April 2009 - WLUG - wlug.mailman3.com

Re: [Wlug] Keyboard and mouse repeatedly disconnect/reconnect

by J. R. Mauro

On Apr 25, 2009, at 17:01, E Johnson <iris.gates(a)gmail.com> wrote: > Is it normal for USB to disconnct/reconnect repeatedly, many times per > minute? That sounds fishy, but possible > Is that still considered random and normal? That's what we > have here, in the three different computers that I have access to > today. Not a few times, but zillions of lines in /var/log/messages. > It's worst in the older PC. > > The mice mostly have been pretty standard Logitek versions, nothing > fancy or unusual. > > How can I find out if the lockup is caused by "X fighting over the > hardware", or by drivers? Kernel version, distro, output of lsmod? It looks like you use different event drivers in each setup, but if you know which uses which, that could help > > > Thanks, > Liz J > > 2009/4/25 J. R. Mauro <jrm8005(a)gmail.com>: > >> USB can randomly dis/reconnect and that is normal. The lockup issues >> could be related to other drivers and/or X fighting over the >> hardware. > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

April 25, 2009

Re: [Wlug] Keyboard and mouse repeatedly disconnect/reconnect

by E Johnson

Is it normal for USB to disconnct/reconnect repeatedly, many times per minute? Is that still considered random and normal? That's what we have here, in the three different computers that I have access to today. Not a few times, but zillions of lines in /var/log/messages. It's worst in the older PC. The mice mostly have been pretty standard Logitek versions, nothing fancy or unusual. How can I find out if the lockup is caused by "X fighting over the hardware", or by drivers? Thanks, Liz J 2009/4/25 J. R. Mauro <jrm8005(a)gmail.com>: > USB can randomly dis/reconnect and that is normal. The lockup issues > could be related to other drivers and/or X fighting over the hardware.

April 25, 2009

Re: [Wlug] Keyboard and mouse repeatedly disconnect/reconnect

by J. R. Mauro

USB can randomly dis/reconnect and that is normal. The lockup issues could be related to other drivers and/or X fighting over the hardware. On Apr 25, 2009, at 13:16, E Johnson <iris.gates(a)gmail.com> wrote: > Tonight I am being reminded several times per hour that something > weird is happening here. I have a mouse and keyboard USB disconnect > problem that has been hanging around for a couple of years now. > > Across the room where my old computer sits quietly running, the red > light in the mouse keeps flashing as it goes off then comes back on, > even though this computer is idle. So I checked /var/log/messages, and > sure enough, messages appear there that correspond with the times the > red light flashes. > > Messages like these crop up regularly and often in /var/log/messages > > Computer 1: > > Apr 24 02:47:40 geurig kernel: [1086766.208280] usb 5-1: New USB > device found, idVendor=046d, idProduct=c03e > Apr 24 02:47:40 geurig kernel: [1086766.208286] usb 5-1: New USB > device strings: Mfr=1, Product=2, SerialNumber=0 > Apr 24 02:47:40 geurig kernel: [1086766.208292] usb 5-1: Product: > USB-PS/2 Optical Mouse > Apr 24 02:47:40 geurig kernel: [1086766.208296] usb 5-1: > Manufacturer: Logitech > Apr 24 02:47:40 geurig kernel: [1086766.432055] __ratelimit: 1 > messages suppressed > Apr 24 02:48:13 geurig kernel: [1086799.620065] usb 5-1: USB > disconnect, address 109 > Apr 24 02:48:14 geurig kernel: [1086799.872028] usb 5-1: new low speed > USB device using uhci_hcd and address 110 > Apr 24 02:48:14 geurig kernel: [1086800.024007] usb 5-1: configuration > #1 chosen from 1 choice > Apr 24 02:48:14 geurig kernel: [1086800.065154] input: Logitech > USB-PS/2 Optical Mouse as /class/input/input112 > Apr 24 02:48:14 geurig kernel: [1086800.092124] input,hidraw0: USB HID > v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1 > > This PC is running Debian Lenny kernel 2.6.26-1-686. Same thing often > used to happen with the USB keyboard, too. Now I'm using a PS2 > keyboard in this PC, which does not result in these disconnect > messages, but still seeing these messages about the mouse. Sometimes > this happens over and over again many times within a short period of > time (several times/minute). > > There were lockup problems related to this problem when I was running > Etch, after this keyboard or mouse USB disconnect thing had > disconnected and reconnected some large number of times, I think it > was well over a hundred times. Keyboard and/or mouse would no longer > accept input, forcing me to have to ssh in and reboot it, or if I > couldn't do that, had to hard reboot. Restart X is not enough to fix > this. This has happened with various different mice and keyboards. > > So we installed a USB card, thinking this might be a hardware problem > with the USB ports, but no, the same problem crops up no matter if the > mouse or keyboard is plugged into the card, or into the USB ports in > the case. > > Then we thought it might be a problem in Etch, so we upgraded to > Lenny. But it still happens. Also happens in Ubuntu. > > The latest issue (see below) was a long string of these > disconnect/reconnects, then a lockup of the mouse and I believe > keyboard. Had to ssh in to stop the problem (by shutting down). This > new build is using my used hard drive, but I don't think that is > relevant. Below is only a small piece of var/log/messages, where the > problem seemed to change after several hours from the familiar mouse > disconnect/reconnect, to something else. These mmessages were repeated > many times (over a hundred): > > Apr 24 13:16:24 geurig kernel: [1124490.152288] usb 5-1: New USB > device found, idVendor=046d, idProduct=c03e > Apr 24 13:16:24 geurig kernel: [1124490.152294] usb 5-1: New USB > device strings: Mfr=1, Product=2, SerialNumber=0 > Apr 24 13:16:24 geurig kernel: [1124490.152300] usb 5-1: Product: > USB-PS/2 Optical Mouse > Apr 24 13:16:24 geurig kernel: [1124490.152304] usb 5-1: > Manufacturer: Logitech > Apr 24 13:17:24 geurig kernel: [1124550.713733] usb 5-1: USB > disconnect, address 53 > Apr 24 13:17:25 geurig kernel: [1124551.128022] usb 5-1: new low speed > USB device using uhci_hcd