Ok...I have it all figured out in my head, now i just need to start configuring the jobs. I was able to get a 2nd 35/70 drive, now DLT1 and DLT2 are options for my backups. I can't figure out how to have 1 job write to both either concurrently, or sequentailly as the job only allows me to pick 1 or the other. I tried using: Storage = DLT1, DLT2 and by having 2 Storage lines in my bacula-dir.conf, but neither worked. Any idea's? John Stoffel <john@stoffel.org> wrote: Just for grins, here's my output of 'mt -f /dev/nst0 status' on my DLT7k driver:
mt -f /dev/st0 status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x1b (DLT 35GB). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN
You can also run the bacula command 'btape' on there to make sure you've got things configured properly. John _______________________________________________ Wlug mailing list Wlug@mail.wlug.org http://mail.wlug.org/mailman/listinfo/wlug