doug> Ran into this out of the blue, and wanted to share the joy (if you like attempting to understand the gore of PC hardware.... or figure out what you just plugged in, or assembled,etc. Sample output below! I havent even studied the args/options yet. Sections I "asked for" (the options/args I used.. "inxi -Fxz" , gave me....) System,Machine,CPU,Graphics,Audio,Network,Drives,Partition,Sensors,Info. I like how it reports disk (3 below) info, with per-disk temperature! Except on an SSD on another machine, temp.=0C I like how it reports per-disk temperature! Except on an SSD, I got temp.=0C sections I asked for with : Drives: HDD Total Size: 250.1GB (5.1% used) ID-1: /dev/sda model: Samsung_SSD_860 size: 250.1GB temp: 0C pardon the TMI/detail+long_lines below. -doug *Inix* is available in most mainstream Linux distribution repositories, and runs on BSDs as well. $ sudo apt-get install inxi [On *Debian/Ubuntu/Linux Mint*] $ sudo yum install inxi [On *CentOs/RHEL/Fedora*] $ sudo dnf install inxi [On *Fedora 22+*] $ inxi -Fxz
System: Host: P5Q Kernel: 3.10.0-862.14.4.el7.x86_64 x86_64 bits: 64 compiler: gcc v: 4.8.5 Console: tty 1 Distro: CentOS Linux release 7.5.1804 (Core) Machine: Type: Desktop Mobo: ASUSTeK model: P5Q-PRO v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 2102 date: 02/23/2009 CPU: Topology: Dual Core model: Intel Core2 Duo E8400 bits: 64 type: MCP arch: Penryn rev: A L2 cache: 6144 KiB flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 11997 Speed: 2003 MHz min/max: 2003/3003 MHz Core speeds (MHz): 1: 2003 2: 2003 Graphics: Device-1: Advanced Micro Devices [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT] driver: radeon v: kernel bus ID: 01:00.0 Display: server: X.org 1.19.5 driver: ati,radeon unloaded: fbdev,modesetting,vesa tty: 134x42 Message: Advanced graphics data unavailable in console. Try -G --display Audio: Device-1: VIA VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio driver: snd_ice1724 v: kernel bus ID: 05:00.0 Sound Server: ALSA v: k3.10.0-862.14.4.el7.x86_64 Network: Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet driver: ATL1E v: N/A port: bc00 bus ID: 02:00.0 IF: enp2s0 state: down mac: <filter> Device-2: Intel 82541PI Gigabit Ethernet driver: e1000 v: 7.3.21-k8-NAPI port: ec00 bus ID: 07:01.0 IF: enp7s1 state: up speed: 1000 Mbps duplex: full mac: <filter> IF-ID-1: virbr0 state: down mac: <filter> IF-ID-2: virbr0-nic state: down mac: <filter> Drives: Local Storage: total: 1.41 TiB used: 398.89 GiB (27.6%) ID-1: /dev/sda vendor: Hitachi model: HDS724040KLSA80 size: 372.61 GiB temp: 39 C ID-2: /dev/sdb vendor: Western Digital model: WD7500AACS-65D6B0 size: 698.64 GiB temp: 35 C ID-3: /dev/sdc vendor: Hitachi model: HDS724040KLSA80 size: 372.61 GiB temp: 42 C Partition: ID-1: / size: 64.04 GiB used: 9.41 GiB (14.7%) fs: ext4 dev: /dev/sdb1 Sensors: System Temperatures: cpu: 31.0 C mobo: N/A gpu: radeon temp: 43 C Fan Speeds (RPM): N/A Info: Processes: 196 Uptime: 11h 09m Memory: 1.79 GiB used: 896.5 MiB (48.8%) Init: systemd runlevel: 5 Compilers: gcc: N/A Shell: bash v: 4.2.46 inxi: 3.0.26
That is pretty nifty, thanks. It's such a PITA trying to pull all that info when I want to inventory systems, this does a lot! I can also imagine it would be a pretty useful tool for nefarious types fishing around for hardware to steal. Mike On Mon, Dec 17, 2018 at 11:21 PM Doug Mildram via WLUG <wlug@lists.wlug.org> wrote:
doug> Ran into this out of the blue, and wanted to share the joy (if you like attempting to understand the gore of PC hardware.... or figure out what you just plugged in, or assembled,etc. Sample output below! I havent even studied the args/options yet. Sections I "asked for" (the options/args I used.. "inxi -Fxz" , gave me....) System,Machine,CPU,Graphics,Audio,Network,Drives,Partition,Sensors,Info.
