RE: [Wlug] RedHat 9 Network Problem
Include your /etc/sysconfig/network-scripts/ifcfg-eth0 and your /etc/sysconfig/network files in an email so we can see what they look
I haven't worked with RH for a while, bu you have both dhcp and a hardcoded address here. Also, there's your problem, if I'm reading this right. You're set to 192.168.0.2 with a 255.255.255.0 mask. That means you can only see 192.168.0.x machines, and your router is 192.168.1.x, right? -----Original Message----- From: Joel J. Young [mailto:joel@jyng.com] Sent: Wednesday, March 31, 2004 10:26 PM To: Wlug@mail.wlug.org Subject: [Wlug] RedHat 9 Network Problem Here are the requested files: Ifcfg-eth0: # Lite-On|LNE100TX DEVICE=eth0 ONBOOT=yes ** BOOTPROTO=dhcp ** HWADDR=FF:FF:FF:FF:FF:FF USERCTL=no PEERDNS=yes TYPE=Ethernet ** NETMASK=255.255.255.0 ** IPADDR=192.168.0.2 GATEWAY=192.168.0.1 Modules.conf: alias usb-controller usb-uhci alias sound-slot-0 emu10k1 post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : alias eth0 tulip network: NETWORKING=yes HOSTNAME= Output of /sbin/lspci -vv - Non network devices removed to pass 40k post filter 00:0d.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20) Subsystem: Lite-On Communications Inc LNE100TX Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 32 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 8800 [disabled] [size=256] Region 1: Memory at d5800000 (32-bit, non-prefetchable) [disabled] [size=256] Expansion ROM at <unassigned> [disabled] [size=256K] ...... -----Original Message----- From: wlug-bounces@mail.wlug.org [mailto:wlug-bounces@mail.wlug.org <mailto:wlug-bounces@mail.wlug.org> ] On Behalf Of Charles R. Anderson Sent: Tuesday, March 30, 2004 10:21 AM To: Worcester Linux Users Group Subject: Re: [Wlug] RedHat 9 Network Problem On Tue, Mar 30, 2004 at 10:13:15AM -0500, Dwight A. Ernest wrote: like. Also include /etc/modules.conf and the Ethernet card entry from the "/sbin/lspci -vv" output. _______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug <http://mail.wlug.org/mailman/listinfo/wlug>
/dev/null 2>&1 || :
I tried using both static and dynamic IPs. Neigther worked. It's possible there's remnants of that testing left. Everything on my local network is in the 192.168.0.x address space. No, I changed the address of the router back to the default, which is 192.168.0.1 -----Original Message----- From: wlug-bounces@mail.wlug.org [mailto:wlug-bounces@mail.wlug.org] On Behalf Of Martin, Eric Sent: Thursday, April 01, 2004 8:47 AM To: 'Worcester Linux Users Group' Subject: RE: [Wlug] RedHat 9 Network Problem I haven't worked with RH for a while, bu you have both dhcp and a hardcoded address here. Also, there's your problem, if I'm reading this right. You're set to 192.168.0.2 with a 255.255.255.0 mask. That means you can only see 192.168.0.x machines, and your router is 192.168.1.x, right? -----Original Message----- From: Joel J. Young [mailto:joel@jyng.com] Sent: Wednesday, March 31, 2004 10:26 PM To: Wlug@mail.wlug.org Subject: [Wlug] RedHat 9 Network Problem Here are the requested files: Ifcfg-eth0: # Lite-On|LNE100TX DEVICE=eth0 ONBOOT=yes ** BOOTPROTO=dhcp ** HWADDR=FF:FF:FF:FF:FF:FF USERCTL=no PEERDNS=yes TYPE=Ethernet ** NETMASK=255.255.255.0 ** IPADDR=192.168.0.2 GATEWAY=192.168.0.1 Modules.conf: alias usb-controller usb-uhci alias sound-slot-0 emu10k1 post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
/dev/null 2>&1 || : alias eth0 tulip
Include your /etc/sysconfig/network-scripts/ifcfg-eth0 and your /etc/sysconfig/network files in an email so we can see what they look
network: NETWORKING=yes HOSTNAME= Output of /sbin/lspci -vv - Non network devices removed to pass 40k post filter 00:0d.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20) Subsystem: Lite-On Communications Inc LNE100TX Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 32 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at 8800 [disabled] [size=256] Region 1: Memory at d5800000 (32-bit, non-prefetchable) [disabled] [size=256] Expansion ROM at <unassigned> [disabled] [size=256K] ...... -----Original Message----- From: wlug-bounces@mail.wlug.org [mailto:wlug-bounces@mail.wlug.org] On Behalf Of Charles R. Anderson Sent: Tuesday, March 30, 2004 10:21 AM To: Worcester Linux Users Group Subject: Re: [Wlug] RedHat 9 Network Problem On Tue, Mar 30, 2004 at 10:13:15AM -0500, Dwight A. Ernest wrote: like. Also include /etc/modules.conf and the Ethernet card entry from the "/sbin/lspci -vv" output. _______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
participants (2)
-
Joel J. Young -
Martin, Eric