Date: Wed, 1 Sep 2004 14:16:19 -0400 From: "John Stoffel" <stoffel@lucent.com>
"Robert" == Robert L Krawitz <rlk@alum.mit.edu> writes:
Robert, thank you for your *very* informative post! Robert> For Linux use, I would recommend the 2200 over the 960 hands Robert> down, if you can use Gimp-Print 5.0 (which is currently in Robert> beta). I have both of them. I consider myself qualified on Robert> this subject, as the Gimp-Print project lead. I'm very happy to use cutting edge software, I run a very upto date Debian setup. You'll have to build from source; the Debian packaging for 5.0 beta is currently broken. Robert> These printers are not the same; the 2200 uses UltraChrome Robert> inks (which are pigment-based) while the 960 uses Robert> conventional dye-based inks. Somewhat surprisingly, the Robert> 2200 has a wider gamut than the 960 (usually pigment inks Robert> have narrow gamut). However, it's not hard to get a good Robert> grayscale out of that printer. What other printers use these UltraChrome inks as well, which are (possibly) cheaper than the 2200? I don't think I need the bigger size, I'm mostly looking for a dedicated photo printer for home use, we already have the B&W laser for generic printing. I'm not even planning on using this new printer for color text prints. The only one that's cheaper is the R800, but that's currently marginally supported at best. In particular, it only operates in CMYK mode right now, and it's going to take me a while to get the red and blue inks (and gloss optimizer) working correctly. Robert> The 960, despite its tiny smallest drop size of 2 pl (vs. 4 pl Robert> for the 2200) does not produce as good output in my opinion. Robert> You really need to use the highest resolution (2880x1440) to Robert> get smooth texture, since printing with the 960 requires use Robert> of a lot of black ink. The 2200 has a "light black" (gray) Robert> ink that helps a lot, and in my experience you can get quite Robert> good quality even at 720 DPI and seldom need to go above Robert> 1440x720 DPI. There's a big performance difference right Robert> there! Sounds like a big difference in costs too, since you'll be using less ink. How important is the paper? Everything I've been reading says that using the Epson paper is really the only way to go. You're not using less ink at lower resolution. Paper is very important. I'd suggest the Epson papers, since the inks and papers are designed to work together. -- Robert Krawitz <rlk@alum.mit.edu> Tall Clubs International -- http://www.tall.org/ or 1-888-IM-TALL-2 Member of the League for Programming Freedom -- mail lpf@uunet.uu.net Project lead for Gimp Print -- http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton