- WLUG - wlug.mailman3.com

recommended printer/3-in-1 laser B+W for general (Linux and Windows clients)

by Doug Mildram

Hi! Hope this doesnt start a HUGE preference debate, but I'm taking feedback on what some of you already know to be a "solid" not too big laser black+white, flatbed/top scanner+copier (no top sheet feeder please, adds too much space/width) BUT THE PAIN is always in the PRINTER drivers/software, win or linux, in my experience. Honestly, been battling w/PDF's too long, to an old-ish Brother HL-L2395DW 3-in-1 --I'm working mostly on Linux Mint 19 (a deviant ubuntu I highly recommend for ex-win users) --Printing most things OK. IIRC, didnt have to find Linux drivers the hard way. --Printing PDF's gets iffy. LibreOffice sometimes cures my blues; DocumentViewer is probably the worst, "evince" also iffy, etc. Sometimes "Data received"....ends with a silent chirp, sometimes printer panel indicates a quick reject (nothing printed) saying "Out of Memory", BUT REALLY it's not the job == big, I think it must be a nasty runaway/leaky PDF->driver thing, but if I -- copy/email/send the nasty job to a win7 laptop and use AcroRead, USUALLY gets it done. Until today when ALL seemed to fail, I'm ready to cough up a few $hundred for a better beast, with wired ethernet+USB though I suppose it's pointless to avoid wireLESS interface as long as it does wired ethernet. Oh look! Today's impossible job just came out, from where! Losing my mind. Budget: since not color, I could go over $300 or so, where most of the decent ones sit. Been an HP fan for a long time, but things change, and I'm open to other solid models. Thx!

July 8, 2020

Reminder, we've got a meeting next week!

by Tim Keller

Hey Gang, I hope you're having a happy and healthy safe 4th of July!! We've got a meeting next week! I'm going to give a quick demo on Min.io, we'll do a round table and I'm sure general tom foolery will occur! Our usual Jitsi haunt will be where we'll meet until things improve, though it's looking better for New England and worse for everybody else.. My hope is soon we'll be meeting at Technopia, but until then, we'll keep the candle burning anyway we can! Later, Tim. -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

July 4, 2020

Re: [EXT] Re: [EXT] 3D printing RC planes

by Tim Keller

Check out the https://zesty.tech They make an system that essentially gets you the benefits of direct drive and bowden by remotely driving a feeder with an ultra stiff cable so you don't need to have the stepper on the print head. On Thu, Jun 25, 2020 at 4:33 PM Krichevsky, Nicholas J. via WLUG < wlug(a)lists.wlug.org> wrote: > That direct drive mod looks like something I might invest in... We shall > see how it performs with the Bowden first :) > > Thanks for sending this along! > > Get Outlook for Android <https://aka.ms/ghei36> > ------------------------------ > *From:* Tim Keller via WLUG <wlug(a)lists.wlug.org> > *Sent:* Tuesday, June 23, 2020 8:55:36 PM > *To:* Worcester Linux Users' Group General Discussion <wlug(a)lists.wlug.org > > > *Cc:* Krichevsky, Nicholas J. <njkrichevsky(a)wpi.edu>; Tim Keller < > turbofx(a)gmail.com> > *Subject:* [EXT] [WLUG] Re: [EXT] 3D printing RC planes > > Nicholas, > > There's a company out there that makes a linear rail upgrade kit for the > ender 3 and ender 5. The website is printermods.com > <https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fprintermod…> > > The only thing they bring to the table is they've just assembled the > parts, but still cool nome the less. > > On Tue, Jun 23, 2020, 5:53 PM Krichevsky, Nicholas J. via WLUG < > wlug(a)lists.wlug.org> wrote: > > I just bought an Ender 3 after a failed attempt over the past couple > months of fixing up a printrbot... I might have to check this out once it > gets here! > > Get Outlook for Android > <https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2F…> > ------------------------------ > *From:* Richard Klein via WLUG <wlug(a)lists.wlug.org> > *Sent:* Tuesday, June 23, 2020 5:50:51 PM > *To:* Worcester Linux Users' Group General Discussion <wlug(a)lists.wlug.org > > > *Cc:* Richard Klein <rich(a)richardklein.org> > *Subject:* [EXT] [WLUG] 3D printing RC planes > > I just watched a webinar from these guys. Those of you with 3D printers > might want to check them out. > https://www.3daeroventures.com/ > <https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.3daer…> > > > -- > Rich > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > <https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwlug.mail…> > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > <https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwlug.mail…> > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/A7KMP… > <https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwlug.mail…> > > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/R26VN… > -- I am leery of the allegiances of any politician who refers to their constituents as "consumers".

June 26, 2020

Re: [EXT] Re: [EXT] 3D printing RC planes

by Krichevsky, Nicholas J.

That direct drive mod looks like something I might invest in... We shall see how it performs with the Bowden first :) Thanks for sending this along! Get Outlook for Android<https://aka.ms/ghei36> ________________________________ From: Tim Keller via WLUG <wlug(a)lists.wlug.org> Sent: Tuesday, June 23, 2020 8:55:36 PM To: Worcester Linux Users' Group General Discussion <wlug(a)lists.wlug.org> Cc: Krichevsky, Nicholas J. <njkrichevsky(a)wpi.edu>; Tim Keller <turbofx(a)gmail.com> Subject: [EXT] [WLUG] Re: [EXT] 3D printing RC planes Nicholas, There's a company out there that makes a linear rail upgrade kit for the ender 3 and ender 5. The website is printermods.com<https://nam03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fprintermod…> The only thing they bring to the table is they've just assembled the parts, but still cool nome the less. On Tue, Jun 23, 2020, 5:53 PM Krichevsky, Nicholas J. via WLUG <wlug(a)lists.wlug.org<mailto:wlug@lists.wlug.org>> wrote: I just bought an Ender 3 after a failed attempt over the past couple months of fixing up a printrbot... I might have to check this out once it gets here! Get Outlook for Android<https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Faka.ms%2F…> ________________________________ From: Richard Klein via WLUG <wlug(a)lists.wlug.org<mailto:wlug@lists.wlug.org>> Sent: Tuesday, June 23, 2020 5:50:51 PM To: Worcester Linux Users' Group General Discussion <wlug(a)lists.wlug.org<mailto:wlug@lists.wlug.org>> Cc: Richard Klein <rich(a)richardklein.org<mailto:rich@richardklein.org>> Subject: [EXT] [WLUG] 3D printing RC planes I just watched a webinar from these guys. Those of you with 3D printers might want to check them out. https://www.3daeroventures.com/<https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.3daer…> -- Rich _______________________________________________ WLUG mailing list -- wlug(a)lists.wlug.org<mailto:wlug@lists.wlug.org> To unsubscribe send an email to wlug-leave(a)lists.wlug.org<mailto:wlug-leave@lists.wlug.org> Create Account: https://wlug.mailman3.com/accounts/signup/<https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwlug.mail…> Change Settings: https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/<https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwlug.mail…> Web Forum/Archive: https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/A7KMP…<https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwlug.mail…>

June 25, 2020

Re: [EXT] 3D printing RC planes

by Tim Keller

Nicholas, There's a company out there that makes a linear rail upgrade kit for the ender 3 and ender 5. The website is printermods.com The only thing they bring to the table is they've just assembled the parts, but still cool nome the less. On Tue, Jun 23, 2020, 5:53 PM Krichevsky, Nicholas J. via WLUG < wlug(a)lists.wlug.org> wrote: > I just bought an Ender 3 after a failed attempt over the past couple > months of fixing up a printrbot... I might have to check this out once it > gets here! > > Get Outlook for Android <https://aka.ms/ghei36> > ------------------------------ > *From:* Richard Klein via WLUG <wlug(a)lists.wlug.org> > *Sent:* Tuesday, June 23, 2020 5:50:51 PM > *To:* Worcester Linux Users' Group General Discussion <wlug(a)lists.wlug.org > > > *Cc:* Richard Klein <rich(a)richardklein.org> > *Subject:* [EXT] [WLUG] 3D printing RC planes > > I just watched a webinar from these guys. Those of you with 3D printers > might want to check them out. > https://www.3daeroventures.com/ > <https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.3daer…> > > > -- > Rich > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/A7KMP… >

June 24, 2020

Re: Great meeting last night... but we need topics...

by Tim Keller

Don't worry.. next month will come soon enough!! On Fri, Jun 12, 2020, 9:39 PM John Stoffel via WLUG <wlug(a)lists.wlug.org> wrote: > > Dennis> Argh! I meant to join last night but forgot. > > Same here, work has slowly been taking up my evenings since they all > Cali time... > > I'd like to maybe talk Ansible, and about my experience in > slowly getting upto speed with it and learning how it can make my life > simpler. And harder. > > And how much I hate all those silly simple examples which don't *do* > anything. "Look how easy it is to install Apache and php using > ansible!" type of stupid examples. > > Dennis> I've been working on a new project if people are > Dennis> interested. It is called Gamerzilla. It is an > Dennis> achievement/trophy system for open source games. > > Cool. > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/WQLNI… >

June 24, 2020

Re: 3D printing RC planes

by Jon "maddog" Hall

This reminds me of the R/C model airplanes of my youth. They were not "proportional". They had a single channel that controlled the rudder. As you pulsed the transmitter the plane's rudder went from "center" to "full right" to "center" to "full left" to "center". As they got more sophisticated the rudder went in half-steps, but basically the same cycle. As long as the (gas) engine was running they gracefully climbed, and once the engine ran out of fuel then (hopefully) gracefully glided down. Sometimes it was not so graceful. Many times they ended up in trees. The receiver used a tube and a very heavy battery. The planes typically had a five or six foot wingspan, the fuselage was close to six feet long. The transmitter power leads clipped to your car battery. They would fly from five to ten minutes, limited mostly by the gas tank size and battery life of the receiver. There were a couple of guys who built these (the rest of the hobbyists, my brother included) flew control-line planes..... I never built one (I could not afford it), and so I more or less ignored R/C until thirty years later. All of a sudden there were IC based proportional R/C radios with more channels than a Sony TV that (seemingly) were about the size of a dime and could control these cute cars, boats, airplanes, heliocopters, all for less than 25 bucks. Yowsir! md On Tue, Jun 23, 2020 at 5:51 PM Richard Klein via WLUG <wlug(a)lists.wlug.org> wrote: > I just watched a webinar from these guys. Those of you with 3D printers > might want to check them out. > https://www.3daeroventures.com/ > > -- > Rich > _______________________________________________ > WLUG mailing list -- wlug(a)lists.wlug.org > To unsubscribe send an email to wlug-leave(a)lists.wlug.org > Create Account: https://wlug.mailman3.com/accounts/signup/ > Change Settings: > https://wlug.mailman3.com/postorius/lists/wlug.lists.wlug.org/ > Web Forum/Archive: > https://wlug.mailman3.com/hyperkitty/list/wlug@lists.wlug.org/message/RSWQI… >

June 23, 2020

Re: [EXT] 3D printing RC planes

by Krichevsky, Nicholas J.

I just bought an Ender 3 after a failed attempt over the past couple months of fixing up a printrbot... I might have to check this out once it gets here! Get Outlook for Android<https://aka.ms/ghei36> ________________________________ From: Richard Klein via WLUG <wlug(a)lists.wlug.org> Sent: Tuesday, June 23, 2020 5:50:51 PM To: Worcester Linux Users' Group General Discussion <wlug(a)lists.wlug.org> Cc: Richard Klein <rich(a)richardklein.org> Subject: [EXT] [WLUG] 3D printing RC planes I just watched a webinar from these guys. Those of you with 3D printers might want to check them out. https://www.3daeroventures.com/<https://nam03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.3daer…> -- Rich

June 23, 2020

3D printing RC planes

by Richard Klein

I just watched a webinar from these guys. Those of you with 3D printers might want to check them out. https://www.3daeroventures.com/ -- Rich

June 23, 2020

Re: Great meeting last night... but we need topics...

by John Stoffel

Dennis> Argh! I meant to join last night but forgot. Same here, work has slowly been taking up my evenings since they all Cali time... I'd like to maybe talk Ansible, and about my experience in slowly getting upto speed with it and learning how it can make my life simpler. And harder. And how much I hate all those silly simple examples which don't *do* anything. "Look how easy it is to install Apache and php using ansible!" type of stupid examples. Dennis> I've been working on a new project if people are Dennis> interested. It is called Gamerzilla. It is an Dennis> achievement/trophy system for open source games. Cool.

June 13, 2020