May 2003 - WLUG - wlug.mailman3.com

Re: [Wlug] Last modified time

by Michael Long

> Yes, it's easy to change the time. The "utime" function is standard > and does the trick. There's a perl binding, too > > . > Bill > Thanks for the reply. -mike

May 24, 2003

Re: [Wlug] writer problem

by Stéphane Purnelle

Le sam 24/05/2003 à 15:14, Gregory Avedissian a écrit : > Woops. Sorry, I didn't see this message before. > > First, let me admit that I don't understand most of what is here, but > I'll try. > > It says that some drives don't like fixation in dummy mode, so have you > tried burning for real without dummy mode? And why does it list the > average write speed as 191.3x? I don't know why the speed is 191.3x, but I use the dummy mode because, I don't would like to burn CD will become BAD. The problem is the scsi message : cdrecord: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 05 16 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.033s timeout 200s Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 write track data: error after 2666496 bytes Writing time: 23.177s Ps : Excuse for my bad english > > Greg > > > Stéphane Purnelle wrote: > > I forgot the attached file. > > And the writer model is 48125S not 18125S. > > > > > > ------------------------------------------------------------------------ > > > > Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=2048k driveropts=burnfree,noforcespeed -v -useinfo speed=12 -dao -dummy -eject -pad -data "/rsrv/var/images/download1-01.img" ... > > > > scsidev: '0,0,0' > > scsibus: 0 target: 0 lun: 0 > > Linux sg driver version: 3.1.24 > > pregap1: -1 > > Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling > > TOC Type: 1 = CD-ROM > > Using libscg version 'schily-0.7' > > Driveropts: 'burnfree,noforcespeed' > > atapi: 1 > > Device type : Removable CD-ROM > > Version : 0 > > Response Format: 2 > > Capabilities : > > Vendor_info : 'LITE-ON ' > > Identifikation : 'LTR-48125S ' > > Revision : '1S05' > > Device seems to be: Generic mmc CD-RW. > > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > > Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED > > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > > Drive buf size : 1422080 = 1388 KB > > FIFO size : 2097152 = 2048 KB > > Track 01: data 648 MB padsize: 30 KB > > Total size: 745 MB (73:49.85) = 332239 sectors > > Lout start: 745 MB (73:51/64) = 332239 sectors > > Current Secsize: 2048 > > ATIP info from disk: > > Indicated writing power: 5 > > Is not unrestricted > > Is not erasable > > Disk sub type: Medium Type B, low Beta category (B-) (4) > > ATIP start of lead in: -11933 (97:22/67) > > ATIP start of lead out: 359849 (79:59/74) > > Disk type: Short strategy type (Phthalocyanine or similar) > > Manuf. index: 43 > > Manufacturer: Acer Media Technology, Inc. > > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 27610 > > Forcespeed is OFF. > > Starting to write CD/DVD at speed 12 in dummy SAO mode for single session. > > Waiting for reader process to fill input buffer ... > > input buffer ready. > > BURN-Free is ON. > > Sending CUE sheet... > > Writing pregap for track 1 at -150 > > Starting new track at sector: 0 > > cdrecord: Input/output error. write_g1: scsi sendcmd: no error > > CDB: 2A 00 00 00 05 16 00 00 1F 00 > > status: 0x2 (CHECK CONDITION) > > Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 > > Sense Key: 0x4 Hardware Error, Segment 0 > > Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 > > Sense flags: Blk 0 (not valid) > > cmd finished after 0.033s timeout 200s > > > > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 > > write track data: error after 2666496 bytes > > Writing time: 23.177s > > Average write speed 191.3x. > > Min drive buffer fill was 99% > > Fixating... > > WARNING: Some drives don't like fixation in dummy mode. > > Fixating time: 0.703s > > BURN-Free was never needed. > > cdrecord: fifo had 74 puts and 43 gets. > > cdrecord: fifo was 0 times empty and 33 times full, min fill was 75%. > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

May 24, 2003

Re: [Wlug] writer problem

by Gregory Avedissian

Woops. Sorry, I didn't see this message before. First, let me admit that I don't understand most of what is here, but I'll try. It says that some drives don't like fixation in dummy mode, so have you tried burning for real without dummy mode? And why does it list the average write speed as 191.3x? Greg Stéphane Purnelle wrote: > I forgot the attached file. > And the writer model is 48125S not 18125S. > > > ------------------------------------------------------------------------ > > Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=2048k driveropts=burnfree,noforcespeed -v -useinfo speed=12 -dao -dummy -eject -pad -data "/rsrv/var/images/download1-01.img" ... > > scsidev: '0,0,0' > scsibus: 0 target: 0 lun: 0 > Linux sg driver version: 3.1.24 > pregap1: -1 > Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling > TOC Type: 1 = CD-ROM > Using libscg version 'schily-0.7' > Driveropts: 'burnfree,noforcespeed' > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : 'LITE-ON ' > Identifikation : 'LTR-48125S ' > Revision : '1S05' > Device seems to be: Generic mmc CD-RW. > Using generic SCSI-3/mmc CD-R driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > Drive buf size : 1422080 = 1388 KB > FIFO size : 2097152 = 2048 KB > Track 01: data 648 MB padsize: 30 KB > Total size: 745 MB (73:49.85) = 332239 sectors > Lout start: 745 MB (73:51/64) = 332239 sectors > Current Secsize: 2048 > ATIP info from disk: > Indicated writing power: 5 > Is not unrestricted > Is not erasable > Disk sub type: Medium Type B, low Beta category (B-) (4) > ATIP start of lead in: -11933 (97:22/67) > ATIP start of lead out: 359849 (79:59/74) > Disk type: Short strategy type (Phthalocyanine or similar) > Manuf. index: 43 > Manufacturer: Acer Media Technology, Inc. > Blocks total: 359849 Blocks current: 359849 Blocks remaining: 27610 > Forcespeed is OFF. > Starting to write CD/DVD at speed 12 in dummy SAO mode for single session. > Waiting for reader process to fill input buffer ... > input buffer ready. > BURN-Free is ON. > Sending CUE sheet... > Writing pregap for track 1 at -150 > Starting new track at sector: 0 > cdrecord: Input/output error. write_g1: scsi sendcmd: no error > CDB: 2A 00 00 00 05 16 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 > Sense Key: 0x4 Hardware Error, Segment 0 > Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.033s timeout 200s > > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 > write track data: error after 2666496 bytes > Writing time: 23.177s > Average write speed 191.3x. > Min drive buffer fill was 99% > Fixating... > WARNING: Some drives don't like fixation in dummy mode. > Fixating time: 0.703s > BURN-Free was never needed. > cdrecord: fifo had 74 puts and 43 gets. > cdrecord: fifo was 0 times empty and 33 times full, min fill was 75%.

May 24, 2003

Re: [Wlug] cd-writer problem

by Gregory Avedissian

I still don't see any attachments. I think you have to send it as inline text. Greg Stéphane Purnelle wrote: > Le sam 24/05/2003 à 06:46, Gregory Avedissian a écrit : > >>Where's your output file? Maybe attachments don't work on this list. >> >>Did you identify the drive as scsi at boot up and load module ide-scsi? >> >>What's the output of cdrecord -scanbus look like? >> > > > The attachements is in my second e-mail with the subject writer-problem. > > Here : the output of cdrecord -scanbus > > Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling > Linux sg driver version: 3.1.24 > Using libscg version 'schily-0.7' > scsibus0: > 0,0,0 0) 'LITE-ON ' 'LTR-48125S ' '1S05' Removable > CD-ROM > 0,1,0 1) * > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) * > 0,7,0 7) * > > > > > >>Greg >> >> >>Stéphane Purnelle wrote: >> >>>Hi >>> >>>I have a problem with my cd-writer. >>>On windows, I have no problem (dommage). >>>But with my redhat 8.0 kernel 2.4.18-24.8.0. I cannot burn a CD. >>>maybe it's a bad version of kernel ? >>> >>>writer : liteon 18125s 48x12x48 with burn proof >>>(http://www.liteonit.com) >>> >>> >>>You can read the output of x-cd-roast in the attached file. >>> >>>than you for your futur anwser >>> >>> >>>_______________________________________________ >>>Wlug mailing list >>>Wlug(a)mail.wlug.org >>>http://mail.wlug.org/mailman/listinfo/wlug >>> >>>

May 24, 2003

Re: [Wlug] cd-writer problem

by Stéphane Purnelle

Le sam 24/05/2003 à 06:46, Gregory Avedissian a écrit : > Where's your output file? Maybe attachments don't work on this list. > > Did you identify the drive as scsi at boot up and load module ide-scsi? > > What's the output of cdrecord -scanbus look like? > The attachements is in my second e-mail with the subject writer-problem. Here : the output of cdrecord -scanbus Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling Linux sg driver version: 3.1.24 Using libscg version 'schily-0.7' scsibus0: 0,0,0 0) 'LITE-ON ' 'LTR-48125S ' '1S05' Removable CD-ROM 0,1,0 1) * 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * > > Greg > > > Stéphane Purnelle wrote: > > Hi > > > > I have a problem with my cd-writer. > > On windows, I have no problem (dommage). > > But with my redhat 8.0 kernel 2.4.18-24.8.0. I cannot burn a CD. > > maybe it's a bad version of kernel ? > > > > writer : liteon 18125s 48x12x48 with burn proof > > (http://www.liteonit.com) > > > > > > You can read the output of x-cd-roast in the attached file. > > > > than you for your futur anwser > > > > > > _______________________________________________ > > Wlug mailing list > > Wlug(a)mail.wlug.org > > http://mail.wlug.org/mailman/listinfo/wlug > > > > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

May 24, 2003

Re: [Wlug] Last modified time

by Bill Mills-Curran

On 23 May 2003, Michael Long wrote: ML> Date: 23 May 2003 23:31:14 -0400 ML> From: Michael Long <mlong(a)datalong.com> ML> Reply-To: wlug(a)mail.wlug.org ML> To: WLUG <wlug(a)mail.wlug.org> ML> Subject: [Wlug] Last modified time ML> ML> How reliable is the ls -l listing. In other words is it possible to ML> modify a file and leave false timestamp on it. ML> ML> Thanks, ML> -- ML> Michael Long <mlong(a)datalong.com> ML> ML> ML> _______________________________________________ ML> Wlug mailing list ML> Wlug(a)mail.wlug.org ML> http://mail.wlug.org/mailman/listinfo/wlug ML> Michael, Yes, it's easy to change the time. The "utime" function is standard and does the trick. There's a perl binding, too. Bill

May 24, 2003

Re: [Wlug] cd-writer problem

by Gregory Avedissian

Where's your output file? Maybe attachments don't work on this list. Did you identify the drive as scsi at boot up and load module ide-scsi? What's the output of cdrecord -scanbus look like? Greg Stéphane Purnelle wrote: > Hi > > I have a problem with my cd-writer. > On windows, I have no problem (dommage). > But with my redhat 8.0 kernel 2.4.18-24.8.0. I cannot burn a CD. > maybe it's a bad version of kernel ? > > writer : liteon 18125s 48x12x48 with burn proof > (http://www.liteonit.com) > > > You can read the output of x-cd-roast in the attached file. > > than you for your futur anwser > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > >

May 24, 2003

Last modified time

by Michael Long

How reliable is the ls -l listing. In other words is it possible to modify a file and leave false timestamp on it. Thanks, -- Michael Long <mlong(a)datalong.com>

May 24, 2003

Interesting reading

by Andy Stewart

http://www.opensource.org/sco-vs-ibm.html -- Andy Stewart, Founder Worcester Linux Users' Group Worcester, MA USA http://www.wlug.org

May 20, 2003

Re: [Wlug] http load generators

by Doug Chamberlin

At 5/9/2003 01:32 PM (Friday), twg3(a)attbi.com wrote: >Does anyone have any recommendations of open source tools for generating very >high volume http traffic simulating large numbers of clients form multiple IP >addresses? I did a search on sourceforge and most of the projects have not >released any new code in 18 months or more - so not sure of status on most of >them. > >I need to test an application that uses HTTP as its transport layer (but not >HTML) so open source tools would allow the customizations I need, with out >haveing to write everything from scratch. This looks promising. Free Java-based tool with book to explain how to best use it: >From: Frank Cohen <fcohen(a)pushtotest.com> >Subject: New book: Automating Web Tests with TestMaker >X-BeenThere: newsletter(a)lists.pushtotest.com >X-Mailman-Version: 2.1.2 >Precedence: list >List-Id: PushToTest Newsletter Mailing List <newsletter.lists.pushtotest.com> >List-Unsubscribe: <http://lists.pushtotest.com/mailman/listinfo/newsletter>, > <mailto:newsletter-request@lists.pushtotest.com?subject=unsubscribe> >List-Archive: <http://fries.pushtotest.com/pipermail/newsletter> >List-Post: <mailto:newsletter@lists.pushtotest.com> >List-Help: <mailto:newsletter-request@lists.pushtotest.com?subject=help> >List-Subscribe: <http://lists.pushtotest.com/mailman/listinfo/newsletter>, > <mailto:newsletter-request@lists.pushtotest.com?subject=subscribe> > >May, 2003 > >From: Frank Cohen, founder of PushToTest > >I am very happy to announce the immediate availability of my new book: > >"Automating Web Tests with TestMaker" > >Details are at http://www.pushtotest.com/ptt, click on the book icon for a >special discount right now!

May 20, 2003