hi all, I am trying to configure cups 1.1.14 on slackware 8 to print on a printer connected to the router(siemens speedstream 2614). Unfortunately, I couldn't manage to print even a garbage. what should I use? ipp:// or socket:// or lpd:// or what? and how? device options on cups: -------------------------- AppSocket/HP JetDirect Internet Printing Protocol(http) Internet Printing Protocol(ipp) LPD/LPR Host or Printer Parallel Port Serial Port#1 to #32 device url options ise sunlar: ---------------------------------- Examples: file:/path/to/filename.prn http://hostname:631/ipp/ http://hostname:631/ipp/port1 ipp://hostname/ipp/ ipp://hostname/ipp/port1 lpd://hostname/queue socket://hostname socket://hostname:9100 a port scan on the router produces Port State Service 80/tcp open http 88/tcp open kerberos-sec 515/tcp open printer any help perfectly welcome thanks, baris
Well, that's a good question. It's a router with a printer port, or a networked printer "naturally"). Either way, cups should be able to see any printer on the the network. I'm thinking that printing directly to a network socket would work, at least tha't what I did with networked printers where I used to work. My sugguestion is this, and I know is a total cop-out, get KUPS and do a network scan to look for printers. If it's on the network. Cups should be seeing it. Wes On Fri, 2002-03-15 at 15:04, Baris Hasdemir wrote:
hi all,
I am trying to configure cups 1.1.14 on slackware 8 to print on a printer connected to the router(siemens speedstream 2614). Unfortunately, I couldn't manage to print even a garbage.
what should I use? ipp:// or socket:// or lpd:// or what? and how?
device options on cups: -------------------------- AppSocket/HP JetDirect Internet Printing Protocol(http) Internet Printing Protocol(ipp) LPD/LPR Host or Printer Parallel Port Serial Port#1 to #32
device url options ise sunlar: ---------------------------------- Examples:
file:/path/to/filename.prn http://hostname:631/ipp/ http://hostname:631/ipp/port1 ipp://hostname/ipp/ ipp://hostname/ipp/port1 lpd://hostname/queue socket://hostname socket://hostname:9100
a port scan on the router produces Port State Service 80/tcp open http 88/tcp open kerberos-sec 515/tcp open printer
any help perfectly welcome
thanks, baris _______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
thanks for the reply. yes router has a printer port on it. I just compiled kups, selected socket, and did a network scan(192.168.254.0-192.168.254.255 on port 515). kups did find one on 192.168.254.254 which is the router. then I selected the printer configuration. But still does not print a test page? any ideas? baris On 15 Mar 2002 15:12:29 -0500 Wesley Allen <wallen@charter.net> wrote:
Well, that's a good question. It's a router with a printer port, or a networked printer "naturally").
Either way, cups should be able to see any printer on the the network. I'm thinking that printing directly to a network socket would work, at least tha't what I did with networked printers where I used to work. My sugguestion is this, and I know is a total cop-out, get KUPS and do a network scan to look for printers. If it's on the network. Cups should be seeing it.
Wes
On Fri, 2002-03-15 at 15:04, Baris Hasdemir wrote:
hi all,
I am trying to configure cups 1.1.14 on slackware 8 to print on a printer connected to the router(siemens speedstream 2614). Unfortunately, I couldn't manage to print even a garbage.
what should I use? ipp:// or socket:// or lpd:// or what? and how?
device options on cups: -------------------------- AppSocket/HP JetDirect Internet Printing Protocol(http) Internet Printing Protocol(ipp) LPD/LPR Host or Printer Parallel Port Serial Port#1 to #32
device url options ise sunlar: ---------------------------------- Examples:
file:/path/to/filename.prn http://hostname:631/ipp/ http://hostname:631/ipp/port1 ipp://hostname/ipp/ ipp://hostname/ipp/port1 lpd://hostname/queue socket://hostname socket://hostname:9100
a port scan on the router produces Port State Service 80/tcp open http 88/tcp open kerberos-sec 515/tcp open printer
any help perfectly welcome
thanks, baris
Hi Baris Hasdemir wrote:
I am trying to configure cups 1.1.14 on slackware 8 to print on a printer connected to the router(siemens speedstream 2614). Unfortunately, I couldn't manage to print even a garbage.
what should I use? ipp:// or socket:// or lpd:// or what? and how?
I have a laserjet IIP connected to the first port/queue "L1" of a standalone Linksys printserver (Model EPSX3). In my /etc/hosts file I have a line 192.168.7.55 printserver.localdomain printserver In my /etc/cups/printers.conf file I have </Printer> <DefaultPrinter lp> Info lj2p Location DeviceURI lpd://printserver/L1 State Idle Accepting Yes JobSheets </Printer> In that fifth line, printserver refers to that dotted quad defined in /etc/hosts. The lpd: would appear to me to tell you what cups likes to see. I suspect you should then be able to replace the //printserver by the equivalent for your router. (That L1 is just how that linksys box distinguishes the first printer queue from the other two.) doug
Hi, there's a error_log, and access_log, (probably in /var/log/cups/). That might lead to a solution. If you want to get more info out of the logs you can change the vebosity in cups.conf. When i configured cups, i just used the web interface, and that worked very well, perhaps that might be worth looking at (http://printer_server:631/). On Fri, Mar 15, 2002 at 04:53:39PM -0500, Baris Hasdemir wrote:
thanks for the reply. yes router has a printer port on it. I just compiled kups, selected socket, and did a network scan(192.168.254.0-192.168.254.255 on port 515). kups did find one on 192.168.254.254 which is the router. then I selected the printer configuration.
But still does not print a test page? any ideas?
baris
On 15 Mar 2002 15:12:29 -0500 Wesley Allen <wallen@charter.net> wrote:
Well, that's a good question. It's a router with a printer port, or a networked printer "naturally").
Either way, cups should be able to see any printer on the the network. I'm thinking that printing directly to a network socket would work, at least tha't what I did with networked printers where I used to work. My sugguestion is this, and I know is a total cop-out, get KUPS and do a network scan to look for printers. If it's on the network. Cups should be seeing it.
Wes
On Fri, 2002-03-15 at 15:04, Baris Hasdemir wrote:
hi all,
I am trying to configure cups 1.1.14 on slackware 8 to print on a printer connected to the router(siemens speedstream 2614). Unfortunately, I couldn't manage to print even a garbage.
what should I use? ipp:// or socket:// or lpd:// or what? and how?
device options on cups: -------------------------- AppSocket/HP JetDirect Internet Printing Protocol(http) Internet Printing Protocol(ipp) LPD/LPR Host or Printer Parallel Port Serial Port#1 to #32
device url options ise sunlar: ---------------------------------- Examples:
file:/path/to/filename.prn http://hostname:631/ipp/ http://hostname:631/ipp/port1 ipp://hostname/ipp/ ipp://hostname/ipp/port1 lpd://hostname/queue socket://hostname socket://hostname:9100
a port scan on the router produces Port State Service 80/tcp open http 88/tcp open kerberos-sec 515/tcp open printer
any help perfectly welcome
thanks, baris
Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
I used this lpd://192.168.254.254/LPT1 the only trick is to find out the queue name which is not mentioned in the user's manual of speedstream. Siemens says their router IS compatible with unix however they do not support it. So I had to guess for it. Going after doug's example I tried couple of queue names like L1, queue, lp0, etc... could not succeed. I thought of examining the port driver software for dos. In the properties window of the port driver I saw that it is somehow using lpt1 port. then I realized that lpt1 should be the name of the printer port on the router. So tried to use LPT1 as the name of the queue. and it worked. thanks to all help! baris On Fri, 15 Mar 2002 15:04:05 -0500 Baris Hasdemir <tekir99@yahoo.com> wrote:
hi all,
I am trying to configure cups 1.1.14 on slackware 8 to print on a printer connected to the router(siemens speedstream 2614). Unfortunately, I couldn't manage to print even a garbage.
what should I use? ipp:// or socket:// or lpd:// or what? and how?
device options on cups: -------------------------- AppSocket/HP JetDirect Internet Printing Protocol(http) Internet Printing Protocol(ipp) LPD/LPR Host or Printer Parallel Port Serial Port#1 to #32
device url options ise sunlar: ---------------------------------- Examples:
file:/path/to/filename.prn http://hostname:631/ipp/ http://hostname:631/ipp/port1 ipp://hostname/ipp/ ipp://hostname/ipp/port1 lpd://hostname/queue socket://hostname socket://hostname:9100
a port scan on the router produces Port State Service 80/tcp open http 88/tcp open kerberos-sec 515/tcp open printer
any help perfectly welcome
thanks, baris
participants (4)
-
Baris Hasdemir -
Brad Noyes -
doug waud -
Wesley Allen