I have a question about hotplugging & USB and some differences I see between 2 different FC3 systems (home & work). **** Home Initially, I configured my drive at home. I did NOT have the menu item: Preferences -> Removable Storage set to "Mount removable drives when hot-plugged". Without realizing that this was an option, I used manual entries in fstab: # usb drive LABEL=usblinux /mnt/usb/linux auto defaults,user 0 0 /dev/sde2 /mnt/usb/windows auto defaults,user 0 0 /dev/sde1 /mnt/usb/camera auto defaults,user 0 0 This worked well & good. I was happy to be able to mount the partitions as a user. Note that the linux partition has a label "usblinux". Then, I moved the drive to my work machine. **** Work I plugged the drive in and was surprised to find that both partitions automatically mounted in /media: /media/usbdisk /media/usblinux I also saw that entries were added to /etc/fstab, reflecting the mount points and device names. I recognized this as better action. Returning home... **** Home Plugging the drive in, I confirmed that nothing was happening in /media. I found the entry to automount the drive in: Preferences -> Removable Storage and enabled it. I unplugged and plugged the drive, and it mounted with this from df: Filesystem 1K-blocks Used Available Use% Mounted on <snip> /dev/sde1 72801276 1704196 67398920 3% /mnt/usb/camera /dev/sde2 4176756 96 4176660 1% /mnt/usb/windows This is not what I wanted. It used my fstab entries, and it picked the "camera" entry over the labeled entry. OK, so I deleted the fstab entries & tried again. This time nothing mounted. **** What I'd like to happen. 1. Mount when plugged in. 2. Don't specify the device -- after all, some other (new) usb device could disturb the device name. How do I get there? TIA, Bill