Doug, Thanks for the info and the link. As it turns out, the personal version is missing about 120 packages out of what I have installed. I recognized about 30 of them, and the download time is prohibitive. I need to get the pro version on cd. Meanwhile, I really wanted to know if XFree 4.x would work with my card, so I took a spare hard drive and installed debian woody. I installed xfree 4.1 and had to add the 3DLabs driver from xf3.3.6. Apparentlly, there's software to make driver work with the new version, and it works well. I no longer get little squares and dashes instead of letters on some programs. Makes it much easier to figure out which buttons to click when you can read the words. I'd tried debian a couple months ago and was unhappy with the installation process. Someone on this list suggested installing just the base system and then using apt-get to install the other packages I wanted. That seems to work out very well with almost everything (not ALSA). The other reason I wanted to upgrade was to be able to run a newer version of mozilla with junk mail controls. I'm using 1.4, and the junk filters work pretty well. In fact, they work so well that I haven't wanted to boot suse to get my mail. That's part of the reason it's taken me so long to get back to you on this. Thanks again, Greg doug waud wrote:
Hi
Gregory Avedissian wrote:
I'm getting ready to upgrade from SuSE 7.2 to 8.1, and I have a little confusion and some questions.
I'm going from 7.2 pro edition to 8.1 personal edition. Any ideas what's missing in the personal edition?
Up to version 7 SuSE used to list this comparison right on the box. Your old 7.2 box should give a reasonably good idea of what the general differnces are. The URL will give the same for 9 http://www.suse.de/en/private/products/suse_linux/i386/packages.html I could not find the equivalent for 8.x :-(
Attempting to replace what is installed, I get a list of conflicts, with advice to delete the old program, even if they don't have a replacement. I was surprised to see that balsa and gftp were listed as not having newer versions. Is this because they're not on the personal edition? I know they exist, because they're available at rpmfind
I am running 8.2 on this notebook I am writing on now and locate comes up with both balsa and gftp (under Yast as uninstalled) so I suspect they are just not on the personal edition. Also the 9.0 URL above explicitly lists both in the professional and neither in the personal edition.
The real issue - XFree 4.x doesn't seem to want to recognize my ELSA GLoria-L video card. Sax2 will run in 640x480 only, and I can't get it to run with the glint driver (the one that's supposed to work with this card). I tried doing this with the SuSE 8.2 evaluation disk, and I'm running into the same problems I had when I tried to upgrade to XFree 4.1 about a month ago.
So here's the question - Can I upgrade to 8.1 without upgrading XFree? Better yet, if I upgrade the XFree, and it doesn't work, is there an easy way to return to the older version by using the CD's. Or do I have to manually back up /usr/X11R6 and /etc/X11 first, and then recopy them to get back to the older version? Will the rest of the SuSE 8.1 be pissed off about using XFree 3.3.6?
I am "underwhelmed" by Sax2's ability to get XFree right. I have just been upgrading my desktop to SuSE 8.2 and the screen was all screwed up. I finally went into /etc/X11/XF86Config and found that it seemed to think my 1Meg video memory (I'm the last of the big time spenders!} was 8 Meg. I just put a VideoRam 1024 in the Device section, dd'd a couple of 1280x1024 modes, defaulted to 8bit color depth, and X then ran fine.
I believe you always have the choice of running either 4.x or 3.x but confess I forget how you tell the beast which one to use. :-). I would be very suprised if you could not get 4.x to work, but if that really turns out to be the case, let me know and I'll root around and see if I can recall the trick for forcing ti to use 3.x.
I suppose I could change the vid card, but I'd rather not spend any money,
That's my sort of guy!
and since this one is listed as working, I'd like to be able to get it to work.
And, as indicated above, you should be able to.
doug
PS The WLUG meeting tonight is a good place to get help from real experts, for example, Andy Whatshisname, and others more knowledgable than I.
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug