Hmm... My first thought was a bad drive, but you've got two hard drives and a CD-ROM drive on the SCSI bus, and you can't boot off any of them, right? I'll guess that either the SCSI bus is improperly terminated, or you have a bad cable...maybe a broken pin. -- Rich
-----Original Message----- From: wlug-bounces@mail.wlug.org [mailto:wlug-bounces@mail.wlug.org] On Behalf Of ken jones Sent: Wednesday, April 04, 2007 3:06 PM To: WLUG Subject: [Wlug] My bootless ULTRA1
WLUGers-
Remember the SUN ULTRA1 that I recently acquired? It does not boot from disk and it does not boot from CD drive. I have a complete Aurora Linux .iso disk set available.
Here is the complete (unsuccessful) powerup/boot process. Any good information in it? Is the machine worth saving? What needs to be swapped out?
Ken Jones
---------------------------------------------------
Sun Ultra 1 UPA/SBus (UltraSPARC 200MHz), No Keyboard OpenBoot 3.11, 192 MB memory installed, Serial #9633364. Ethernet address 8:0:20:92:fe:54, Host ID: 8092fe54.
Boot device: disk File and args: SILO boot:
Remapping the kernel... done. Booting Linux... PROMLIB: Sun IEEE Boot Prom 3.11.1 1997/12/03 15:53 Linux version 2.4.24-sparc-r1 (root@gentoo) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 @PV@)) #3 SMP Mon Feb 16 08:46:12 EST 2004 ARCH: SUN4U Ethernet address: 08:00:20:92:fe:54 On node 0 totalpages: 24017 zone(0): 73636 pages. zone(1): 0 pages. zone(2): 0 pages. Found CPU 0 (node=f006498c,mid=0) Found 1 CPU prom device tree node(s). Kernel command line: root=/dev/sda4 Calibrating delay loop... 398.95 BogoMIPS Memory: 185176k available (2368k kernel code, 368k data, 160k init) [fffff800000 00000,0000000023f48000] Dentry cache hash table entries: 32768 (order: 6, 524288 bytes) Inode cache hash table entries: 16384 (order: 5, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 8192 bytes) Buffer cache hash table entries: 8192 (order: 3, 65536 bytes) Page-cache hash table entries: 32768 (order: 5, 262144 bytes) POSIX conformance testing by UNIFIX Entering UltraSMPenguin Mode... Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: Probing for controllers. SYSIO: UPA portID 1f, at 000001fe00000000 sbus0: Clock 25.0 MHz dma0: HME DVMA gate array Sparc Zilog8530 serial driver version 1.68.2.2 Sun Mouse-Systems mouse driver version 1.00 tty00 at 0xf1100004 (irq = 12,7e8) is a Zilog8530 tty01 at 0xf1100000 (irq = 12,7e8) is a Zilog8530 tty02 at 0xf1000004 (irq = 12,7e8) is a Zilog8530 tty03 at 0xf1000000 (irq = 12,7e8) is a Zilog8530 keyboard: not present Console: ttyS0 (Zilog8530) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured rtc_init: no PC rtc found Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 SCSI subsystem driver Revision: 1.00 esp0: IRQ 4,7e0 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use. scsi0 : Sparc ESP366-HME Vendor: IBM Model: DDRS34560SUN4.2G Rev: S98E Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST32171W SUN2.1G Rev: 7462 Type: Direct-Access ANSI SCSI revision: 02 Vendor: TOSHIBA Model: XM-5401TASUN4XCD Rev: 2565 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 esp0: target 0 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II] SCSI device sda: 8385121 512-byte hdwr sectors (4293 MB) Partition check: /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4 esp0: target 1 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II] SCSI device sdb: 4157201 512-byte hdwr sectors (2128 MB) /dev/scsi/host0/bus0/target1/lun0: p1 p3 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 esp0: target 6 asynchronous sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 Linux video capture interface: v1.00 mice: PS/2 mouse device common for all mice Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device sd(8,4)) ... for (sd(8,4)) is_tree_node: node level 25728 does not match to the expected one 65534 sd(8,4):vs-5150: search_by_key: invalid format found in block 0. Fsck? sd(8,4):vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [1 2 0x0 SD] sd(8,4):Using r5 hash to sort names VFS: Cannot open root device "sda4" or 08:04 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 08:04 Press L1-A to return to the boot prom
participants (2)
-
ken jones
-
Klein, Richard