Here
are the requested files:
Ifcfg-eth0:
# Lite-On|LNE100TX
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=dhcp
HWADDR=FF:FF:FF:FF:FF:FF
USERCTL=no
PEERDNS=yes
TYPE=Ethernet
NETMASK=255.255.255.0
IPADDR=192.168.0.2
GATEWAY=192.168.0.1
Modules.conf:
alias usb-controller
usb-uhci
alias sound-slot-0 emu10k1
post-install sound-slot-0 /bin/aumix-minimal
-f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal
-f /etc/.aumixrc -S >/dev/null 2>&1 || :
alias eth0 tulip
network:
NETWORKING=yes
HOSTNAME=
Output
of /sbin/lspci –vv - Non network devices removed to pass 40k
post filter
00:0d.0 Ethernet controller: Lite-On
Communications Inc LNE100TX (rev 20)
Subsystem: Lite-On
Communications Inc LNE100TX
Control: I/O- Mem-
BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort-
>SERR- <PERR+
Latency: 32
Interrupt: pin A
routed to IRQ 9
Region 0: I/O ports at 8800
[disabled] [size=256]
Region 1: Memory at d5800000
(32-bit, non-prefetchable) [disabled] [size=256]
Expansion ROM at <unassigned>
[disabled] [size=256K]
......
-----Original
Message-----
From:
wlug-bounces@mail.wlug.org [mailto:wlug-bounces@mail.wlug.org]
On Behalf Of Charles R. Anderson
Sent:
To:
Worcester Linux Users Group
Subject:
Re: [Wlug] RedHat 9 Network
Problem
On
>
Include your /etc/sysconfig/network-scripts/ifcfg-eth0 and your
>
/etc/sysconfig/network files in an email so we can
see what they look
like.
Also
include /etc/modules.conf and the Ethernet card entry
from the
"/sbin/lspci -vv" output.
_______________________________________________
Wlug
mailing list
Wlug@mail.wlug.org
http://mail.wlug.org/mailman/listinfo/wlug