September 2001 - WLUG - wlug.mailman3.com

Single disk linux distros

by Track

Hey folks! I have been recently playing with the likes of Freesco and Smoothwall for a router solution based on a single floppy disk. I was wondering if anyone has heard of or used the same sort of setup for a webserver application. I thought I remember seeing something about "WAD" aka Webserver on a Disk. Anyone have any experience with this? TIA! --Track -- Tim Trachimowicz track at trackspace dot com http://www.trackspace.com

Sept. 20, 2001

Re: [mwblug] [newbie] one last (maling list) hurrah for USA

by pSudonic

now if they just had some long sleeve t's. i would get the female hackers coalition but i don't think they would fit heheh ----- Original Message ----- From: "Jeff Reed" <jmr71769(a)earthlink.net> To: <mwblug(a)linuxbusca.com>; <newbie(a)linux-mandrake.com>; <wlug(a)mail.wlug.org> Sent: Sunday, September 16, 2001 11:33 AM Subject: [mwblug] [newbie] one last (maling list) hurrah for USA > i would personally like to thank the JINX hackwear company > for sincerely expressing exactly how i feel on their front > page... > > check it out... > > http://www.jinxhackwear.com/ > > -- > > //-- Jeff Reed > //-- Co-founder / Odd (Job) Guy > //-- Metro West Boston Linux User Group > //-- jreed(a)linuxbusca.com > > ---------------------------------------------------------------------------- ---- > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com > > ---------------------------------------------------------------------------- ---- > --------------------------------------------------------------------- > To unsubscribe, e-mail: mwblug-unsubscribe(a)linuxbusca.com > For additional commands, e-mail: mwblug-help(a)linuxbusca.com

Sept. 20, 2001

Re: [Wlug] make bzdisk

by doug waud

Andy Stewart wrote: > I've seen this happen on a couple of occasions. A bad floppy will cause > it. Try dd'ing to another floppy. Another trick is to first try /sbin/badblocks -v /dev/fd0 1440 to make sure the floppy is not defective. The dd process is too primitive to check for such things on its own. It just spews the stuff out and hopes it will land intact. doug -- Douglas R Waud, Professor Emeritus -- Pharmacology University of Massachusetts Medical School Mailing address: 17 Lantern Lane, Shrewsbury, MA 01545-2006

Sept. 17, 2001

startup scripts & pid

by Bill Mills-Curran

I'm installing an ircd variant (ircd-hybrid-7) on a server at work. I didn't find an rpm for this newer version, so one of the people in my group built it. However, there is no startup script, so we'll have to cook one ourselves. I have a question about storing the pid in /var/run. Does one of the common functions in the functions script (/etc/rc.d/init.d/functions) handle storing the pid, or is that something that most daemons have built-in? I've found shell code for killing processes using the pid from /var/run, but nothing for storing the pid. Another question... Is there a decent template for writing our own script? I hate to reinvent the wheel. (I never seem to get it very round.) Any suggestions? Thanks, Bill

Sept. 17, 2001

Re: [Wlug] make bzdisk

by Andy Stewart

I've seen this happen on a couple of occasions. A bad floppy will cause it. Try dd'ing to another floppy. Later, Andy On Sunday 16 September 2001 07:02 pm, you wrote: > I downloaded the 2.4.9 kernel and built myself a new, up to date kernel, > which works fine. I can run 'make bzdisk' and it dd's the kernel to the > floppy. When I try to boot the floppy, I get loading > ............................................... (lots of dots...) > followed by these numbers; > 0400 > AX:0212 > BX:7400 > CX:5009 > DX:0000 > > These repeat until I reboot with out the floppy. > > What's going on???? make bzdisk used to work, should I use another > command to create a bootable floppy with the kernel? > > Thanks, > Chuck > > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug -- Andy Stewart Founder Worcester Linux Users' Group Worcester, MA, USA http://www.wlug.org

Sept. 16, 2001

make bzdisk

by cc.noyes

I downloaded the 2.4.9 kernel and built myself a new, up to date kernel, which works fine. I can run 'make bzdisk' and it dd's the kernel to the floppy. When I try to boot the floppy, I get loading ............................................... (lots of dots...) followed by these numbers; 0400 AX:0212 BX:7400 CX:5009 DX:0000 These repeat until I reboot with out the floppy. What's going on???? make bzdisk used to work, should I use another command to create a bootable floppy with the kernel? Thanks, Chuck

Sept. 16, 2001

Re: [mwblug] one last (maling list) hurrah for USA

by rek2

YAP! On Sunday 16 September 2001 11:33, Jeff Reed wrote: <><>i would personally like to thank the JINX hackwear company <><>for sincerely expressing exactly how i feel on their front <><>page... <><> <><>check it out... <><> <><>http://www.jinxhackwear.com/ <><> -- --------------------------------------------------------------------------------------------------------------------------------------- http://www.tuxedo.org/~esr/jargon/jargon.html#cyberpunk Since 1990 or so, popular culture has included a movement or fashion trend that calls itself `cyberpunk', associated especially with the rave/techno subculture. Hackers have mixed feelings about this. On the one hand, self-described cyberpunks too often seem to be shallow trendoids in black leather who have substituted enthusiastic blathering about technology for actually learning and doing it. Attitude is no substitute for competence. On the other hand, at least cyberpunks are excited about the right things and properly respectful of hacking talent in those who have it. The general consensus is to tolerate them politely in hopes that they'll attract people who grow into being true hackers. --------------------------------------------------------------------------------------------------------------------------------------------- Hacker /n./1. A person who enjoys exploring the details of programmable systems and how to stretch their capabilities, as opposed to most users, who prefer to learn only the minimum necessary. 2. One who programs enthusiastically (even obsessively) or who enjoys programming rather than ust theorizing about programming. 3. A person capable of appreciating hack value. 4. A person who is good at programming quickly. 5. An expert at a particular program, or one who frequently does work using it or on it; as in `a Unix hacker'. (Definitions 1 through 5 are correlated, and people who fit them congregate.) 6. An expert or enthusiast of any kind. One might be an astronomy hacker, for example. 7. One who enjoys the intellectual challenge of creatively overcoming or circumventing limitations.

Sept. 16, 2001

one last (maling list) hurrah for USA

by Jeff Reed

i would personally like to thank the JINX hackwear company for sincerely expressing exactly how i feel on their front page... check it out... http://www.jinxhackwear.com/ -- //-- Jeff Reed //-- Co-founder / Odd (Job) Guy //-- Metro West Boston Linux User Group //-- jreed(a)linuxbusca.com

Sept. 16, 2001

Re: Laptop recommendations

by Robert L Krawitz

I found an HP Pavilion 5470 for $1500 at Circuit City. It was a return. It's only 1024x768, which is less than I want (although it is a 15" display), but with 256 MB, the price, and the combo CDRW/DVD drive, it looked awfully appealing. I have 14 days to decide whether to keep it (there's no restocking fee, since it was an open box). It has a non-Lucent lusemodem. The processor is an Athlon 4/1GHz, for what little that's worth; it's way, way cheaper than anything similar on Pricewatch. According to http://www.deater.net/john/PavilionN5430.html, it's possible to run Linux on it, albeit it uses a not very well supported Trident chipset, among other things. Is anyone familiar with this laptop? Comments? -- Robert Krawitz <rlk(a)alum.mit.edu> http://www.tiac.net/users/rlk/ Tall Clubs International -- http://www.tall.org/ or 1-888-IM-TALL-2 Member of the League for Programming Freedom -- mail lpf(a)uunet.uu.net Project lead for Gimp Print/stp -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton

Sept. 13, 2001

Re: [Wlug] Unable to obtain an IP

by Mike Frysinger

i thought the fact that my 3com nic [a 3c905] was odd in the fact it was using the module 3c59* until i looked for the driver via google and looked at the doc's on it in the kernel help page ... the module that is called 3c59* supports all of these nics: x "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) x "Boomerang" (EtherLink XL 3c900 or 3c905) x "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) x "Tornado" (3c905) x "Hurricane" (3c555/3cSOHO) ... the original driver was meant for the 3c59* nic's, but the original coder found that other, similar 3com nic's had no linux support, so he added in a bunch of 3c90* nic's to his module, but retained the original name. thus, keep the 3c59* module and dont change it, when i forced usage of 3c90*, it broke my nic [i.e. it didnt work], but the 3c59* worked fine -mike ----- Original Message ----- From: "Eric Frederick" <efreder1(a)hotmail.com> To: <wlug(a)mail.wlug.org> Sent: Thursday, September 13, 2001 02:55 AM Subject: Re: [Wlug] Unable to obtain an IP > > EF>I reinstalled Redhat 7.1 on my computer at school and I am unable to > > EF>connect to the internet. I have only been using Linux for about 7-8 > > EF>months and I am still a novice. When I was using Redhat 7.1 last > > EF>spring, it worked fine. > > > > WS>what happened between then and now? new hard drive? (just curious; > i'm > > WS>of the If-it-ain't-broke-don't-fix-it school... <g>) > > I updated the system using Redhat's upgrade system and I recieved errors > messages > and things stopped working. Since I had no clue how to fix it, I > said forget it. > > > EF>I am using a 3com Etherlink card (the driver > > EF>is 3c905c-tx in windows) and my computer seems to detect it correctly. > > > > WS>you know this from the boot up screen? > > I got the information about the NIC by using the command "ifconfig eth0." > The command displays the driver installed for the device. > > > EF>However, it is using the 3com59* driver. I tried to switch to the > > EF>driver to 3com90*, but my computer stopped recognizing the card so I > > EF>doubt it is a driver problem. (Plus, it was using the same driver last > > EF>spring.) > > > > WS>how were you doing this? usually, all you should need to do is > re-compile > > WS>the kernel if support for your Network Interface Card (NIC) isn't there > > WS>already. > > Since I have no clue about recompiling the kernel, I made the changes using > linuxconf. It is a GUI program that is supposed to reconfigure things for > you. > > > EF>I also tried pump -i eth0 and it failed. > > > > WS>i'm not familiar with "pump"... does it have something to do with > DHCP? > > >From what I understand, pump a the program that works with DHCP to get IP > addresses. I am using the DHCP client rather than BOOTP (something like > that.) > since that is what I am supposed to use. > > > EF>Also, I entered an IP hoping that it would pick something up but that > > EF>does not work either. > > > > WS>generally, you can't just "assign" an IP address, unless it's for your > own > > WS>LAN. if you're connecting that system to a LAN AND a dial-up, then you > > WS>need to be careful that your network address isn't something that > > WS>technically belongs to someone else. (for example, it might be nice to > > WS>have a LAN at home with 18.100.x.x, but i'll bet MIT would have > something > > WS>to say to you if you tried to connect that to the 'Net...) > > WS>for private networks, there are a few generally accepted networks that > > WS>work out, since they are Officially Unassigned. try something in the > > WS>192.168.x.x range. if the LAN and the Dial Up are on the same machine, > > WS>there might be a routing issue on the local box. > > The IP address was for my LAN at school. The network officials recommended > that I take this action to resolve the problem. Also, they told me that > they know hardly anything about Linux so I am not about to ask them for more > help. > > > EF>Does anyone know what could be done to resolve the problem or > > EF>at least direct me somewhere. > > > > WS>worst-case, you could always try checking the wire to make sure that > it's > > WS>connected securely. you'd be surprised how many times i've found that > to > > WS>be a problem. <sigh> ;) > > The NIC works on my DOS drive so I doubt that it is a problem. :) However, > could this problem occur if I let the Redhat install program reformat the > drive for me? Should I format the drive myself and then reinstall and see > if the problem is resolved? > > > WS>hope this helps... > > Thank you very much for the advice. I know I should learn to fix the system > rather than format it, but it is hard for me to do that while I am at > school. I have very little time to learn Linux, but I like Linux much > better than Windows and I am trying to convert. I have learned not to > upgrade until I know more about the OS and how to fix it. :-) > > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

Sept. 13, 2001