- WLUG - wlug.mailman3.com

Re: [Wlug] last sparc64 gentoo question - I promise

by Jamie Guinan

On Thu, 24 May 2007, ken jones wrote: > I succeeded in doing: > #emerge --sync > #emerge portage > Then I tried > #emerge xorg-x11 > overnight. I woke up to find this had failed on step 101 out of 133. That's actually rather good progress. :) > ------------------- > The first two emerge's completed, emerge xorg-x11 did not. Below is > stdout. Looking at the log it appears that stddef.h is missing... > -----------snip--------- > makedepend: warning: clientattrib.c (reading /usr/include/gconv.h, line > 31): cannot find include file "stddef.h" > ---------snip---------- > Right at the end stdout said, "!!! If you need support, post the > topmost build error, and the call stack if relevant." > I have no idea what this means. Do you? > Any suggestions what I do now? My guess is to just try again. I found this, http://www.nabble.com/emerge-xorg-xll--fails-out-at-media-libs-mesa-6.5-r3-… See the post from Donnie Berkholz near the bottom, where he suggests # eselect opengl set xorg-x11 Then try, # emerge -ptv xorg-x11 [ this will show you what's going to be merged ] # emerge xorg-x11 [ ok, try again...] -Jamie > Ken Jones > ========================================== > -------------------snip of emerge failure step 101 out of > 133---------------- > >>> Emerging (101 of 133) media-libs/mesa-6.5.1-r1 to / > >>> Downloading > 'http://distfiles.gentoo.org/distfiles/MesaLib-6.5.1.tar.bz2' > --00:50:32-- http://distfiles.gentoo.org/distfiles/MesaLib-6.5.1.tar.bz2 > => `/usr/portage/distfiles/MesaLib-6.5.1.tar.bz2' > Resolving distfiles.gentoo.org... 156.56.247.195, 216.165.129.135, > 64.50.236.52, ... > Connecting to distfiles.gentoo.org|156.56.247.195|:80... connected. > HTTP request sent, awaiting response... 200 OK > Length: 3,138,257 (3.0M) [application/x-tar] > > 100%[===============================================================================>] > 3,138,257 523.02K/s ETA 00:00 > > 00:50:38 (503.34 KB/s) - `/usr/portage/distfiles/MesaLib-6.5.1.tar.bz2' > saved [3138257/3138257] > > * checking ebuild checksums ;-) > ... > [ ok ] > * checking auxfile checksums ;-) > ... > [ ok ] > * checking miscfile checksums ;-) > ... > [ ok ] > * checking MesaLib-6.5.1.tar.bz2 ;-) > ... > [ ok ] > * QA Notice: USE Flag 'amd64-fbsd' not in IUSE for media-libs/mesa-6.5.1-r1 > * QA Notice: USE Flag 'kernel_FreeBSD' not in IUSE for > media-libs/mesa-6.5.1-r1 > >>> Unpacking source... > >>> Unpacking MesaLib-6.5.1.tar.bz2 to > /var/tmp/portage/media-libs/mesa-6.5.1-r1/work > * Applying 6.5.1-freebsd-dri.patch > ... > [ ok ] > * Removing DO_DEBUG defs in dri drivers... > * Sparc assembly code is not working; deactivating > >>> Source unpacked. > >>> Compiling source in > /var/tmp/portage/media-libs/mesa-6.5.1-r1/work/Mesa-6.5.1 ... > (cd configs && rm -f current && ln -s linux-dri current) > . > . <<=============many steps in here=========>> > . > clientattrib.c: In function `__glFreeAttributeState': > clientattrib.c:131: error: dereferencing pointer to incomplete type > clientattrib.c:132: error: dereferencing pointer to incomplete type > make[3]: *** [clientattrib.o] Error 1 > make[3]: Leaving directory > `/var/tmp/portage/media-libs/mesa-6.5.1-r1/work/Mesa-6.5.1/src/glx/x11' > make[2]: *** [subdirs] Error 1 > make[2]: Leaving directory > `/var/tmp/portage/media-libs/mesa-6.5.1-r1/work/Mesa-6.5.1/src' > make[1]: *** [default] Error 1 > make[1]: Leaving directory > `/var/tmp/portage/media-libs/mesa-6.5.1-r1/work/Mesa-6.5.1' > make: *** [linux-dri] Error 2 > > !!! ERROR: media-libs/mesa-6.5.1-r1 failed. > Call stack: > ebuild.sh, line 1615: Called dyn_compile > ebuild.sh, line 972: Called qa_call 'src_compile' > ebuild.sh, line 44: Called src_compile > mesa-6.5.1-r1.ebuild, line 215: Called die > > !!! Build failed > !!! If you need support, post the topmost build error, and the call > stack if relevant. > !!! A complete build log is located at > '/var/tmp/portage/media-libs/mesa-6.5.1-r1/temp/build.log'. > > kjones-sun2 bin # > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

May 24, 2007

Re: [Wlug] last sparc64 gentoo question - I promise

by Mike Frysinger

On Thursday 24 May 2007, ken jones wrote: > The first two emerge's completed, emerge xorg-x11 did not. Below is > stdout. Looking at the log it appears that stddef.h is missing... > -----------snip--------- > makedepend: warning: clientattrib.c (reading /usr/include/gconv.h, line > 31): cannot find include file "stddef.h" > ---------snip---------- no, that is a warning (like it says), not an error ... the makedepend program is kind of crappy when it comes to generating depend files, that's why using gcc's -MM is much preferred ... but that's a different topic > Right at the end stdout said, "!!! If you need support, post the > topmost build error, and the call stack if relevant." > I have no idea what this means. Do you? > Any suggestions what I do now? My guess is to just try again. you could try posting the actual error -mike

May 24, 2007

last sparc64 gentoo question - I promise

by ken jones

I succeeded in doing: #emerge --sync #emerge portage Then I tried #emerge xorg-x11 overnight. I woke up to find this had failed on step 101 out of 133. ------------------- The first two emerge's completed, emerge xorg-x11 did not. Below is stdout. Looking at the log it appears that stddef.h is missing... -----------snip--------- makedepend: warning: clientattrib.c (reading /usr/include/gconv.h, line 31): cannot find include file "stddef.h" ---------snip---------- Right at the end stdout said, "!!! If you need support, post the topmost build error, and the call stack if relevant." I have no idea what this means. Do you? Any suggestions what I do now? My guess is to just try again. Ken Jones ========================================== -------------------snip of emerge failure step 101 out of 133---------------- >>> Emerging (101 of 133) media-libs/mesa-6.5.1-r1 to / >>> Downloading 'http://distfiles.gentoo.org/distfiles/MesaLib-6.5.1.tar.bz2' --00:50:32-- http://distfiles.gentoo.org/distfiles/MesaLib-6.5.1.tar.bz2 => `/usr/portage/distfiles/MesaLib-6.5.1.tar.bz2' Resolving distfiles.gentoo.org... 156.56.247.195, 216.165.129.135, 64.50.236.52, ... Connecting to distfiles.gentoo.org|156.56.247.195|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3,138,257 (3.0M) [application/x-tar] 100%[===============================================================================>] 3,138,257 523.02K/s ETA 00:00 00:50:38 (503.34 KB/s) - `/usr/portage/distfiles/MesaLib-6.5.1.tar.bz2' saved [3138257/3138257] * checking ebuild checksums ;-) ... [ ok ] * checking auxfile checksums ;-) ... [ ok ] * checking miscfile checksums ;-) ... [ ok ] * checking MesaLib-6.5.1.tar.bz2 ;-) ... [ ok ] * QA Notice: USE Flag 'amd64-fbsd' not in IUSE for media-libs/mesa-6.5.1-r1 * QA Notice: USE Flag 'kernel_FreeBSD' not in IUSE for media-libs/mesa-6.5.1-r1 >>> Unpacking source... >>> Unpacking MesaLib-6.5.1.tar.bz2 to /var/tmp/portage/media-libs/mesa-6.5.1-r1/work * Applying 6.5.1-freebsd-dri.patch ... [ ok ] * Removing DO_DEBUG defs in dri drivers... * Sparc assembly code is not working; deactivating >>> Source unpacked. >>> Compiling source in /var/tmp/portage/media-libs/mesa-6.5.1-r1/work/Mesa-6.5.1 ... (cd configs && rm -f current && ln -s linux-dri current) . . <<=============many steps in here=========>> . clientattrib.c: In function `__glFreeAttributeState': clientattrib.c:131: error: dereferencing pointer to incomplete type clientattrib.c:132: error: dereferencing pointer to incomplete type make[3]: *** [clientattrib.o] Error 1 make[3]: Leaving directory `/var/tmp/portage/media-libs/mesa-6.5.1-r1/work/Mesa-6.5.1/src/glx/x11' make[2]: *** [subdirs] Error 1 make[2]: Leaving directory `/var/tmp/portage/media-libs/mesa-6.5.1-r1/work/Mesa-6.5.1/src' make[1]: *** [default] Error 1 make[1]: Leaving directory `/var/tmp/portage/media-libs/mesa-6.5.1-r1/work/Mesa-6.5.1' make: *** [linux-dri] Error 2 !!! ERROR: media-libs/mesa-6.5.1-r1 failed. Call stack: ebuild.sh, line 1615: Called dyn_compile ebuild.sh, line 972: Called qa_call 'src_compile' ebuild.sh, line 44: Called src_compile mesa-6.5.1-r1.ebuild, line 215: Called die !!! Build failed !!! If you need support, post the topmost build error, and the call stack if relevant. !!! A complete build log is located at '/var/tmp/portage/media-libs/mesa-6.5.1-r1/temp/build.log'. kjones-sun2 bin #

May 24, 2007

Re: [Wlug] It boots. Now what?

by Jamie Guinan

On Wed, 23 May 2007, ken jones wrote: > I got HAPPYMEAL to work. My sparc64 is on the WEB! > Here is result of ls -lad /etc/make.profile > ----------snip---------- > kjones-sun2 ~ # ls -lad /etc/make.profile > lrwxrwxrwx 1 root root 58 May 17 12:45 /etc/make.profile -> > ../usr/portage/profiles/default-linux/sparc/sparc64/2006.1 > -----------end snip--------- > Here is result of emerge xorg-x11: How do I install from the tar.bz > file? What is gentoo's equivalent of Red Hat's rpm? That's what gentoo's portage system (via the "emerge" command) does for you - downloads the tarballs, builds, installs, and keeps a record of what's installed under /var/db/pkg/<category>/<package>/ . Well, when it works. :) Look at /usr/portage/media-libs/libpng/*.ebuild, its fairly easy to get the gist of it if you know shell syntax. Did you do "emerge --sync" like some others suggested? I see a few libpng versions available, up to 1.2.16, $ ls /usr/portage/media-libs/libpng/*.ebuild /usr/portage/media-libs/libpng/libpng-1.2.14-r1.ebuild /usr/portage/media-libs/libpng/libpng-1.2.14.ebuild /usr/portage/media-libs/libpng/libpng-1.2.15.ebuild /usr/portage/media-libs/libpng/libpng-1.2.16.ebuild > --------------snip------------- > Lastly, how do you know that HAPPYMEAL is in the sun-hme module? Where > is the information indicating the functionality contained in each module? In the "make menuconfig" [Help] items. Also in menuconfig, you can search all the help text by typing "/" and entering some text. Generally, once you have your system configured to your satisfaction, you keep a copy of the kernel .config, and use that the next time you upgrade the kernel by copying it to the new kernel tree and doing "make oldconfig". -Jamie

May 23, 2007

Re: [Wlug] It boots. Now what?

by ken jones

I got HAPPYMEAL to work. My sparc64 is on the WEB! Here is result of ls -lad /etc/make.profile ----------snip---------- kjones-sun2 ~ # ls -lad /etc/make.profile lrwxrwxrwx 1 root root 58 May 17 12:45 /etc/make.profile -> ../usr/portage/profiles/default-linux/sparc/sparc64/2006.1 -----------end snip--------- Here is result of emerge xorg-x11: How do I install from the tar.bz file? What is gentoo's equivalent of Red Hat's rpm? --------------snip------------- kjones-sun2 / # emerge xorg-x11 Calculating dependencies... done! >>> Emerging (1 of 12) media-libs/libpng-1.2.15 to / >>> Downloading http://distfiles.gentoo.org/distfiles/libpng-1.2.15.tar.bz2 --22:08:01-- http://distfiles.gentoo.org/distfiles/libpng-1.2.15.tar.bz2 => `/usr/portage/distfiles/libpng-1.2.15.tar.bz2' Resolving distfiles.gentoo.org... 216.165.129.135, 64.50.236.52, 64.50.238.52, ... Connecting to distfiles.gentoo.org|216.165.129.135|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 624,008 (609K) [application/x-tar] 100%[===============================================================================>] 624,008 569.34K/s 22:08:02 (568.21 KB/s) - `/usr/portage/distfiles/libpng-1.2.15.tar.bz2' saved [624008/624008] >>> checking ebuild checksums ;-) >>> checking auxfile checksums ;-) >>> checking miscfile checksums ;-) >>> checking libpng-1.2.15.tar.bz2 !!! Missing digest for 'libpng-1.2.15.tar.bz2' ---------------end snip----------- Lastly, how do you know that HAPPYMEAL is in the sun-hme module? Where is the information indicating the functionality contained in each module? Ken Jones Eric Martin wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Make sure that you're building the sun happy meal ethernet card, and > load the module if you're building it as a module. I think it's sun-hme. > > As for building x, you want to > > emerge xorg-x11 > > It looks like your profile might be old, what does > ls -lad /etc/make.profile > > output? Note, don't add a trailing slash to make.profile > ken jones wrote: > >> I would like to get X11 services. I did an "emerge xterm". Here's what >> happened. >> ------------start snip------------- >> (chroot) livecd proc # emerge xterm >> Calculating dependencies | >> !!! All ebuilds that could satisfy ">=x11-proto/xproto-7.0.6" have been >> masked. >> !!! One of the following masked packages is required to complete your >> request: >> - x11-proto/xproto-7.0.7 (masked by: ~sparc keyword) >> - x11-proto/xproto-7.0.10 (masked by: ~sparc keyword) >> - x11-proto/xproto-7.0.9 (masked by: ~sparc keyword) >> >> For more information, see MASKED PACKAGES section in the emerge man page or >> refer to the Gentoo Handbook. >> (dependency required by "x11-libs/libX11-1.1.1-r1" [ebuild]) >> --------------end snip---------- >> >> What do I make of this? >> >> Another problem. My livecd prompt and my chroot prompt both see my >> ethernet card, eth0. However my new boot does not see the card. Ideas? >> >> Ken Jones >> _______________________________________________ >> Wlug mailing list >> Wlug(a)mail.wlug.org >> http://mail.wlug.org/mailman/listinfo/wlug >> >> > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.4.6 (GNU/Linux) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFGU6r7aiVxdKlBO58RAsX7AJ9+7bUiAndQkmdIs1kgpaTCPFNdGgCdHFDS > VLUnEq1EQVgM7JEpsXoPO6I= > =YTx9 > -----END PGP SIGNATURE----- > > > >

May 23, 2007

Re: [Wlug] Followup [Re: Follow-Up to Key Signing Party]

by Eric Martin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 gpg --update-trustdb You might have to do it twice if trusting someone now leads you to trusting someone else. - -eric Gregory Avedissian wrote: > > Jamie Guinan wrote: > (...) >> gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model >> gpg: depth: 0 valid: 1 signed: 12 trust: 0-, 0q, 0n, 0m, 0f, 1u >> gpg: depth: 1 valid: 12 signed: 1 trust: 12-, 0q, 0n, >> 0m, 0f, 0u >> gpg: next trustdb check due at 2009-04-16 > > > Can anyone translate these lines? > > Also, when I signed keys this time, I wasn't asked what level of trust to > attach to my signature. When we did this a few years ago, I remember > having to answer or ignore that question, and my answers appear on those > old sigs. When I tried to edit the trust level on the newly signed keys, > it didn't seem to stick. > > > Greg > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGVCJIaiVxdKlBO58RAj+WAJ0bvjr+a85pP7TC5rwdJJXVVfGGogCfcHQt cNPE0b+ga2YUbSTabwXHbeQ= =blTI -----END PGP SIGNATURE-----