I like how it reports disk (3 below) info, with per-disk temperature! Except on an SSD on another machine, temp.=0C
I like how it reports per-disk temperature! Except on an SSD, I got temp.=0C sections I asked for with :
Drives: HDD Total Size: 250.1GB (5.1% used) ID-1: /dev/sda model: Samsung_SSD_860 size: 250.1GB temp: 0C
pardon the TMI/detail+long_lines below. -doug
*Inix* is available in most mainstream Linux distribution repositories, and runs on BSDs as well.
$ sudo apt-get install inxi [On *Debian/Ubuntu/Linux Mint*] $ sudo yum install inxi [On *CentOs/RHEL/Fedora*] $ sudo dnf install inxi [On *Fedora 22+*]
$ inxi -Fxz
System: Host: P5Q Kernel: 3.10.0-862.14.4.el7.x86_64 x86_64 bits: 64 compiler: gcc v: 4.8.5 Console: tty 1 Distro: CentOS Linux release 7.5.1804 (Core) Machine: Type: Desktop Mobo: ASUSTeK model: P5Q-PRO v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 2102 date: 02/23/2009 CPU: Topology: Dual Core model: Intel Core2 Duo E8400 bits: 64 type: MCP arch: Penryn rev: A L2 cache: 6144 KiB flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 11997 Speed: 2003 MHz min/max: 2003/3003 MHz Core speeds (MHz): 1: 2003 2: 2003 Graphics: Device-1: Advanced Micro Devices [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT] driver: radeon v: kernel bus ID: 01:00.0 Display: server: X.org 1.19.5 driver: ati,radeon unloaded: fbdev,modesetting,vesa tty: 134x42 Message: Advanced graphics data unavailable in console. Try -G --display Audio: Device-1: VIA VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio driver: snd_ice1724 v: kernel bus ID: 05:00.0 Sound Server: ALSA v: k3.10.0-862.14.4.el7.x86_64 Network: Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet driver: ATL1E v: N/A port: bc00 bus ID: 02:00.0 IF: enp2s0 state: down mac: <filter> Device-2: Intel 82541PI Gigabit Ethernet driver: e1000 v: 7.3.21-k8-NAPI port: ec00 bus ID: 07:01.0 IF: enp7s1 state: up speed: 1000 Mbps duplex: full mac: <filter> IF-ID-1: virbr0 state: down mac: <filter> IF-ID-2: virbr0-nic state: down mac: <filter> Drives: Local Storage: total: 1.41 TiB used: 398.89 GiB (27.6%) ID-1: /dev/sda vendor: Hitachi model: HDS724040KLSA80 size: 372.61 GiB temp: 39 C ID-2: /dev/sdb vendor: Western Digital model: WD7500AACS-65D6B0 size: 698.64 GiB temp: 35 C ID-3: /dev/sdc vendor: Hitachi model: HDS724040KLSA80 size: 372.61 GiB temp: 42 C Partition: ID-1: / size: 64.04 GiB used: 9.41 GiB (14.7%) fs: ext4 dev: /dev/sdb1 Sensors: System Temperatures: cpu: 31.0 C mobo: N/A gpu: radeon temp: 43 C Fan Speeds (RPM): N/A Info: Processes: 196 Uptime: 11h 09m Memory: 1.79 GiB used: 896.5 MiB (48.8%) Init: systemd runlevel: 5 Compilers: gcc: N/A Shell: bash v: 4.2.46 inxi: 3.0.26
_______________________________________________ WLUG mailing list -- wlug@lists.wlug.org To unsubscribe send an email to wlug-leave@lists.wlug.org
I noticed that the fan speed was zero. I had the same result on mt Mint machine. To fix this I had to run sensors-detect (part of lm sensors?) to update /etc/modules with the correct driver(s) and reboot. Hopefully, GKrellM or ones preferred hardware monitoring GUI will work with fan speed now. Just adding my 2 cents worth. On 12/17/18 11:21 PM, Doug Mildram via WLUG wrote:
doug> Ran into this out of the blue, and wanted to share the joy (if you like attempting to understand the gore of PC hardware.... or figure out what you just plugged in, or assembled,etc. Sample output below! I havent even studied the args/options yet. Sections I "asked for" (the options/args I used.. "inxi -Fxz" , gave me....) System,Machine,CPU,Graphics,Audio,Network,Drives,Partition,Sensors,Info.
