June 2002 - WLUG - wlug.mailman3.com

Re: [Wlug] dual mother suggestons

by David Goss

http://www.intel.com/products/browse/motherbd.htm?iid=Homepage+Find_Products _Motherboards& I work with the STL2 & SCB2 boards. We manufacture for some drug companies and have thousands of these boards in the field. My experience with them is only as far as installing the O/S of which 90% is Wndoze ( NT 4.). The boards I have installed Linux ( Red Hat 7.0-3 ) have been nice to work with. Intel support is good as well. Not trying to plug them but you do get what you pay for and these boards have proven reliable albeit expensive. Hope that helps. Dave Goss Assimilation is futile. ----- Original Message ----- From: <bryon3245(a)netzero.com> To: <wlug(a)mail.wlug.org> Sent: Monday, June 03, 2002 7:33 PM Subject: [Wlug] dual mother suggestons > Dear WLUG Mailing list readers, > > I would appreciate it if you could help me by suggesting a good quality dual Intel p4 (fastest possible) motherboard. > > Thanks, > Bryon > > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://mail2web.com/ . > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug

June 4, 2002

dual mother suggestons

by bryon3245＠netzero.com

Dear WLUG Mailing list readers, I would appreciate it if you could help me by suggesting a good quality dual Intel p4 (fastest possible) motherboard. Thanks, Bryon -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ .

June 3, 2002

FORSALE: DEC 3000 model 900 (fwd)

by Phillip G Deneault

When I said 'OBO'....I meant it.. :-) Its 100 bucks OBO now... :-) Phil -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Phil Deneault "We work in the dark, We do what we can, deneault(a)wpi.edu We give what we have. Our doubt is our passion, WPI NetOps and our passion is our task. The rest is the OpenVMS Guy maddness of art." - Henry James -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- ---------- Forwarded message ---------- Date: Wed, 29 May 2002 15:11:05 -0400 (EDT) From: Phillip G Deneault <deneault(a)wpi.edu> To: wlug(a)mail.wlug.org Subject: FORSALE: DEC 3000 model 900 Full size DEC 3000 model 900 275mhz Alpha 128 megs of RAM 7 internal drive bays 50-pin SCSI, 2 bus chains 1 4 gig hard drive, 1 dual speed caddy CD-ROM built in ethernet RGB video card w/21 inch RGB monitor cables, mice, keyboards, etc Works well, provided as is...$300 obo I run Tru64 on it and I am not sure if Linux will run on it. Any questions e-mail me Phil -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Phil Deneault "We work in the dark, We do what we can, deneault(a)wpi.edu We give what we have. Our doubt is our passion, WPI NetOps and our passion is our task. The rest is the OpenVMS Guy maddness of art." - Henry James -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

June 3, 2002

Re: [Wlug] Wireless nics and linux.

by Jeremy

I had a orinoco card working under linux a while ago.. It seemed to work well at my wireless net in worcester. It varies from card to card: DLINK has linux drivers, lucent has unoffical ports (orinoco cards), 3Com used to have one, but it was a rebrand of another card (symbol S24) Anyone else using lucent cards? if you can afford i would recommend 'em. I bought a 3Com card orginally and thought it would be good, but had quality issues. So I got the Lucent card and am much happier. DLINK is surprising good, but not sure about the linux support. --- Wesley Allen <wallen(a)charter.net> wrote: > Hi All, > I may be FINALLY getting some wireless access in my house (It's amazing > what a simple furniture move can accomplish). So I'm wondering, what > wireless nics work in Linux. I've heard that there are some problems, > do any of you have 802.11b networks at home (what's the mac address > range.....wink)? If so, what nics are you using. Do the USB one's work > (actually, I'll check this one out on my own, it's the pcmcia cards I > need the info on). > > Thanks, > Wes > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug ===== - __________________________________________________ Do You Yahoo!? Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com

June 3, 2002

Re: [Wlug] monitoring a Matrix 3000

by stoffel＠lucent.com

Bill> I sent the message below to the UPS mailing list, but it's a pretty Bill> slow list, so I thought I'd see if anyone on WLUG might have an idea. Bill> I'm beginning to suspect a serial line configuration issue. I'm using apcupsd at home with a Matrix SmartUPS and it works just great. Have you tried that package? Also, making sure the cable and serial ports are working first is a good thing too. I may be able to find a cable or two since we've stopped using Matrix 3k/5k here now that we have a generator. Life is trully good now. John John Stoffel - Senior Unix Systems Administrator - Lucent Technologies stoffel(a)lucent.com - http://www.lucent.com - 978-399-0479

June 3, 2002

Wireless nics and linux.

by Wesley Allen

Hi All, I may be FINALLY getting some wireless access in my house (It's amazing what a simple furniture move can accomplish). So I'm wondering, what wireless nics work in Linux. I've heard that there are some problems, do any of you have 802.11b networks at home (what's the mac address range.....wink)? If so, what nics are you using. Do the USB one's work (actually, I'll check this one out on my own, it's the pcmcia cards I need the info on). Thanks, Wes

June 3, 2002

Re: [Wlug] monitoring a Matrix 3000

by Karl Hiramoto

Also, can you use either of those cables you have and make it work with a PC and M$ windows? That would close in on if you have a cable problem. On Mon, 3 Jun 2002, Bill Mills-Curran wrote: > I sent the message below to the UPS mailing list, but it's a pretty > slow list, so I thought I'd see if anyone on WLUG might have an idea. > I'm beginning to suspect a serial line configuration issue. > > Any ideas? > > Thanks, > Bill Mills-Curran > > > > ---------- Forwarded message ---------- > Date: Mon, 3 Jun 2002 08:29:56 -0400 (EDT) > To: Ups mailing list <ups(a)lists.exploits.org> > Subject: monitoring a Matrix 3000 > > Hi, > > I've installed the nut rpm's from the RedHat 7.2 distribution: > > nut-cgi-0.45.0-3 > nut-0.45.0-3 > nut-client-0.45.0-3 > > I am attempting to monitor the state of 2 APC Matrix UPS's; a model > 3000 and a model 5000. > > I have two different sets of cables to work with; 940-0020B and > 940-0024C. > > In short, I can't get any indication of communication between my linux > box and the UPS. I've looked through the FAQ's and other > documentation pretty carefully, but I must be missing something. Any > direction anyone can give would be appreciated. > > Documentation for these UPS's can be found at: > > http://sturgeon.apcc.com/techref.nsf/docID/3BF5FC2524F090888525675200631528… > > There's a description of the pinouts on p. 39. > > **************** > Basic setup: > > I have a couple of racks of inter-dependent equipment powered from 2 > UPS's. The interdependence forces me to shut down all machines before > either UPS fails. > > I plan to use a single linux box to monitor the state of the UPS's and > to send shutdown signals (via small private network) to the servers > when the battery gets low. > > The linux box is old hardware, but the linux software installation is > new. > > In an effort to simplify the problem, I've dropped back to monitoring > a single UPS. > > Below are the config files and results for using the two different > cable types. For both config's, I set the permissions on /dev/ttyS0 > to 666. > > **************** > Using the 940-0020B cables. > > Config files (without the comments): > > **** > # /etc/sysconfig/ups > SERVER=yes > MODEL=genericups > DEVICE=/dev/ttyS0 > OPTIONS="-t 2" > **** > # /etc/ups/upsd.conf > > UPS tls01 /usr/bin/genericups-ttyS0 -t 2 /dev/ttyS0 > ACL all 0.0.0.0/0 > ACL localhost 127.0.0.1/32 > ACCESS grant monitor localhost password > ACCESS deny all all > **** > # /etc/ups/upsmon.conf > > MONITOR tls01@localhost 1 password slave > MINSUPPLIES 1 > SHUTDOWNCMD "/root/bin/ups.pl shutdown" > NOTIFYCMD "/root/bin/ups.pl notify" > POLLFREQ 5 > POLLFREQALERT 5 > HOSTSYNC 15 > DEADTIME 15 > POWERDOWNFLAG /etc/killpower > RBWARNTIME 43200 > NOCOMMWARNTIME 300 > ******* > Results: > > 1. The services (genericups, upsd, upsmonitor) started ok. I do get > the message: UPS tls01@localhost is unavailable > > 2. upsc tls01@localhost gives the following: > > host: tls01@localhost > No variables available! Check your upsd.conf entry for this UPS > > **************** > Using the 940-0024C cables. > > Config files (without the comments): > > **** > # /etc/sysconfig/ups > SERVER=yes > MODEL=apcsmart > DEVICE=/dev/ttyS0 > OPTIONS= > **** > # /etc/ups/upsd.conf > > UPS tls01 /usr/bin/apcsmart-ttyS0 /dev/ttyS0 > ACL all 0.0.0.0/0 > ACL localhost 127.0.0.1/32 > ACCESS grant monitor localhost password > ACCESS deny all all > **** > # /etc/ups/upsmon.conf > > MONITOR tls01@localhost 1 password slave > MINSUPPLIES 1 > SHUTDOWNCMD "/root/bin/ups.pl shutdown" > NOTIFYCMD "/root/bin/ups.pl notify" > POLLFREQ 5 > POLLFREQALERT 5 > HOSTSYNC 15 > DEADTIME 15 > POWERDOWNFLAG /etc/killpower > RBWARNTIME 43200 > NOCOMMWARNTIME 300 > ******* > Results: > > 1. The services (apcsmart, upsd, upsmonitor) started ok. I do get > the message: UPS tls01@localhost is unavailable > > 2. upsc tls01@localhost gives the following: > > host: tls01@localhost > No variables available! Check your upsd.conf entry for this UPS > > **************** > > What am I doing wrong? > > TIA, > Bill > > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Facts are stubborn, but statistics are more pliable.

June 3, 2002

Re: [Wlug] monitoring a Matrix 3000

by Karl Hiramoto

Eliminate the basic stuff. Is the Serial port working? Hookup a null modem to another box and verify that. On Mon, 3 Jun 2002, Bill Mills-Curran wrote: > I sent the message below to the UPS mailing list, but it's a pretty > slow list, so I thought I'd see if anyone on WLUG might have an idea. > I'm beginning to suspect a serial line configuration issue. > > Any ideas? > > Thanks, > Bill Mills-Curran > > > > ---------- Forwarded message ---------- > Date: Mon, 3 Jun 2002 08:29:56 -0400 (EDT) > To: Ups mailing list <ups(a)lists.exploits.org> > Subject: monitoring a Matrix 3000 > > Hi, > > I've installed the nut rpm's from the RedHat 7.2 distribution: > > nut-cgi-0.45.0-3 > nut-0.45.0-3 > nut-client-0.45.0-3 > > I am attempting to monitor the state of 2 APC Matrix UPS's; a model > 3000 and a model 5000. > > I have two different sets of cables to work with; 940-0020B and > 940-0024C. > > In short, I can't get any indication of communication between my linux > box and the UPS. I've looked through the FAQ's and other > documentation pretty carefully, but I must be missing something. Any > direction anyone can give would be appreciated. > > Documentation for these UPS's can be found at: > > http://sturgeon.apcc.com/techref.nsf/docID/3BF5FC2524F090888525675200631528… > > There's a description of the pinouts on p. 39. > > **************** > Basic setup: > > I have a couple of racks of inter-dependent equipment powered from 2 > UPS's. The interdependence forces me to shut down all machines before > either UPS fails. > > I plan to use a single linux box to monitor the state of the UPS's and > to send shutdown signals (via small private network) to the servers > when the battery gets low. > > The linux box is old hardware, but the linux software installation is > new. > > In an effort to simplify the problem, I've dropped back to monitoring > a single UPS. > > Below are the config files and results for using the two different > cable types. For both config's, I set the permissions on /dev/ttyS0 > to 666. > > **************** > Using the 940-0020B cables. > > Config files (without the comments): > > **** > # /etc/sysconfig/ups > SERVER=yes > MODEL=genericups > DEVICE=/dev/ttyS0 > OPTIONS="-t 2" > **** > # /etc/ups/upsd.conf > > UPS tls01 /usr/bin/genericups-ttyS0 -t 2 /dev/ttyS0 > ACL all 0.0.0.0/0 > ACL localhost 127.0.0.1/32 > ACCESS grant monitor localhost password > ACCESS deny all all > **** > # /etc/ups/upsmon.conf > > MONITOR tls01@localhost 1 password slave > MINSUPPLIES 1 > SHUTDOWNCMD "/root/bin/ups.pl shutdown" > NOTIFYCMD "/root/bin/ups.pl notify" > POLLFREQ 5 > POLLFREQALERT 5 > HOSTSYNC 15 > DEADTIME 15 > POWERDOWNFLAG /etc/killpower > RBWARNTIME 43200 > NOCOMMWARNTIME 300 > ******* > Results: > > 1. The services (genericups, upsd, upsmonitor) started ok. I do get > the message: UPS tls01@localhost is unavailable > > 2. upsc tls01@localhost gives the following: > > host: tls01@localhost > No variables available! Check your upsd.conf entry for this UPS > > **************** > Using the 940-0024C cables. > > Config files (without the comments): > > **** > # /etc/sysconfig/ups > SERVER=yes > MODEL=apcsmart > DEVICE=/dev/ttyS0 > OPTIONS= > **** > # /etc/ups/upsd.conf > > UPS tls01 /usr/bin/apcsmart-ttyS0 /dev/ttyS0 > ACL all 0.0.0.0/0 > ACL localhost 127.0.0.1/32 > ACCESS grant monitor localhost password > ACCESS deny all all > **** > # /etc/ups/upsmon.conf > > MONITOR tls01@localhost 1 password slave > MINSUPPLIES 1 > SHUTDOWNCMD "/root/bin/ups.pl shutdown" > NOTIFYCMD "/root/bin/ups.pl notify" > POLLFREQ 5 > POLLFREQALERT 5 > HOSTSYNC 15 > DEADTIME 15 > POWERDOWNFLAG /etc/killpower > RBWARNTIME 43200 > NOCOMMWARNTIME 300 > ******* > Results: > > 1. The services (apcsmart, upsd, upsmonitor) started ok. I do get > the message: UPS tls01@localhost is unavailable > > 2. upsc tls01@localhost gives the following: > > host: tls01@localhost > No variables available! Check your upsd.conf entry for this UPS > > **************** > > What am I doing wrong? > > TIA, > Bill > > > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug > -- ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Karl Hiramoto <karl(a)hiramoto.org> Work: 978-425-2090 ext 25 Cell: 508-517-4819 Personal web page: http://karl.hiramoto.org/ Zoop Productions: http://www.zoop.org/ KTEQ Rapid City: http://www.kteq.org/ AOL IM ID = KarlH420 ¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø Facts are stubborn, but statistics are more pliable.

June 3, 2002

Re: [Wlug] monitoring a Matrix 3000

by Theo Van Dinter

On Mon, Jun 03, 2002 at 02:32:14PM -0400, Bill Mills-Curran wrote: > I sent the message below to the UPS mailing list, but it's a pretty > slow list, so I thought I'd see if anyone on WLUG might have an idea. > I'm beginning to suspect a serial line configuration issue. > > I have two different sets of cables to work with; 940-0020B and > 940-0024C. Well, in my recollection, the 20B is the grey "dumb" cable, and the 24C is the black "smart" cable. The Matrix is, I believe, essentially just a big SmartUPS. I would try using the 24C cable, then downloading PowerChute from the APC website (www.apcc.com) I'm currently using it on a SM700 and it works pretty well. Never messed around with a MatrixUPS before, so ... YMMV. -- Randomly Generated Tagline: DOS: n., A small annoying boot virus that causes random spontaneous system crashes, usually just before saving a massive project. Easily cured by UNIX. See also MS-DOS, IBM-DOS, DR-DOS. (from David Vicker's .plan)

June 3, 2002

monitoring a Matrix 3000

by Bill Mills-Curran

I sent the message below to the UPS mailing list, but it's a pretty slow list, so I thought I'd see if anyone on WLUG might have an idea. I'm beginning to suspect a serial line configuration issue. Any ideas? Thanks, Bill Mills-Curran ---------- Forwarded message ---------- Date: Mon, 3 Jun 2002 08:29:56 -0400 (EDT) To: Ups mailing list <ups(a)lists.exploits.org> Subject: monitoring a Matrix 3000 Hi, I've installed the nut rpm's from the RedHat 7.2 distribution: nut-cgi-0.45.0-3 nut-0.45.0-3 nut-client-0.45.0-3 I am attempting to monitor the state of 2 APC Matrix UPS's; a model 3000 and a model 5000. I have two different sets of cables to work with; 940-0020B and 940-0024C. In short, I can't get any indication of communication between my linux box and the UPS. I've looked through the FAQ's and other documentation pretty carefully, but I must be missing something. Any direction anyone can give would be appreciated. Documentation for these UPS's can be found at: http://sturgeon.apcc.com/techref.nsf/docID/3BF5FC2524F090888525675200631528… There's a description of the pinouts on p. 39. **************** Basic setup: I have a couple of racks of inter-dependent equipment powered from 2 UPS's. The interdependence forces me to shut down all machines before either UPS fails. I plan to use a single linux box to monitor the state of the UPS's and to send shutdown signals (via small private network) to the servers when the battery gets low. The linux box is old hardware, but the linux software installation is new. In an effort to simplify the problem, I've dropped back to monitoring a single UPS. Below are the config files and results for using the two different cable types. For both config's, I set the permissions on /dev/ttyS0 to 666. **************** Using the 940-0020B cables. Config files (without the comments): **** # /etc/sysconfig/ups SERVER=yes MODEL=genericups DEVICE=/dev/ttyS0 OPTIONS="-t 2" **** # /etc/ups/upsd.conf UPS tls01 /usr/bin/genericups-ttyS0 -t 2 /dev/ttyS0 ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACCESS grant monitor localhost password ACCESS deny all all **** # /etc/ups/upsmon.conf MONITOR tls01@localhost 1 password slave MINSUPPLIES 1 SHUTDOWNCMD "/root/bin/ups.pl shutdown" NOTIFYCMD "/root/bin/ups.pl notify" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower RBWARNTIME 43200 NOCOMMWARNTIME 300 ******* Results: 1. The services (genericups, upsd, upsmonitor) started ok. I do get the message: UPS tls01@localhost is unavailable 2. upsc tls01@localhost gives the following: host: tls01@localhost No variables available! Check your upsd.conf entry for this UPS **************** Using the 940-0024C cables. Config files (without the comments): **** # /etc/sysconfig/ups SERVER=yes MODEL=apcsmart DEVICE=/dev/ttyS0 OPTIONS= **** # /etc/ups/upsd.conf UPS tls01 /usr/bin/apcsmart-ttyS0 /dev/ttyS0 ACL all 0.0.0.0/0 ACL localhost 127.0.0.1/32 ACCESS grant monitor localhost password ACCESS deny all all **** # /etc/ups/upsmon.conf MONITOR tls01@localhost 1 password slave MINSUPPLIES 1 SHUTDOWNCMD "/root/bin/ups.pl shutdown" NOTIFYCMD "/root/bin/ups.pl notify" POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower RBWARNTIME 43200 NOCOMMWARNTIME 300 ******* Results: 1. The services (apcsmart, upsd, upsmonitor) started ok. I do get the message: UPS tls01@localhost is unavailable 2. upsc tls01@localhost gives the following: host: tls01@localhost No variables available! Check your upsd.conf entry for this UPS **************** What am I doing wrong? TIA, Bill

June 3, 2002