise we're not going to be able to help you. John

March 15, 2005