Folks, I've not been WLUG active for a year or more. Back then the half of my 111 gig PC disc which was dual booted with FEDORA developed a permanent error. The other half's XP installation has been OKAY. I have learned to us WINDOWS. Meanwhile my SUN ULTRA running as an Aurora SPARC SAMBA file server since 1993 has been chugging along just fine. I live in Fitchburg. We have been without power for nine days. 110 volts came up yesterday evening. Much to my chegrin my SUN was unhappy. I used a rescueCD to boot. All came back except my ethernet card. It would not start. The little light at the far end on the IP cord does not glow... --------- /etc/rc.d/init.d/network restart says, "Bringing up interface eth0: Determining IP information for eth0 ... failed. [FAILED]" The card is claimed to be a 'sunlance' card. Any ideas? Is the card fried do you think? I have a second SPARC machine. It's ethernet was working last time it was powered. Must I swap? Ken Jones
On Sun, Dec 21, 2008 at 06:31:40PM -0500, Ken Jones wrote:
/etc/rc.d/init.d/network restart
says, "Bringing up interface eth0: Determining IP information for eth0 ... failed. [FAILED]"
The card is claimed to be a 'sunlance' card.
Any ideas? Is the card fried do you think?
Maybe, or maybe the device at the other end of the cable is fried. Have you tried a different switch port, new cable, etc? What shows up when you do: /sbin/ifconfig eth0 /sbin/ethtool eth0 /sbin/mii-tool eth0
I have a second SPARC machine. It's ethernet was working last time it was powered. Must I swap?
Mabye, but I'd try some of the above diagnostics first.
i have a Sun Ultra 30 i haven't used in a few years that got a little wet during this past storm. If you could use it to fix yours, you are welcome to it (free as in pizza), but you'll have to come get it after this week as I'm going to Texas until Friday. Let me know if you're interested and I'll see if my mom-in-law (who is staying here while I am gone) can arrange for you to come get it if you can't wait. ________________________________ From: Ken Jones <kjones@ziplink.net> To: wlug@mail.wlug.org Sent: Sunday, December 21, 2008 6:31:40 PM Subject: [Wlug] Aurora - SPARC question.... Folks, I've not been WLUG active for a year or more. Back then the half of my 111 gig PC disc which was dual booted with FEDORA developed a permanent error. The other half's XP installation has been OKAY. I have learned to us WINDOWS. Meanwhile my SUN ULTRA running as an Aurora SPARC SAMBA file server since 1993 has been chugging along just fine. I live in Fitchburg. We have been without power for nine days. 110 volts came up yesterday evening. Much to my chegrin my SUN was unhappy. I used a rescueCD to boot. All came back except my ethernet card. It would not start. The little light at the far end on the IP cord does not glow... --------- /etc/rc.d/init.d/network restart says, "Bringing up interface eth0: Determining IP information for eth0 ... failed. [FAILED]" The card is claimed to be a 'sunlance' card. Any ideas? Is the card fried do you think? I have a second SPARC machine. It's ethernet was working last time it was powered. Must I swap? Ken Jones
participants (3)
-
Chuck Anderson -
Ken Jones -
Mike Leo