and address 54 > Apr 24 13:17:25 geurig kernel: [1124551.280008] usb 5-1: configuration > #1 chosen from 1 choice > Apr 24 13:17:25 geurig kernel: [1124551.324800] input: Logitech > USB-PS/2 Optical Mouse as /class/input/input812 > Apr 24 13:17:25 geurig kernel: [1124551.356089] input,hidraw0: USB HID > v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on > usb-0000:00:10.1-1 > Apr 24 13:17:25 geurig kernel: [1124551.356251] usb 5-1: New USB > device found, idVendor=046d, idProduct=c03e > Apr 24 13:17:25 geurig kernel: [1124551.356257] usb 5-1: New USB > device strings: Mfr=1, Product=2, SerialNumber=0 > Apr 24 13:17:25 geurig kernel: [1124551.356263] usb 5-1: Product: > USB-PS/2 Optical Mouse > Apr 24 13:17:25 geurig kernel: [1124551.356267] usb 5-1: > Manufacturer: Logitech > Apr 24 13:18:26 geurig kernel: [1124611.968623] usb 5-1: USB > disconnect, address 54 > Apr 24 13:18:26 geurig kernel: [1124612.468024] usb 5-1: new low speed > USB device using uhci_hcd and address 55 > Apr 24 13:18:58 geurig kernel: [1124644.288028] usb 5-1: new low speed > USB device using uhci_hcd and address 56 > Apr 24 13:19:30 geurig kernel: [1124676.032024] usb 5-1: new low speed > USB device using uhci_hcd and address 57 > Apr 24 13:19:40 geurig kernel: [1124686.684056] usb 5-1: new low speed > USB device using uhci_hcd and address 58 > Apr 24 13:19:54 geurig kernel: [1124700.008027] uhci_hcd 0000:00:10.1: > Controller not stopped yet! > Apr 24 13:20:21 geurig kernel: [1124727.772025] usb 5-1: new low speed > USB device using uhci_hcd and address 59 > Apr 24 13:20:53 geurig kernel: [1124759.608024] usb 5-1: new low speed > USB device using uhci_hcd and address 60 > Apr 24 13:21:25 geurig kernel: [1124791.352042] usb 5-1: new low speed > USB device using uhci_hcd and address 61 > Apr 24 13:21:36 geurig kernel: [1124802.006763] usb 5-1: new low speed > USB device using uhci_hcd and address 62 > Apr 24 13:21:46 geurig kernel: [1124812.767430] __ratelimit: 29 > messages suppressed > Apr 24 13:21:50 geurig kernel: [1124816.008030] uhci_hcd 0000:00:10.1: > Controller not stopped yet! > Apr 24 13:22:17 geurig kernel: [1124843.804029] usb 5-1: new low speed > USB device using uhci_hcd and address 63 > Apr 24 13:22:49 geurig kernel: [1124875.424045] usb 5-1: new low speed > USB device using uhci_hcd and address 64 > Apr 24 13:23:21 geurig kernel: [1124907.168043] usb 5-1: new low speed > USB device using uhci_hcd and address 65 > Apr 24 13:23:31 geurig kernel: [1124917.820026] usb 5-1: new low speed > USB device using uhci_hcd and address 66 > Apr 24 13:23:45 geurig kernel: [1124931.012844] uhci_hcd 0000:00:10.1: > Controller not stopped yet! > > This problem is not limited to this PC. Just built a brand new > computer, and it's happening in the new computer, too, running Debian > Lenny kernel 2.6.26-2-686 on a totally different motherboard. These > two sets of entries show both keyboard and mouse events: > > Computer 2. > Apr 19 23:14:31 lancer kernel: [261130.697577] usb 3-2: USB > disconnect, address 62 > Apr 19 23:14:32 lancer kernel: [261131.262914] usb 3-2: new low speed > USB device using ohci_hcd and address 64 > Apr 19 23:14:32 lancer kernel: [261131.453627] usb 3-2: configuration > #1 chosen from 1 choice > Apr 19 23:14:32 lancer kernel: [261131.465284] input: CHESEN USB > Keyboard as /class/input/input59 > Apr 19 23:14:32 lancer kernel: [261131.493292] input,hidraw1: USB HID > v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:13.0-2 > Apr 19 23:14:32 lancer kernel: [261131.501293] input: CHESEN USB > Keyboard as /class/input/input60 > Apr 19 23:14:32 lancer kernel: [261131.549291] input,hidraw2: USB HID > v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:13.0-2 > Apr 19 23:14:32 lancer kernel: [261131.549291] usb 3-2: New USB device > found, idVendor=0a81, idProduct=0101 > Apr 19 23:14:32 lancer kernel: [261131.549291] usb 3-2: New USB device > strings: Mfr=1, Product=2, SerialNumber=0 > Apr 19 23:14:32 lancer kernel: [261131.549291] usb 3-2: Product: USB > Keyboard > Apr 19 23:14:32 lancer kernel: [261131.549291] usb 3-2: > Manufacturer: CHESEN > Apr 19 23:25:27 lancer kernel: [261787.827069] usb 3-2: USB > disconnect, address 64 > Apr 19 23:25:28 lancer kernel: [261788.160461] usb 3-2: new low speed > USB device using ohci_hcd and address 65 > Apr 19 23:25:28 lancer kernel: [261788.344991] usb 3-2: configuration > #1 chosen from 1 choice > Apr 19 23:25:28 lancer kernel: [261788.356166] input: CHESEN USB > Keyboard as /class/input/input61 > Apr 19 23:25:28 lancer kernel: [261788.384180] input,hidraw1: USB HID > v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:13.0-2 > Apr 19 23:25:28 lancer kernel: [261788.392173] input: CHESEN USB > Keyboard as /class/input/input62 > Apr 19 23:25:28 lancer kernel: [261788.448169] input,hidraw2: USB HID > v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:13.0-2 > Apr 19 23:25:28 lancer kernel: [261788.448169] usb 3-2: New USB device > found, idVendor=0a81, idProduct=0101 > Apr 19 23:25:28 lancer kernel: [261788.448169] usb 3-2: New USB device > strings: Mfr=1, Product=2, SerialNumber=0 > Apr 19 23:25:28 lancer kernel: [261788.448169] usb 3-2: Product: USB > Keyboard > Apr 19 23:25:28 lancer kernel: [261788.448169] usb 3-2: > Manufacturer: CHESEN > -- and -- > Apr 23 09:34:28 lancer kernel: [58666.642632] usb 1-1: USB > disconnect, address 4 > Apr 23 09:34:30 lancer kernel: [58668.138801] usb 1-1: new low speed > USB device using ohci_hcd and address 7 > Apr 23 09:34:30 lancer kernel: [58668.327037] usb 1-1: configuration > #1 chosen from 1 choice > Apr 23 09:34:30 lancer kernel: [58668.335045] input: USB Optical Mouse > as /class/input/input6 > Apr 23 09:34:30 lancer kernel: [58668.355048] input,hidraw2: USB HID > v1.10 Mouse [USB Optical Mouse] on usb-0000:00:12.0-1 > Apr 23 09:34:30 lancer kernel: [58668.355048] usb 1-1: New USB device > found, idVendor=15ca, idProduct=00c3 > Apr 23 09:34:30 lancer kernel: [58668.355048] usb 1-1: New USB device > strings: Mfr=0, Product=2, SerialNumber=0 > Apr 23 09:34:30 lancer kernel: [58668.355048] usb 1-1: Product: USB > Optical Mouse > > Had same problem in this new PC, running a recent Ubuntu Hardy (8.04) > install. This PC is only a few weeks old, now with a fresh install of > Lenny in its own partition. Only the hard drive and the DVD drive are > not brand-new. > > I possibly (maybe?) solved the keyboard issue in this PC by specifying > the correct type of keyboard in Settings > Peripherals > Keboard (in > KDE). Not sure if it's really gone or not. But now getting hundreds of > messages about the mouse, as above. > > Computer 3. > It's also happening in my daughter's computer, that has the exact same > motherboard and almost the same CPU as computer 2. Hers is running > Ubuntu 8.04 2.6.24-23.52 (running Gnome), just updated last week. She > has never complained about any lockup problem, but she reboots more > often than I do. > > Apr 12 22:19:53 wanda kernel: [ 3543.266303] usb 1-2: USB > disconnect, address 3 > Apr 12 22:19:53 wanda kernel: [ 3543.348070] usb 1-2: new low speed > USB device using ohci_hcd and address 4 > Apr 12 22:19:53 wanda kernel: [ 3543.431718] usb 1-2: configuration #1 > chosen from 1 choice > Apr 12 22:19:53 wanda kernel: [ 3543.446738] input: Logitech USB-PS/2 > Optical Mouse as > /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input6 > Apr 12 22:19:53 wanda kernel: [ 3543.465380] input,hidraw0: USB HID > v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2 > Apr 12 22:22:09 wanda kernel: [ 3595.885419] usb 1-2: USB > disconnect, address 4 > Apr 12 22:22:10 wanda kernel: [ 3595.973146] usb 1-2: new low speed > USB device using ohci_hcd and address 5 > Apr 12 22:22:10 wanda kernel: [ 3596.056975] usb 1-2: configuration #1 > chosen from 1 choice > Apr 12 22:22:10 wanda kernel: [ 3596.059711] input: Logitech USB-PS/2 > Optical Mouse as > /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input7 > Apr 12 22:22:10 wanda kernel: [ 3596.079690] input,hidraw0: USB HID > v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2 > > Computer 4. > I believe this also happens in the laptop, a Dell Inspiron 1525n, > running (now) Ubuntu Hardy (this came with Ubuntu 7.10 > pre-uinstalled). Cannot post /var/log/messages from this today, since > this laptop is away with daughter. But the same messages appear in > that one, too. > > Has anyone run into this before, and if so, did you get it fixed? > > Thanks very much, > Liz J > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

April 25, 2009

Keyboard and mouse repeatedly disconnect/reconnect

by E Johnson

Tonight I am being reminded several times per hour that something weird is happening here. I have a mouse and keyboard USB disconnect problem that has been hanging around for a couple of years now. Across the room where my old computer sits quietly running, the red light in the mouse keeps flashing as it goes off then comes back on, even though this computer is idle. So I checked /var/log/messages, and sure enough, messages appear there that correspond with the times the red light flashes. Messages like these crop up regularly and often in /var/log/messages Computer 1: Apr 24 02:47:40 geurig kernel: [1086766.208280] usb 5-1: New USB device found, idVendor=046d, idProduct=c03e Apr 24 02:47:40 geurig kernel: [1086766.208286] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 24 02:47:40 geurig kernel: [1086766.208292] usb 5-1: Product: USB-PS/2 Optical Mouse Apr 24 02:47:40 geurig kernel: [1086766.208296] usb 5-1: Manufacturer: Logitech Apr 24 02:47:40 geurig kernel: [1086766.432055] __ratelimit: 1 messages suppressed Apr 24 02:48:13 geurig kernel: [1086799.620065] usb 5-1: USB disconnect, address 109 Apr 24 02:48:14 geurig kernel: [1086799.872028] usb 5-1: new low speed USB device using uhci_hcd and address 110 Apr 24 02:48:14 geurig kernel: [1086800.024007] usb 5-1: configuration #1 chosen from 1 choice Apr 24 02:48:14 geurig kernel: [1086800.065154] input: Logitech USB-PS/2 Optical Mouse as /class/input/input112 Apr 24 02:48:14 geurig kernel: [1086800.092124] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1 This PC is running Debian Lenny kernel 2.6.26-1-686. Same thing often used to happen with the USB keyboard, too. Now I'm using a PS2 keyboard in this PC, which does not result in these disconnect messages, but still seeing these messages about the mouse. Sometimes this happens over and over again many times within a short period of time (several times/minute). There were lockup problems related to this problem when I was running Etch, after this keyboard or mouse USB disconnect thing had disconnected and reconnected some large number of times, I think it was well over a hundred times. Keyboard and/or mouse would no longer accept input, forcing me to have to ssh in and reboot it, or if I couldn't do that, had to hard reboot. Restart X is not enough to fix this. This has happened with various different mice and keyboards. So we installed a USB card, thinking this might be a hardware problem with the USB ports, but no, the same problem crops up no matter if the mouse or keyboard is plugged into the card, or into the USB ports in the case. Then we thought it might be a problem in Etch, so we upgraded to Lenny. But it still happens. Also happens in Ubuntu. The latest issue (see below) was a long string of these disconnect/reconnects, then a lockup of the mouse and I believe keyboard. Had to ssh in to stop the problem (by shutting down). This new build is using my used hard drive, but I don't think that is relevant. Below is only a small piece of var/log/messages, where the problem seemed to change after several hours from the familiar mouse disconnect/reconnect, to something else. These mmessages were repeated many times (over a hundred): Apr 24 13:16:24 geurig kernel: [1124490.152288] usb 5-1: New USB device found, idVendor=046d, idProduct=c03e Apr 24 13:16:24 geurig kernel: [1124490.152294] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 24 13:16:24 geurig kernel: [1124490.152300] usb 5-1: Product: USB-PS/2 Optical Mouse Apr 24 13:16:24 geurig kernel: [1124490.152304] usb 5-1: Manufacturer: Logitech Apr 24 13:17:24 geurig kernel: [1124550.713733] usb 5-1: USB disconnect, address 53 Apr 24 13:17:25 geurig kernel: [1124551.128022] usb 5-1: new low speed USB device using uhci_hcd and address 54 Apr 24 13:17:25 geurig kernel: [1124551.280008] usb 5-1: configuration #1 chosen from 1 choice Apr 24 13:17:25 geurig kernel: [1124551.324800] input: Logitech USB-PS/2 Optical Mouse as /class/input/input812 Apr 24 13:17:25 geurig kernel: [1124551.356089] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1 Apr 24 13:17:25 geurig kernel: [1124551.356251] usb 5-1: New USB device found, idVendor=046d, idProduct=c03e Apr 24 13:17:25 geurig kernel: [1124551.356257] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 24 13:17:25 geurig kernel: [1124551.356263] usb 5-1: Product: USB-PS/2 Optical Mouse Apr 24 13:17:25 geurig kernel: [1124551.356267] usb 5-1: Manufacturer: Logitech Apr 24 13:18:26 geurig kernel: [1124611.968623] usb 5-1: USB disconnect, address 54 Apr 24 13:18:26 geurig kernel: [1124612.468024] usb 5-1: new low speed USB device using uhci_hcd and address 55 Apr 24 13:18:58 geurig kernel: [1124644.288028] usb 5-1: new low speed USB device using uhci_hcd and address 56 Apr 24 13:19:30 geurig kernel: [1124676.032024] usb 5-1: new low speed USB device using uhci_hcd and address 57 Apr 24 13:19:40 geurig kernel: [1124686.684056] usb 5-1: new low speed USB device using uhci_hcd and address 58 Apr 24 13:19:54 geurig kernel: [1124700.008027] uhci_hcd 0000:00:10.1: Controller not stopped yet! Apr 24 13:20:21 geurig kernel: [1124727.772025] usb 5-1: new low speed USB device using uhci_hcd and address 59 Apr 24 13:20:53 geurig kernel: [1124759.608024] usb 5-1: new low speed USB device using uhci_hcd and address 60 Apr 24 13:21:25 geurig kernel: [1124791.352042] usb 5-1: new low speed USB device using uhci_hcd and address 61 Apr 24 13:21:36 geurig kernel: [1124802.006763] usb 5-1: new low speed USB device using uhci_hcd and address 62 Apr 24 13:21:46 geurig kernel: [1124812.767430] __ratelimit: 29 messages suppressed Apr 24 13:21:50 geurig kernel: [1124816.008030] uhci_hcd 0000:00:10.1: Controller not stopped yet! Apr 24 13:22:17 geurig kernel: [1124843.804029] usb 5-1: new low speed USB device using uhci_hcd and address 63 Apr 24 13:22:49 geurig kernel: [1124875.424045] usb 5-1: new low speed USB device using uhci_hcd and address 64 Apr 24 13:23:21 geurig kernel: [1124907.168043] usb 5-1: new low speed USB device using uhci_hcd and address 65 Apr 24 13:23:31 geurig kernel: [1124917.820026] usb 5-1: new low speed USB device using uhci_hcd and address 66 Apr 24 13:23:45 geurig kernel: [1124931.012844] uhci_hcd 0000:00:10.1: Controller not stopped yet! This problem is not limited to this PC. Just built a brand new computer, and it's happening in the new computer, too, running Debian Lenny kernel 2.6.26-2-686 on a totally different motherboard. These two sets of entries show both keyboard and mouse events: Computer 2. Apr 19 23:14:31 lancer kernel: [261130.697577] usb 3-2: USB disconnect, address 62 Apr 19 23:14:32 lancer kernel: [261131.262914] usb 3-2: new low speed USB device using ohci_hcd and address 64 Apr 19 23:14:32 lancer kernel: [261131.453627] usb 3-2: configuration #1 chosen from 1 choice Apr 19 23:14:32 lancer kernel: [261131.465284] input: CHESEN USB Keyboard as /class/input/input59 Apr 19 23:14:32 lancer kernel: [261131.493292] input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:13.0-2 Apr 19 23:14:32 lancer kernel: [261131.501293] input: CHESEN USB Keyboard as /class/input/input60 Apr 19 23:14:32 lancer kernel: [261131.549291] input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:13.0-2 Apr 19 23:14:32 lancer kernel: [261131.549291] usb 3-2: New USB device found, idVendor=0a81, idProduct=0101 Apr 19 23:14:32 lancer kernel: [261131.549291] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 19 23:14:32 lancer kernel: [261131.549291] usb 3-2: Product: USB Keyboard Apr 19 23:14:32 lancer kernel: [261131.549291] usb 3-2: Manufacturer: CHESEN Apr 19 23:25:27 lancer kernel: [261787.827069] usb 3-2: USB disconnect, address 64 Apr 19 23:25:28 lancer kernel: [261788.160461] usb 3-2: new low speed USB device using ohci_hcd and address 65 Apr 19 23:25:28 lancer kernel: [261788.344991] usb 3-2: configuration #1 chosen from 1 choice Apr 19 23:25:28 lancer kernel: [261788.356166] input: CHESEN USB Keyboard as /class/input/input61 Apr 19 23:25:28 lancer kernel: [261788.384180] input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:13.0-2 Apr 19 23:25:28 lancer kernel: [261788.392173] input: CHESEN USB Keyboard as /class/input/input62 Apr 19 23:25:28 lancer kernel: [261788.448169] input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:13.0-2 Apr 19 23:25:28 lancer kernel: [261788.448169] usb 3-2: New USB device found, idVendor=0a81, idProduct=0101 Apr 19 23:25:28 lancer kernel: [261788.448169] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 19 23:25:28 lancer kernel: [261788.448169] usb 3-2: Product: USB Keyboard Apr 19 23:25:28 lancer kernel: [261788.448169] usb 3-2: Manufacturer: CHESEN -- and -- Apr 23 09:34:28 lancer kernel: [58666.642632] usb 1-1: USB disconnect, address 4 Apr 23 09:34:30 lancer kernel: [58668.138801] usb 1-1: new low speed USB device using ohci_hcd and address 7 Apr 23 09:34:30 lancer kernel: [58668.327037] usb 1-1: configuration #1 chosen from 1 choice Apr 23 09:34:30 lancer kernel: [58668.335045] input: USB Optical Mouse as /class/input/input6 Apr 23 09:34:30 lancer kernel: [58668.355048] input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:12.0-1 Apr 23 09:34:30 lancer kernel: [58668.355048] usb 1-1: New USB device found, idVendor=15ca, idProduct=00c3 Apr 23 09:34:30 lancer kernel: [58668.355048] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 Apr 23 09:34:30 lancer kernel: [58668.355048] usb 1-1: Product: USB Optical Mouse Had same problem in this new PC, running a recent Ubuntu Hardy (8.04) install. This PC is only a few weeks old, now with a fresh install of Lenny in its own partition. Only the hard drive and the DVD drive are not brand-new. I possibly (maybe?) solved the keyboard issue in this PC by specifying the correct type of keyboard in Settings > Peripherals > Keboard (in KDE). Not sure if it's really gone or not. But now getting hundreds of messages about the mouse, as above. Computer 3. It's also happening in my daughter's computer, that has the exact same motherboard and almost the same CPU as computer 2. Hers is running Ubuntu 8.04 2.6.24-23.52 (running Gnome), just updated last week. She has never complained about any lockup problem, but she reboots more often than I do. Apr 12 22:19:53 wanda kernel: [ 3543.266303] usb 1-2: USB disconnect, address 3 Apr 12 22:19:53 wanda kernel: [ 3543.348070] usb 1-2: new low speed USB device using ohci_hcd and address 4 Apr 12 22:19:53 wanda kernel: [ 3543.431718] usb 1-2: configuration #1 chosen from 1 choice Apr 12 22:19:53 wanda kernel: [ 3543.446738] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input6 Apr 12 22:19:53 wanda kernel: [ 3543.465380] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2 Apr 12 22:22:09 wanda kernel: [ 3595.885419] usb 1-2: USB disconnect, address 4 Apr 12 22:22:10 wanda kernel: [ 3595.973146] usb 1-2: new low speed USB device using ohci_hcd and address 5 Apr 12 22:22:10 wanda kernel: [ 3596.056975] usb 1-2: configuration #1 chosen from 1 choice Apr 12 22:22:10 wanda kernel: [ 3596.059711] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input7 Apr 12 22:22:10 wanda kernel: [ 3596.079690] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2 Computer 4. I believe this also happens in the laptop, a Dell Inspiron 1525n, running (now) Ubuntu Hardy (this came with Ubuntu 7.10 pre-uinstalled). Cannot post /var/log/messages from this today, since this laptop is away with daughter. But the same messages appear in that one, too. Has anyone run into this before, and if so, did you get it fixed? Thanks very much, Liz J

April 25, 2009

Good disaster recovery / business continuity planning books

by Eric Martin

I'm currently updating all of the documentation at work and I'm looking for some resources specifically for Disaster Recovery plans and Business Continuity Plans. I've looked at the SANS reading room for some stuff, but I'm still looking for more. Does anybody have any good recommendations for books? Thanks in advance! -- Eric

April 23, 2009

Re: [Wlug] Pre-Registration ended at 4:30pm: WLUG Keysigning, Wenesday April 22nd

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Chuck Anderson wrote: > On Wed, Apr 22, 2009 at 05:46:56PM -0400, Andy Stewart wrote: >> I'd like to understand why my email message to wlug-keys didn't make it >> when I sent it a few days ago. Did anybody else run into this, or is >> this a case of PEBKAC? > > Does the /bin/mail on the system where you ran the "gpg" command do > the right thing with email sent from there? If it isn't configured > correctly for remote mail delivery (e.g. smart relay host in > /etc/mail/sendmail.cf) then you might try copy/paste of the command's > output to your regular email client program. > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > Hi all, The problem was indeed on my side. I never use the "mail" command at the prompt, thus, it was not configured to send email. I saw two bounced emails once I got home from the WLUG meeting. Thanks, Chuck, for offering some ideas to help debug this problem. I hope everybody enjoyed the meeting this evening. Many thanks once again to Chuck and Eric for running this meeting! Don't forget, next month, we will have a speaker addressing us about the Open Street Map project. Later, Andy - -- Andy Stewart, Founder Worcester Linux Users' Group (http://www.wlug.org) Chelmsford Linux Meetup Group (http://linux.meetup.com/393) Amateur Radio: KB1OIQ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFJ7+DQHl0iXDssISsRAjplAJwM121uy9NSYnZTXsSZBuw82sy7YgCeMmpH yCNzhr675vam/Gu83qEDMTg= =372H -----END PGP SIGNATURE-----

April 23, 2009

Git talk from Eons ago

by J.R. Mauro

Hello folks, No, I haven't forgotten about WLUG. I had a great time being involved, and finally remembered to ping the mailing list. Attached find the slides of the talk I gave 6 months back or so on Distributed Version Control and Git. Thanks, J.R.

April 22, 2009

Re: [Wlug] Pre-Registration ended at 4:30pm: WLUG Keysigning, Wenesday April 22nd

by Chuck Anderson

On Wed, Apr 22, 2009 at 05:46:56PM -0400, Andy Stewart wrote: > I'd like to understand why my email message to wlug-keys didn't make it > when I sent it a few days ago. Did anybody else run into this, or is > this a case of PEBKAC? Does the /bin/mail on the system where you ran the "gpg" command do the right thing with email sent from there? If it isn't configured correctly for remote mail delivery (e.g. smart relay host in /etc/mail/sendmail.cf) then you might try copy/paste of the command's output to your regular email client program.

April 22, 2009

Re: [Wlug] Pre-Registration ended at 4:30pm: WLUG Keysigning, Wenesday April 22nd

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Chuck Anderson wrote: > If you didn't get an email directly from me to you (i.e. not via the > wlug email list), then you have missed pre-registration deadline. I > generated the final list of keys at about 4:30pm today. > > Even so, you can certainly still participate--you'll just need to > print your key's fingerprint 10-20 times for distribution to others, > as it says here under "Right Before the WLUG meeting": > > http://www.wlug.org/keysigning/ > > We usually end the meeting by 8:30-9pm, depending on how long things > take. > > On Wed, Apr 22, 2009 at 04:39:11PM -0400, Aaron Haviland wrote: >> I work until 8pm, about 20 minutes away. How late will this be >> running if I wanted to stop by? Is pre-registration required, or >> just optional? Would it be okay to show up late? > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > HI Chuck, I'd like to understand why my email message to wlug-keys didn't make it when I sent it a few days ago. Did anybody else run into this, or is this a case of PEBKAC? Thanks, Andy - -- Andy Stewart, Founder Worcester Linux Users' Group (http://www.wlug.org) Chelmsford Linux Meetup Group (http://linux.meetup.com/393) Amateur Radio: KB1OIQ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFJ75BQHl0iXDssISsRAkX3AKCBlEwrmfOiUD/79prcP207ovxCtwCeKBFO QLRb98E8UhEwD7aPKUq/Sn0= =eByC -----END PGP SIGNATURE-----

April 22, 2009

Re: [Wlug] Pre-Registration: WLUG Keysigning, Wenesday April 22nd

by Andy Stewart

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Chuck Anderson wrote: > Last call on Pre-Registration. At 3:30pm I'll generate the final list > of pre-registered fingerprints. > > On Thu, Apr 16, 2009 at 11:59:39PM -0400, Chuck Anderson wrote: >> I've put together a web page describing the procedure for >> Pre-Registering for the Keysigning to be held at our next WLUG >> meeting. This is also linked from the WLUG front page: >> >> http://www.wlug.org/keysigning/ >> >> If you wish to participate, please check it over as there are a few >> steps you need to perform before arriving at the meeting. >> >> Thanks, >> Chuck > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > HI guys, I was expecting to see my name in the wlug-keysigning-fingerprints.txt since I had (I thought) followed the instructions several days ago. Alas, my name/info is not present in the file. :-( I'll follow the rest of the instructions, and I'll see you at the meeting. Andy - -- Andy Stewart, Founder Worcester Linux Users' Group (http://www.wlug.org) Chelmsford Linux Meetup Group (http://linux.meetup.com/393) Amateur Radio: KB1OIQ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org iD8DBQFJ745AHl0iXDssISsRAkDvAJ4zvOwLPxPk+xKbFWfNHVKR+LNSUQCcDkym luJjbo5xsgLXb7RXo5Nudc0= =FCfe -----END PGP SIGNATURE-----

April 22, 2009