June 2001 - WLUG - wlug.mailman3.com

Re: [Wlug] Setting up cable modem (Charter)

by Charles R. Anderson

rpm -q pump pump is Red Hat's DHCP client. If the above command shows output, then it is installed. Could you post the output of "/sbin/ifconfig -a"? On Sat, 30 Jun 2001, Thomas Carey wrote: tcarey> I apologize if I confused anyone. One nic is a Intel Pro tcarey> 100+. the other nic is a 3COM 3C905C. I alternated nics to tcarey> see if maybe one was not loading. Dumb question. How do I tcarey> know if pump is installed? Please be patient, I'm fairly tcarey> new to Linux (but have used it in the past as a web and tcarey> FTP server). Charles R. Anderson <cra(a)wpi.edu> / http://angus.ind.wpi.edu/~cra/ PGP Key ID: 49BB5886 Fingerprint: EBA3 A106 7C93 FA07 8E15 3AC2 C367 A0F9 49BB 5886

June 30, 2001

Re: [Wlug] Setting up cable modem (Charter)

by Thomas Carey

June 30, 2001

Re: [Wlug] Setting up cable modem (Charter)

by Peter Gutowski

On 6/30/01 3:34 PM, Thomas Carey <tcarey70(a)hotmail.com> wrote: > >I know I have seen several posts in the past, but I need a little >information on setting up my cable modem through Charter. > >A little background information; > >Red Hat 7.1 installed. > >I have two nics installed, one static (192.168.1.1 internal scheme), >one DHCP (connected to the cable modem, the cable modem when installed >by Charter was assigned 192.168.100.1). > >On boot up eth1 fails (eth1 is fine on boot up). I know I am probably >missing some configuration somewhere. I know both nic's are working >fine. After the first failed boot up (on eth1) I switched the cards, >and the static nic was fine. I'm assuming you've made a minor typing mistake in the first sentence of the previous paragraph (otherwise very confusing) I'm assuming also that you're saying that the internal card boots OK and the card hooked to the cable modem is failing: - be sure the driver module for the cable modem eth card is loaded (e.g 'insmod 3c90x' or whatever for your card ) - be sure the 'pump' package in installed > >Any ideas? If any of the above doesn't help, please give more info re: type of cards, excerpts of log files showing error messages, etc. config files, (e.g./etc/sysconfig/network-scripts/ifcfg-eth1) > >TIA > >Tom Carey >Get your FREE download of MSN Explorer at http://explorer.msn.com ><http://explorer.msn.com> >_______________________________________________ Wlug mailing list >Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

June 30, 2001

Setting up cable modem (Charter)

by Thomas Carey

June 30, 2001

Re: [Wlug] rpm problem

by Charles R. Anderson

On Sat, 30 Jun 2001, Marc Hughes wrote: mhughe> Any ideas on how I can actually remove those two identical mhughe> packages that somehow got installed? (mozilla does not in mhughe> fact work correctly) rpm -e --allmatches mozilla

June 30, 2001

Re: [Wlug] rpm problem

by Scott Venier

Try maybe using --force? On Sat, 30 Jun 2001, Marc Hughes wrote: > > Having a problem with RPM... > > # rpm -qa |grep mozilla > mozilla-0.9.1-ximian.4 > nautilus-mozilla-1.0.3-ximian.3 > mozilla-0.9.1-ximian.4 > > # rpm -e mozilla-0.9.1 > error: "mozilla-0.9.1" specifies multiple packages > > # rpm -e mozilla-0.9.1-ximian.4 > error: "mozilla-0.9.1-ximian.4" specifies multiple packages > > > Any ideas on how I can actually remove those two identical packages that > somehow got installed? (mozilla does not in fact work correctly) > > Thanks, > -Marc > _______________________________________________ > Wlug mailing list > Wlug(a)mail.wlug.org > http://mail.wlug.org/mailman/listinfo/wlug >

June 30, 2001

rpm problem

by Marc Hughes

Having a problem with RPM... # rpm -qa |grep mozilla mozilla-0.9.1-ximian.4 nautilus-mozilla-1.0.3-ximian.3 mozilla-0.9.1-ximian.4 # rpm -e mozilla-0.9.1 error: "mozilla-0.9.1" specifies multiple packages # rpm -e mozilla-0.9.1-ximian.4 error: "mozilla-0.9.1-ximian.4" specifies multiple packages Any ideas on how I can actually remove those two identical packages that somehow got installed? (mozilla does not in fact work correctly) Thanks, -Marc

June 30, 2001

Familiar Linux help...

by Wesley Allen

Hello all. I am FINALLY getting an iPaq and want to flash the ROM to install familar linux (or QT embedded). I've been looking over the howtos but I think I would feel better to have someone who's done this sitting over my shoulder so I don't make a $600 paperweight. Also, can someone tell me what apps are in ipkg format for familiar, I've been having trouble finding them? What about the possibility of switching between QT embedded and X for other useful apps (like, game boy emulators, for instance, or even the Atari Lynx...). Can anyone help me with this? Wes

June 29, 2001

RE: [Wlug] HP LH Pro...

by Keller, Tim

Figured it out... Turned out that I could change the boot order on the machine, its working fine now. Tim. -----Original Message----- From: Keller, Tim [mailto:Tim.Keller@stratus.com] Sent: Friday, June 29, 2001 8:19 AM To: 'wlug(a)wlug.org' Subject: [Wlug] HP LH Pro... Probably a quick one, but neither google or I have sorted it out yet... I have a HP LH PRO with a AMI Megaraid controller in it. Connected to the controller are 2 4gig disks I've got configured to be mirrored using the hardware raid. (when doing the install you only see 1 4 gig disk) Now Mandrake 7.2 installs fine, and when using a boot floppy can see the controller etc... however when booting off of the controller, lilo comes up, it finds the kernel image and then stops at "unpacking the kernel..." I don't get any errors, it just hangs. I hooked up a regular scsi disk to one of the other Adaptec controllers but by the nature of the way the machine is layered out sda is the raid controller so the boot sector ends up on it anyway. My kernel works properly because it can access all the filesystems that reside on those disks, I just can't boot off of them. It feels like an issue with lilo... If anybody has experience with this I'd like to know what the solution would be. Thanks, Tim _______________________________________________ Wlug mailing list Wlug(a)mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug

June 29, 2001

HP LH Pro...

by Keller, Tim

Probably a quick one, but neither google or I have sorted it out yet... I have a HP LH PRO with a AMI Megaraid controller in it. Connected to the controller are 2 4gig disks I've got configured to be mirrored using the hardware raid. (when doing the install you only see 1 4 gig disk) Now Mandrake 7.2 installs fine, and when using a boot floppy can see the controller etc... however when booting off of the controller, lilo comes up, it finds the kernel image and then stops at "unpacking the kernel..." I don't get any errors, it just hangs. I hooked up a regular scsi disk to one of the other Adaptec controllers but by the nature of the way the machine is layered out sda is the raid controller so the boot sector ends up on it anyway. My kernel works properly because it can access all the filesystems that reside on those disks, I just can't boot off of them. It feels like an issue with lilo... If anybody has experience with this I'd like to know what the solution would be. Thanks, Tim

June 29, 2001