I like how it reports disk (3 below) info, with per-disk temperature! Except on an SSD on another machine, temp.=0C
I like how it reports per-disk temperature! Except on an SSD, I got temp.=0C sections I asked for with :
Drives: HDD Total Size: 250.1GB (5.1% used) ID-1: /dev/sda model: Samsung_SSD_860 size: 250.1GB temp: 0C
pardon the TMI/detail+long_lines below. -doug
*Inix* is available in most mainstream Linux distribution repositories, and runs on BSDs as well.
$ sudo apt-get install inxi [On*Debian/Ubuntu/Linux Mint*] $ sudo yum install inxi [On*CentOs/RHEL/Fedora*] $ sudo dnf install inxi [On*Fedora 22+*] $ inxi -Fxz
System: Host: P5Q Kernel: 3.10.0-862.14.4.el7.x86_64 x86_64 bits: 64 compiler: gcc v: 4.8.5 Console: tty 1 Distro: CentOS Linux release 7.5.1804 (Core) Machine: Type: Desktop Mobo: ASUSTeK model: P5Q-PRO v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 2102 date: 02/23/2009 CPU: Topology: Dual Core model: Intel Core2 Duo E8400 bits: 64 type: MCP arch: Penryn rev: A L2 cache: 6144 KiB flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 11997 Speed: 2003 MHz min/max: 2003/3003 MHz Core speeds (MHz): 1: 2003 2: 2003 Graphics: Device-1: Advanced Micro Devices [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT] driver: radeon v: kernel bus ID: 01:00.0 Display: server: X.org 1.19.5 driver: ati,radeon unloaded: fbdev,modesetting,vesa tty: 134x42 Message: Advanced graphics data unavailable in console. Try -G --display Audio: Device-1: VIA VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio driver: snd_ice1724 v: kernel bus ID: 05:00.0 Sound Server: ALSA v: k3.10.0-862.14.4.el7.x86_64 Network: Device-1: Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet driver: ATL1E v: N/A port: bc00 bus ID: 02:00.0 IF: enp2s0 state: down mac: <filter> Device-2: Intel 82541PI Gigabit Ethernet driver: e1000 v: 7.3.21-k8-NAPI port: ec00 bus ID: 07:01.0 IF: enp7s1 state: up speed: 1000 Mbps duplex: full mac: <filter> IF-ID-1: virbr0 state: down mac: <filter> IF-ID-2: virbr0-nic state: down mac: <filter> Drives: Local Storage: total: 1.41 TiB used: 398.89 GiB (27.6%) ID-1: /dev/sda vendor: Hitachi model: HDS724040KLSA80 size: 372.61 GiB temp: 39 C ID-2: /dev/sdb vendor: Western Digital model: WD7500AACS-65D6B0 size: 698.64 GiB temp: 35 C ID-3: /dev/sdc vendor: Hitachi model: HDS724040KLSA80 size: 372.61 GiB temp: 42 C Partition: ID-1: / size: 64.04 GiB used: 9.41 GiB (14.7%) fs: ext4 dev: /dev/sdb1 Sensors: System Temperatures: cpu: 31.0 C mobo: N/A gpu: radeon temp: 43 C Fan Speeds (RPM): N/A Info: Processes: 196 Uptime: 11h 09m Memory: 1.79 GiB used: 896.5 MiB (48.8%) Init: systemd runlevel: 5 Compilers: gcc: N/A Shell: bash v: 4.2.46 inxi: 3.0.26
_______________________________________________ WLUG mailing list -- wlug@lists.wlug.org To unsubscribe send an email to wlug-leave@lists.wlug.org
I am considering getting a desktop document reader/scanner for my linux desktop. I am hoping to do all of the following with the camera. 1) scan documents or book pages for OCR. From what I can determine 8MP is desirable for this. 2) view close ups large enough to inspect the solder (or at least the presence of) on fine pitch devices. (Electronics) 3) Use it as a web cam. I suspect my desktop is powerful enough to read the camera at the 30FPS, does webcam software in linux reduce the image enough quality for skype to work with a SLOW broadband connection? I am asking for opinions/suggestions. Here are the links to the two I am considering. https://www.amazon.com/IPEVO-Definition-Document-Camera-5-880-4-01-00/dp/B07... And its more expensive cousin, even if it is too expensive for my budget. I HATE buying things twice. https://www.amazon.com/Ipevo-5-883-4-01-00-VZ-R-Document-Camera/dp/B0784RZNK...
participants (3)
-
Doug Mildram -
Kevin W Stratton -
Mike Peckar