Did the second drive completely fail or is it just a bad block? Does the array work at all? If the disk is marked bad (RAID metadata), then maybe you can mark it as ok, get the array online, and copy off as much data as possible (starting with the most important files first, of course). You may be able to dd the data per disk, skipping any bad blocks, to another disk and then possibly be able to access some of the array that way. And of course ... you do have a backup of that data somewhere, right? :) In general, some rules of thumb are: - RAID is not a replacement for backups - RAID 5 becomes more problematic as disk sizes + number of disks increase, look at something like RAID 6 (raid-dp, raidz2, whatever your implementation calls it) instead. - Be aggressive about fixing bad disks in order to shorten the catastrophe window. On Sat, Dec 18, 2010 at 1:03 PM, Eric Martin <eric.joshua.martin@gmail.com> wrote:
It's raid 5, and I can't recover the group because of a hd error on two disks. I wanted to see if I could move that data somewhere else to force a rebuild but it looks like a no. Oh well, to the backup drive.
On Sat, Dec 18, 2010 at 1:00 PM, Jason Couture <plaguethenet@gmail.com> wrote:
What kind of raid? If it was raid 5 I don't believe you can rebuild the array unless you have 2 surviving disks, so unless you can somehow recover one of the other two it would seem you are sol. Been a long time since I've done anything but 0, 1 and 0+1 so I could be wrong.
Sent from my android wireless device.
On Dec 18, 2010 12:48 PM, "Doug Mildram" <dmildram@gmail.com> wrote:
You're hosed (i think) unless
-- you're rich and you send the disks to a shop for megabucks (they may start with a trivial purchase of 2-3 identical model disks)
-- OR IF your problem was NOT the actual platters/heads, YOU obtain 1-2 same-model disks, swap the board from a replacement disk onto your hosed disk ( w/ sm torx tool and brave fingers )
I've not done this myself yet.
I HAVE had "stiction" problems where (after a power out or a "rest" so a disk bearing/lubricant gets a chance to harden) the disk just isnt spinning up. Of course, tapping/whacking it at the right/initial moment will usually cure that and you can feel if it's spinning or not....if you can hold it in your hand ...OR somehow get hands-on during powerup.
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug
-- Eric Martin
_______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug