January 2003 - WLUG - wlug.mailman3.com

My qmail server could send the email but it could not receive the email.

by Aramico

Well, I've got a problem here..... Can somebody help me.... I've just built a new qmailserver, I can send email using my email address, but I could not receive any mail that sent to my address. In fact, I think i dont have problem with pop3 setting. Everytime I check my mail in my new qmail server, it is always say "NO NEW MESSAGES", it looks like it doesnt have a problem. but, ever person that tried to send me an email to my address that defined in my new qmail server, the sender got replied from my server (MAILER_DAEMON). The message that the sender got after they sent me an email look like this bellow : -------------------------------------------------------------------------- Hi. This is the qmail-send program at petrolumbrunei.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <aramico(a)petroleumbrunei.com>: Sorry. Although I'm listed as a best-preference MX or A for that host, it isn't in my control/locals file, so I don't treat it as local. (#5.4.6) --- Below this line is a copy of the message. Return-Path: <aramico(a)duahati.com> Received: (qmail 3532 invoked from network); 15 Jan 2003 20:33:11 -0000 Received: from smtp3.cbn.net.id (202.158.3.28) by petrolumbrunei.com with SMTP; 15 Jan 2003 20:33:11 -0000 Received: from nomad (ip88-59.cbn.net.id [202.158.88.59]) by smtp3.cbn.net.id (Postfix) with SMTP id 96D8542E6B for <aramico(a)petroleumbrunei.com>; Thu, 16 Jan 2003 01:34:40 +0700 (WIT) Message-ID: <006101c2bcc4$b0d18c10$3d18a8c0@nomad> From: "Aramico" <aramico(a)duahati.com> To: "Aramico" <aramico(a)petroleumbrunei.com> Subject: Test! Date: Thu, 16 Jan 2003 01:34:07 +0700 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_005E_01C2BCFF.5CA9CEF0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 This is a multi-part message in MIME format. ------=_NextPart_000_005E_01C2BCFF.5CA9CEF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Test! - Sent from aramico(a)duahati.com to aramico(a)petroleumbrunei.com . ------=_NextPart_000_005E_01C2BCFF.5CA9CEF0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Diso-8859-1"> <META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>Test! - Sent from <A=20 href=3D"mailto:aramico@duahati.com">aramico(a)duahati.com</A> to <A=20 href=3D"mailto:aramico@petroleumbrunei.com">aramico(a)petroleumbrunei.com</= A>=20 .</FONT></DIV></BODY></HTML> ------=_NextPart_000_005E_01C2BCFF.5CA9CEF0-- ---------------------------------------------------------------------------- ---------------- So, can you please tell me what was wrong here, what must I do ? Thanks. Note : Well, Andy..... How can I get this problem solved ? Any Idea ?

Jan. 15, 2003

RE: [Wlug] SCSI question.

by Mike

I havent looked for a couple of weeks now but Ubid http://www.ubid.com had 36GB 10K ultra 160 drives for just over $100 and the 18GB for just under $100 I believe. They are an auction site and recently not as good as they once where but from time to time there are some good buys there. ~ Michael LaPointe ~ HorizonNet Communications ~ http://www.allLongdistance.com > -----Original Message----- > From: wlug-admin(a)mail.wlug.org [mailto:wlug-admin@mail.wlug.org]On > Behalf Of John Stoffel > Sent: Tuesday, January 14, 2003 11:40 AM > To: wlug(a)mail.wlug.org > Subject: Re: [Wlug] SCSI question. > > > > Karl> Thanks all that answered. I just spent my $100 on a 10,000rpm > Karl> 18G drive. > > You got a SCSI drive for that price? Wow... > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Jan. 14, 2003

Re: [Wlug] SCSI question.

by John Stoffel

Karl> Thanks all that answered. I just spent my $100 on a 10,000rpm Karl> 18G drive. You got a SCSI drive for that price? Wow...

Jan. 14, 2003

Re: [Wlug] SCSI question.

by Karl Hiramoto

Yeah it says 160 bad blocks :-( And it's about 6 months past the end of the 3 year warranty :-( It still amazes me how well the warranty timing circuity works... ;-) Thanks all that answered. I just spent my $100 on a 10,000rpm 18G drive. On Mon, 13 Jan 2003, Bill Mills-Curran wrote: > On Mon, 13 Jan 2003, Karl Hiramoto wrote: > > <snip> > > One of my out of warranty drives died. (bad sectors) > > > <snip> > > Would "e2fsck -c <partition>" help to save your current drive? > > Bill > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Freedom: http://www.technojihad.com/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø The relative importance of files depends on their cost in terms of the human effort needed to regenerate them. -- T.A. Dolotta

Jan. 14, 2003

Re: [Wlug] SCSI question.

by Bill Mills-Curran

On Mon, 13 Jan 2003, Karl Hiramoto wrote: <snip> > One of my out of warranty drives died. (bad sectors) > <snip> Would "e2fsck -c <partition>" help to save your current drive? Bill

Jan. 13, 2003

Re: [Wlug] SCSI question.

by Clint Moyer

It won't run at U160 speeds with that adapter, but it will work. On Mon, 13 Jan 2003 17:22:52 -0500 (EST) Karl Hiramoto <karl(a)zoop.org> wrote: > >I know there are some SCSI guru's on this list. > >One of my out of warranty drives died. (bad sectors) > >I'm replacing it. The old drive was SCSI-2 Wide(80pin). > The SCSI >interface listed in /proc/pci is: >SCSI storage controller: Adaptec AHA-2940U/UW/D / >AIC-7881U (rev 1). > >Will a Ultra160 80pin drive work? I'm pretty sure it >does, just >looking for verification. Anyone know for sure? > > >Thanks > >-- > >¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø >Karl Hiramoto <karl(a)hiramoto.org> >Work: 978-425-2090 ext 25 >Cell: 508-517-4819 >Personal web page: http://karl.hiramoto.org/ >Freedom: http://www.technojihad.com/ >Zoop Productions: http://www.zoop.org/ >KTEQ Rapid City: http://www.kteq.org/ >AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto >¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > > >_______________________________________________ >Wlug mailing list >Wlug(a)mail.wlug.org >http://mail.wlug.org/mailman/listinfo/wlug > <TEXTAREA NAME="Signature" ROWS="4" COLS="60">

Jan. 13, 2003

Re: [Wlug] SCSI question.

by Matthew Schnee

Yes, the drive will work. Matthew Schnee Karl Hiramoto wrote: > > I know there are some SCSI guru's on this list. > > One of my out of warranty drives died. (bad sectors) > > I'm replacing it. The old drive was SCSI-2 Wide(80pin). The SCSI > interface listed in /proc/pci is: > SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 1). > > Will a Ultra160 80pin drive work? I'm pretty sure it does, just > looking for verification. Anyone know for sure? > > Thanks > > -- > > ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > Karl Hiramoto <karl(a)hiramoto.org> > Work: 978-425-2090 ext 25 > Cell: 508-517-4819 > Personal web page: http://karl.hiramoto.org/ > Freedom: http://www.technojihad.com/ > Zoop Productions: http://www.zoop.org/ > KTEQ Rapid City: http://www.kteq.org/ > AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto > ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

Jan. 13, 2003

SCSI question.

by Karl Hiramoto

I know there are some SCSI guru's on this list. One of my out of warranty drives died. (bad sectors) I'm replacing it. The old drive was SCSI-2 Wide(80pin). The SCSI interface listed in /proc/pci is: SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U (rev 1). Will a Ultra160 80pin drive work? I'm pretty sure it does, just looking for verification. Anyone know for sure? Thanks -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Freedom: http://www.technojihad.com/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø

Jan. 13, 2003

Re: [Wlug] I could not read from my my qmail server.

by Karl Hiramoto

I'd say you need to first find the cause of the "MAILER_DAEMON FAILURE NOTICE" maybee attach one of the messages and send it to the list. It usually says in the message why it failed. Then just correct the problem. Also look at the qmail logs, they might indicate what is going on. The logs might be in /var/log/ or /var/log/messages You gave very few details. On Mon, 13 Jan 2003, Aramico wrote: > Hi all, > Can you please help me.... > > I've got a problem with qmail, > > I've built my qmail server, > Here, I can send an email using my email address, cleary listed on the > recepient name that the sender's address is listed. > But, these following things happen : > > 1. I can connect to my server, the connection and autorization are workin' > nice, It alwais say "NO NEW MESSAGES" > 2. When I'm tryin' to send an email address to the one of the email address > that defined on my mail server, it always MAILER_DAEMON replied with the > subject is "FAILURE NOTICE" > > So, can somebody tell me what has happened here... ? What Shoul I Do ? > > Thanks All, > Bye there and have a nice day! > > > Note : I'm using qmail with pop3. > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Freedom: http://www.technojihad.com/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 Yahoo_IM = karl_hiramoto ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø The future not being born, my friend, we will abstain from baptizing it. -- George Meredith

Jan. 13, 2003

I could not read from my my qmail server.

by Aramico

Hi all, Can you please help me.... I've got a problem with qmail, I've built my qmail server, Here, I can send an email using my email address, cleary listed on the recepient name that the sender's address is listed. But, these following things happen : 1. I can connect to my server, the connection and autorization are workin' nice, It alwais say "NO NEW MESSAGES" 2. When I'm tryin' to send an email address to the one of the email address that defined on my mail server, it always MAILER_DAEMON replied with the subject is "FAILURE NOTICE" So, can somebody tell me what has happened here... ? What Shoul I Do ? Thanks All, Bye there and have a nice day! Note : I'm using qmail with pop3.

Jan. 13, 2003