I know that the original question was based on a suse8.2 installation but I'm guessing this is the Linux 2.6 kernel bug that has been discussed at length in other places. Have you tried sfdisk? Details and a solution here : http://www.redhat.com/archives/fedora-devel-list/2004-May/msg00908.html Cheers. Jason. --- doug waud <douglas.waud@umassmed.edu> wrote:
Hi again
This time, let's try focussing on one thing to try.
I don't see that you have ever tried the standard way to restore the MBR for Windows --- boot a Windows floppy with fdisk on it and type fdisk /mbr and, if you still cannot boot windows, add a sys c:
It is not clear from here why you did not try this.
doug
doug waud wrote:
Hi again Greg
Gregory Avedissian wrote:
There were three backups of the mbr. One made under dos with debug.exe, and the others made with linux as,
dd if=/dev/hda of=/boot/boot.MBR bs=512 count=1 dd if=/dev/hda of=/boot/boot.446.MBR bs=446 count=1
I restored with:
dd if=/boot/boot.MBR of=/dev/hda bs=512 count=1 I think maybe I picked the wrong one.
I admit I would have used the second, safer (since it does not touch the partition table), but I don't see why the 512 bs variant would not have worked unless you had changed the partition table since making
boot.MBR file.
No, I didn't change the partition table. I made these backups within days of installing, so that I would have copies of a new, working mbr.
It is hard to tell what went wrong until you tell us what you
were
doing just before the system no longer would boot. (Those two
creating the boot.xyz files would only read from the first 512 or 446 bytes not do any writing there so they cannot be the cause of your troubles.)
Why don't you boot from a bootable floppy? Alternatively, start
SuSE recovery mechanism which includes "boot an installed system" as an option. If all that is screwed up it the MBR, you could then simply run LILO to refresh it.
I had a new win98 installation working ok, then I installed suse8.2 and set it up so that it would boot with GRUB from floppy. I don't recall if I ever tried to boot from the harddrive to get into windows after I installed suse, but I know I could get there from the floppy.
When I did try to boot off the hard drive two days ago, it hung with the message, "Disk boot failure. Insert system disk."
I could still boot to win or linux from the grub floppy at this
Gregory Avedissian wrote: that lines the point. I
tried restoring the mbr in dos with debug.exe, and that didn't help. I could still boot to linux with the floppy, and I can't remember if I could still boot to windows. Then I tried restoring with dd if=/boot/boot.MBR of=/dev/hda bs=512 count=1
After that, I couldn't boot from the grub floppy anymore. Trying to boot the installed system from the rescue disk also failed. I then booted to the rescue system. Output of sfdisk -l looked like this:
Disk /dev/hda: 3737 cylinders, 255 heads, 63 sectors/track /dev/hda: unrecognized partition No partitions found
Repeating the restore procedure with debug.exe didn't help, either.
Thanks, Greg
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
__________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail