Mar 25 09:28:33 pent584 kernel: SCSI subsystem driver Revision: 1.00 Mar 25 09:28:33 pent584 kernel: PCI: Found IRQ 10 for device 00:08.0 Mar 25 09:28:33 pent584 kernel: (scsi0) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 0/8/0 Mar 25 09:28:33 pent584 kernel: (scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs Mar 25 09:28:33 pent584 kernel: (scsi0) Warning - detected auto-termination Mar 25 09:28:33 pent584 kernel: (scsi0) Please verify driver detected settings are correct. Mar 25 09:28:33 pent584 kernel: (scsi0) If not, then please properly set the device termination Mar 25 09:28:33 pent584 kernel: (scsi0) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted Mar 25 09:28:33 pent584 kernel: (scsi0) during machine bootup.
This just means the card is set to detect if termination is in place. You can turn it off you have terminators on all the appropriate ends, but it doesn't really matter.
Mar 25 09:28:33 pent584 kernel: (scsi0) Cables present (Int-50 YES, Int-68 YES, Ext-68 YES) Mar 25 09:28:33 pent584 kernel: (scsi0) Illegal cable configuration!! Only two Mar 25 09:28:33 pent584 kernel: (scsi0) connectors on the SCSI controller may be in use at a time!
Apparently, you can only use 2 of the 3 connectors on the card (external 68-pin, internal 50-pin, and and internal 68-pin). I've never run into that one before, myself. You must choose, but choose... wisely. -b