May 23, 2007

Re: [Wlug] Followup [Re: Follow-Up to Key Signing Party]

by Gregory Avedissian

Jamie Guinan wrote: (...) > gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model > gpg: depth: 0 valid: 1 signed: 12 trust: 0-, 0q, 0n, 0m, 0f, 1u > gpg: depth: 1 valid: 12 signed: 1 trust: 12-, 0q, 0n, > 0m, 0f, 0u > gpg: next trustdb check due at 2009-04-16 Can anyone translate these lines? Also, when I signed keys this time, I wasn't asked what level of trust to attach to my signature. When we did this a few years ago, I remember having to answer or ignore that question, and my answers appear on those old sigs. When I tried to edit the trust level on the newly signed keys, it didn't seem to stick. Greg

May 23, 2007

Followup [Re: Follow-Up to Key Signing Party]

by Jamie Guinan

Ok, so I did, gpg --recv-keys ... [everyone's ID from the meeting ] gpg --fingerprint ... [ confirm fingerprints ] for key in ... ; do gpg --sign-key $key; done for key in ... ; do gpg --send-key $key; done Now "gpg --list-keys" shows all the keys I expected to see. And just now I did a "gpg --recv-keys <my ID>" and it said I had 6 new signatures, gpg: requesting key 103BA0B0 from hkp server pgp.mit.edu gpg: key 103BA0B0: "Jamie Guinan <guinan(a)bluebutton.com>" 6 new signatures gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model gpg: depth: 0 valid: 1 signed: 12 trust: 0-, 0q, 0n, 0m, 0f, 1u gpg: depth: 1 valid: 12 signed: 1 trust: 12-, 0q, 0n, 0m, 0f, 0u gpg: next trustdb check due at 2009-04-16 gpg: Total number processed: 1 gpg: new signatures: 6 I think that looks good. At some point I'll look into using it for email and other things, but at least the basics are there. -Jamie

May 23, 2007

Re: [Wlug] I got my sparc64 gentoo on the network

by Chuck Anderson

On Tue, May 22, 2007 at 10:51:20PM -0400, Eric Martin wrote: > Y means compile it into the kernel, so the code is always there. M > means compile it as a module (driver) so you can add / remove the code > as necessary. you can add modules that you want to > /etc/modules.autoload.d/kernel-2.X where x is the minor version number > (4, 6) and the kernel will automatically load the module. The other way > to do this is to > > modprobe <modulename> > > if you only need the code every so often. Or put it in /etc/modprobe.conf to load it on-demand, automatically, as needed. E.g.: alias eth0 sun-hme Don't forget to run depmod -ae after editing that file.

May 23, 2007

Re: [Wlug] I got my sparc64 gentoo on the network

by Eric Martin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Y means compile it into the kernel, so the code is always there. M means compile it as a module (driver) so you can add / remove the code as necessary. you can add modules that you want to /etc/modules.autoload.d/kernel-2.X where x is the minor version number (4, 6) and the kernel will automatically load the module. The other way to do this is to modprobe <modulename> if you only need the code every so often. - -eric ken jones wrote: > Thank you for suggesting that I compare two dmesg boot message outputs. > > "grep eth0" on the dmesg outputthat worked referenced HAPPYMEAL. The > same 'grep' on the boot log that did not work had no HAPPYMEAL string. > > I had a 'CONFIG_HAPPYMEAL=m' line in .config. I changed it to > 'CONFIG_HAPPYMEAL=y' and recompiled using genkernel. > > NOW MY NEWLY BOOTED sparc64 IS NETWORKED. The sky's the limit. :-) > > What I do not understand is how do I know which Module contains which > functionality. If I had stuck with the '=m' config I should be able to > add a module at boot time. How do I know which module to add? > > Ken Jones > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGU6wnaiVxdKlBO58RAr12AJ41AQp/WeY8BqZSNNuC5+o2oZ+snACfTQVZ SVhQJbz7PYgGmryzmRw6UgM= =BUgK -----END PGP SIGNATURE-----

May 23, 2007