Hi, When uptime reaches around three days, somehow a weird situation is happening. X usage suddenly jumps around 99% freezing the X environment. X seems to have frozen, but I can move the mouse pointer. Nothing else can be done. I log on to this machine from another one on the local area network using ssh, and reboot it for a temporary solution. If I restart only the X server, I believe it doesn't take that long to have the problem again. a total reboot gives me another 2-3 days. as soon as it freezes, connecting to this machine from the other one, I tried looking at the log files under /var/log several times. no entry has been added to xfree log in the last 10-15 minutes. and the files which have been modified in 15 minutes does not have any entries relating to the situaion, at least to my knowledge. suspecting the ram of this partially new system, I checked my rams with memtest-86-3.0. no problems are reported. suspecting the gdm, I tried without it as well. problem regenerates as usual. I don't know whether it is related but, another strange issue I am having is that: with or without gdm, sometime(not soon) after X login "alt" key starts not functioning. for example, alt+shift cannot change the keyboard layout or ctrl+alt+f{1-6} cannot take me to the consol and of course I cannot kill the X server using ctrl+alt+backspace. motherboard: Asus A7N8X cpu: AMD Athlon 2500+ video card: creative tnt2ultra 2X video driver: nvidia distro: slackware 9.0 ram: 512MB swap: 256MB Do you have any ideas? where would you think I should start from? thank you, baris
I get X lockups, too. But when it happens, nothing works. No mouse, no keys, and I don't think I get increased cpu load. Only pressing the reset button works. I'm pretty sure it's due to a flaky power supply that puts out low voltages sometimes, and has on occasion rebooted itself for no apparent reason. I'll know for sure in about a week, when the new one arrives. Greg Baris Hasdemir wrote:
Hi,
When uptime reaches around three days, somehow a weird situation is happening. X usage suddenly jumps around 99% freezing the X environment. X seems to have frozen, but I can move the mouse pointer. Nothing else can be done.
I log on to this machine from another one on the local area network using ssh, and reboot it for a temporary solution. If I restart only the X server, I believe it doesn't take that long to have the problem again. a total reboot gives me another 2-3 days.
as soon as it freezes, connecting to this machine from the other one, I tried looking at the log files under /var/log several times. no entry has been added to xfree log in the last 10-15 minutes. and the files which have been modified in 15 minutes does not have any entries relating to the situaion, at least to my knowledge.
suspecting the ram of this partially new system, I checked my rams with memtest-86-3.0. no problems are reported.
suspecting the gdm, I tried without it as well. problem regenerates as usual.
I don't know whether it is related but, another strange issue I am having is that: with or without gdm, sometime(not soon) after X login "alt" key starts not functioning. for example, alt+shift cannot change the keyboard layout or ctrl+alt+f{1-6} cannot take me to the consol and of course I cannot kill the X server using ctrl+alt+backspace.
motherboard: Asus A7N8X cpu: AMD Athlon 2500+ video card: creative tnt2ultra 2X video driver: nvidia distro: slackware 9.0 ram: 512MB swap: 256MB
Do you have any ideas? where would you think I should start from?
thank you, baris
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
Have you tried swapping the keyboard? Perhaps you have a flaky alt key which eventually floods the Xserver with interrupts. -Adam On Sunday, July 27, 2003, at 03:27 PM, Baris Hasdemir wrote:
Hi,
When uptime reaches around three days, somehow a weird situation is happening. X usage suddenly jumps around 99% freezing the X environment. X seems to have frozen, but I can move the mouse pointer. Nothing else can be done.
I log on to this machine from another one on the local area network using ssh, and reboot it for a temporary solution. If I restart only the X server, I believe it doesn't take that long to have the problem again. a total reboot gives me another 2-3 days.
as soon as it freezes, connecting to this machine from the other one, I tried looking at the log files under /var/log several times. no entry has been added to xfree log in the last 10-15 minutes. and the files which have been modified in 15 minutes does not have any entries relating to the situaion, at least to my knowledge.
suspecting the ram of this partially new system, I checked my rams with memtest-86-3.0. no problems are reported.
suspecting the gdm, I tried without it as well. problem regenerates as usual.
I don't know whether it is related but, another strange issue I am having is that: with or without gdm, sometime(not soon) after X login "alt" key starts not functioning. for example, alt+shift cannot change the keyboard layout or ctrl+alt+f{1-6} cannot take me to the consol and of course I cannot kill the X server using ctrl+alt+backspace.
motherboard: Asus A7N8X cpu: AMD Athlon 2500+ video card: creative tnt2ultra 2X video driver: nvidia distro: slackware 9.0 ram: 512MB swap: 256MB
Do you have any ideas? where would you think I should start from?
thank you, baris
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
Adam Keck wrote:
Have you tried swapping the keyboard? Perhaps you have a flaky alt key which eventually floods the Xserver with interrupts.
last week a whole glass of soda was spilled over my old keyboard ending with 4 dead keys. so I replaced it with a new keyboard. I don't think it's the keyboard. I had the problem then(before the spillage), and I still have it now. baris
Gregory Avedissian wrote:
I get X lockups, too. But when it happens, nothing works. No mouse, no keys, and I don't think I get increased cpu load. Only pressing the reset button works. I'm pretty sure it's due to a flaky power supply that puts out low voltages sometimes, and has on occasion rebooted itself for no apparent reason. I'll know for sure in about a week, when the new one arrives.
let me tell some more about the frozen state. when this strange thing happens I absolutely can move the mouse pointer. but nothing reacts when moved over, or clicked on. more, when connected from another machine thorugh ssh, even if I kill the application shown on the screen, although the application is killed. (even not in Z state) it is still shown on screen as if nothing has happened. it is more like a screenshot taken before the freeze. it seems like driver problem? would you think so? thanks, baris
I've had x lockups before in the past. Only thing that has solved it was upgrading X to the latest and having a driver fixup fix the bug. I could ssh in from another box and kill -9 the X process. Are you running the latest version of X? www.free86.org On Sun, 27 Jul 2003, Baris Hasdemir wrote:
Gregory Avedissian wrote:
I get X lockups, too. But when it happens, nothing works. No mouse, no keys, and I don't think I get increased cpu load. Only pressing the reset button works. I'm pretty sure it's due to a flaky power supply that puts out low voltages sometimes, and has on occasion rebooted itself for no apparent reason. I'll know for sure in about a week, when the new one arrives.
let me tell some more about the frozen state. when this strange thing happens I absolutely can move the mouse pointer. but nothing reacts when moved over, or clicked on.
more, when connected from another machine thorugh ssh, even if I kill the application shown on the screen, although the application is killed. (even not in Z state) it is still shown on screen as if nothing has happened. it is more like a screenshot taken before the freeze.
it seems like driver problem? would you think so?
thanks, baris
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
--
¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º°`°º¤ø
Karl Hiramoto
Karl Hiramoto wrote:
I've had x lockups before in the past. Only thing that has solved it was upgrading X to the latest and having a driver fixup fix the bug.
I could ssh in from another box and kill -9 the X process.
Are you running the latest version of X?
unfortunately yes. penguen@penguen:~$ XFree86 -version XFree86 Version 4.3.0 Release Date: 27 February 2003 ...
Karl Hiramoto wrote:
I've had x lockups before in the past. Only thing that has solved it was upgrading X to the latest and having a driver fixup fix the bug.
I could ssh in from another box and kill -9 the X process.
Are you running the latest version of X?
unfortunately yes. penguen@penguen:~$ XFree86 -version XFree86 Version 4.3.0 Release Date: 27 February 2003 ...
Baris> When uptime reaches around three days, somehow a weird Baris> situation is happening. X usage suddenly jumps around 99% Baris> freezing the X environment. X seems to have frozen, but I can Baris> move the mouse pointer. Nothing else can be done. Baris> video card: creative tnt2ultra 2X Baris> video driver: nvidia I'd try getting rid of the Nvidia module and making sure that X works just fine without it. Sure you won't have acceleration, but you're looking for stability first, right? I'd also check and see if you have the correct kernel version for the nvidia driver your using. Any messages in the logs? Look in /var/log/messages, and think about turning on more verbose X logging. I can't find the file(s) to tweak in a quick search though. John
participants (6)
-
Adam Keck -
Baris Hasdemir -
Baris Hasdemir -
Gregory Avedissian -
John Stoffel -
Karl Hiramoto